• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.297-309
• /
• 2016

Grid-connected inverters (GCIs) with an LCL output filter have the ability of attenuating high-frequency (HF) switching ripples. However, by using only grid-current control, the system is prone to resonances if it is not properly damped, and the current distortion is amplified significantly under highly distorted grid conditions. This paper proposes a synchronous reference frame equivalent proportional-integral (SRF-EPI) controller in the αβ stationary frame using the parallel virtual resistance-based active damping (PVR-AD) strategy for grid-interfaced distributed generation (DG) systems to suppress LCL resonance. Although both a proportional-resonant (PR) controller in the αβ stationary frame and a PI controller in the dq synchronous frame achieve zero steady-state error, the amplitude- and phase-frequency characteristics differ greatly from each other except for the reference tracking at the fundamental frequency. Therefore, an accurate SRF-EPI controller in the αβ stationary frame is established to achieve precise tracking accuracy. Moreover, the robustness, the harmonic rejection capability, and the influence of the control delay are investigated by the Nyquist stability criterion when the PVR-based AD method is adopted. Furthermore, grid voltage feed-forward and multiple PR controllers are integrated into the current loop to mitigate the current distortion introduced by the grid background distortion. In addition, the parameters design guidelines are presented to show the effectiveness of the proposed strategy. Finally, simulation and experimental results are provided to validate the feasibility of the proposed control approach.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.401-414
• /
• 2013

HTR50S is a small modular reactor system based on HTGR. It is designed for a triad of applications to be implemented in successive stages. In the first stage, a base plant for heat and power is constructed of the fuel proven in JAEA's $950^{\circ}C$, 30MWt test reactor HTTR and a conventional steam turbine to minimize development risk. While the outlet temperature is lowered to $750^{\circ}C$ for the steam turbine, thermal power is raised to 50MWt by enabling 40% greater power density in 20% taller core than the HTTR. However the fuel temperature limit and reactor pressure vessel diameter are kept. In second stage, a new fuel that is currently under development at JAEA will allow the core outlet temperature to be raised to $900^{\circ}C$ for the purpose of demonstrating more efficient gas turbine power generation and high temperature heat supply. The third stage adds a demonstration of nuclear-heated hydrogen production by a thermochemical process. A licensing approach to coupling high temperature industrial process to nuclear reactor will be developed. The low initial risk and the high longer-term potential for performance expansion attract development of the HTR50S as a multipurpose industrial or distributed energy source.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1658-1671
• /
• 2017

To address the inaccurate load demand sharing problems among parallel inverter-interfaced voltage-controlled distributed generation (DG) units in islanded microgrids (MGs) with different DG power ratings and mismatched feeder impedances, an enhanced voltage control scheme based on the active compensation of circulating voltage drops is proposed in this paper. Using the proposed strategy, reactive power and harmonic currents are shared accurately and proportionally without knowledge of the feeder impedances. Since the proposed local controller consists of two well-separated fundamental and harmonic voltage control branches, the reactive power and harmonic currents can be independently shared without having a remarkable effect on the amplitude or quality of the DGs voltage, even if nonlinear (harmonic) loads are directly connected at the output terminals of the units. In addition, accurate load sharing can also be attained when the plug-and-play performance of DGs and various loading conditions are applied to MGs. The effects of communication failures and latency on the performance of the proposed strategy are also explored. The design process of the proposed control system is presented in detail and comprehensive simulation studies on a three-phase MG are provided to validate the effectiveness of the proposed control method.

• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.85-90
• /
• 2018

Blockchain technology provides distributed trust structure; with this, we can implement a system that cannot be forged and make Smart Contract possible. With blockchain technology emerging as next generation security technology, there have been studies on authentication and security services that ensure integrity. Although Internet-based services have been going with user authentication with password, the information can be stolen through a client and a network and the server is exposed to hacking. For the reason, we suggest blockchain technology and OTP based authentication mechanism to ensure integrity. In particular, the Two-Factor Authentication is able to ensure secure authentication by combining OTP authentication and biometric authentication without using password. As the suggested authentication applies multiple hash functions and generates transactions to be placed in blocks in order for biometric information not to be identified, it is protected from server attacks by being separate from the server.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2021

In this study, the design methodology of LCL filter for grid-connected three-phase inverter was studied. First, the advantages and disadvantages of applying typical filter structures as a filter for grid connection of a three-phase inverter were analyzed. Next, filter design methodologies for grid connection of a three-phase inverter were analyzed, and an effective filter design methodology was determined to satisfy the harmonic requirements in grid connection. In order to verify the effectiveness of the design methodology, EMTP models such as a three-phase inverter, a three-phase LCL filter, and a performance evaluation system to evaluate the performance of the designed filter were developed using EMTP-RV. Next, an LCL filter was designed for an application example of a three-phase inverter, and the waveforms of the output voltage and outage current of the three-phase inverter were checked through EMTP-RV simulation work. In particular, the validity of the design methodology was verified by confirming that the magnitude of the current ripple was reduced to a limited magnitude through waveform analysis of the output current.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.71-71
• /
• 2019

