• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1372-1383
• /
• 1998

In this paper, modeling for DC and AC characteristics analysis of DFB-LD was performed considering effects of .lambda./4-shifted gratingandspatial hole burning within a laser diode cavity. From the simulation for DC characteristics, Light-Current curve, optical power distribution and carrier density distribution within the cavity can be obtained. The simulation for AC characteristics porovides IM response and the amplitude and phase and the amplitude and phase response of FM with excellent accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2285-2290
• /
• 2011

This paper is the research on SMSR yield improvement of the optical transceiver using modulated DFB laser. In general, the wavelength of DFB laser optical transceiver are 1310, 1490 and 1550 nm. Usually SMSR in modulated DFB is difficult to improve as low as 30 dB because of high slop efficiency trade off. In modulation condition, we studied SMSR improvement according to adjust bias current, extinction ratio and optical line terminal receiver sensitivity. As our test results, we can found a method how to improve SMSR for optical transceiver for long distance.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.92-98
• /
• 1998

The transform limited optical short pulses are generated by compression of pulses from a gain switched distributed feedback laser at 5 GHz repetition rate. The gain-switched pulses have the minimum pulse width of 27 psec with the spectral width of 1.1 nm. Thus the output pulses have a large amount of linear chirp and nonlinear chirp. We suppress the nonlinear chirp by passing the pulses through the optical band pass filter with 3 dB band width of 0.55 nm which is narrower than spectral width of the input pulses and generate 7.1 psec pulses by compressing the output with the dispersion compensating fiber. The pulses have time-bandwidth product of 0.49 which is close to the transform limited gaussian pulse. These pulses can be utilized as optical sources in 40 Gbit/s time division multiplexed optical transmission system.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.111-114
• /
• 2001

Optical transmitter and receiver are the essential components for optical communication. For these components, butterfly type packages are used which are comprised of metal housing, multilayer ceramic inserts, lead and window. In this study, 2.5 Gbps DFB(Distributed -Feedback) LD(Laser Diode) package was fabricated and characterized. Metal housing showed good thermal conductivity (200W/mK) and well matched TCE(6.7ppm/K) with GaAs chip. Ceramic inserts also showed good VSWR(Voltage Standing Wave Ratio) characteristics(<2.0). By brazing technology, all the elements were combined and sealed. RF characteristics of the package mounted on the PWB was also tested.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.469-472
• /
• 1998

InGaAsP/InP ridge waveguide(RWG) distributed feedback(DFB) lasers (LD) operating at 1.55.mu.m were fabricated by a two step MOCVD process. The CW laser threshold and the slope efficiency from these lasers are 22.5mA and 0.127mW/MA perfacet at room temperature. Single longitudinal mode operation with side mode suppression of more than 30dB is obtained at 5mW. The temperature sensitivity and characteristic temperature (T$_{0}$) from DFB lasers were obtained 1.0.angs./.deg. C and 50.3K between 20.deg. C and 70.deg. C, respectively.y.

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.5-8
• /
• 2001

In this work, we studied the effect of chirped grating on optical bistability in λ/4-shifted semiconductor distributed-feedback(DFB) devices, such as an etalon with nonlinear mirrors, a λ/4-shifted DFB waveguide and aλ/4-shifted DFB laser amplifier. We found that chirped DFB devices exhibit bistable switching at a lower input power.OCIS code : 050.2770, 190.1450, 190.5970, 230.0230.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.765-