The genus Cenchrus (Poaceae), containing ca. 23 species, is distributed throughout Australia, Africa, Indian sub-continent, and America. In Korea, Cenchrus longispinus (Hack.) Fernald, especially introduced to Daecheong Island in 1999, is one of the most hazardous invasive plant which causes serious environmental threats, biodiversity damages and physically negative impact on humans and animals. Based on the next-generation sequencing (NGS) technology, we characterized the chloroplast (cp) genome sequences of C. longispinus which contains a large single copy (LSC; 80,223 bp), a small single copy (SSC; 12,449 bp), separated by a pair of inverted repeats (IRs; 22,236 bp). Additionally, we analyzed the cp genome sequences of Cenchrus echinatus L. which contains a large single copy (LSC; 80,220 bp), a small single copy (SSC; 12,439 bp), separated by a pair of inverted repeats (IRs; 22,236 bp). These cp genomes consist of 75 unique genes, 4 rRNA coding genes, 33 tRNA coding genes and 21 duplicated in the IR regions, of which the gene content and organization are similar to the other Poaceae cp genomes. We selected 40 potential regions in cp genomes of two Cenchrus species and one Korean Pennisetum species to develop new single nucleotide polymorphism (SNP) markers for identifying C. longispinus based on amplification-refractory mutation system (ARMS) technique. The markers, inferred from SNP in matK and ndhF genes, show effectiveness to recognize C. longispinus from C. echinatus and Korean native species Pennisetum alopecuroides (L.) Spreng.

• International Journal of Computer Science & Network Security
• /
• v.21 no.4
• /
• pp.255-263
• /
• 2021

Smart grid is a fully-automated, bi-directional, power transmission network based on the physical grid system, which combines sensor measurement, computer, information communication, and automatic control technology. Blockchain technology, with its security features, can be integrated with Smart Grids to provide secure and efficient power management and transmission. This paper dicusses the deployment of Blockchain technology in Smart Grid. It presents application areas and protocols in which blockchain can be applied to in securing smart grid. One application of each area is explored in detail, such as efficient peer-to-peer transaction, lower platform costs, faster processes, greater flexibility in power generation to transmission, distribution and power consumption in different energy storage systems, current barriers obstructing the implementation of blockchain applications with some level of maturity in financial services but concepts only in energy and other sectors. Wide range of energy applications suggesting a suitable blockchain architecture in smart grid operations, a sample block structure and the potential blockchain technicalities employed in it. Also, added with efficient data aggregation schemes based on the blockchain technology to overcome the challenges related to privacy and security in the smart grid. Later on, consensus algorithms and protocols are discussed. Monitoring of the usage and statistics of energy distribution systems that can also be used to remotely control energy flow to a particular area. Further, the discussion on the blockchain-based frameworks that helps in the diagnosis and maintenance of smart grid equipment. We have also discussed several commercial implementations of blockchain in the smart grid. Finally, various challenges have been discussed for integrating these technologies. Overall, it can be said at the present point in time that blockchain technology certainly shows a lot of potentials from a customer perspective too and should be further developed by market participants. The approaches seen thus far may have a disruptive effect in the future and might require additional regulatory intervention in an already tightly regulated energy market. If blockchains are to deliver benefits for consumers (whether as consumers or prosumers of energy), a strong focus on consumer issues will be needed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.299-308
• /
• 2022

Recent, energy transition policies are driving to increase in the number of small photovoltaic(PV) generators. It is difficult for system operators to accurately anticipate the amount of power generated from such small scale PV generation, and this may disrupt dispatch schedules and result in an increase in cost. The need for a Virtual Power Plant(VPP) is emerging as a way of resolving these problems, as it would integrate small-scale PV plants and eliminate uncertainty about the amount of power generated, control voltage, and provide power reserves. In this paper, the cost evaluation methods are described for determination of VPP cloud charges both Net Present Value(NPV) method and Profitability Index(PI) method, the calculated outcomes of the two types of cost evaluation methods are presented in detail. It seems we secure profitability as we get 1.22 of profitability index from calculation results, it may be attractive for the aggregator as NPV is enough for satisfying profitability.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.1
• /
• pp.371-401
• /
• 2022

If the blockchain means storing information in a distributed environment that cannot be forged or altered, it is mentioned that this is similar to what librarians collect, preserve, and share authoritative information. In this way, this study examined blockchain technology as a way to collect and provide reliable information, increase work efficiency inside and outside the library, and strengthen cooperative networks. This study attempted to propose various ways to utilize blockchain technology in book relations based on literature surveys and case studies in other fields. To this end, this study first analyzed the field and cases of blockchain application to confirm the possibility and value of blockchain application in the library field, and proposed 12 ways to utilize it based on this. The utilization model was proposed by dividing it into operation and service sectors. In the operation sector, it is a digital identity-based user record storage and authentication function, transparent management and traceable monitoring function, voting-based personnel and recruitment system, blockchain governance-based network efficiency function, and blockchain-based next-generation device management and information integration function. The service sector includes improved book purchase and sharing efficiency due to simplification of intermediaries, digital content copyright protection and management functions, customized service provision based on customer behavior analysis, blockchain-based online learning platforms, sharing platforms, and P2P-based reliable information sharing platforms.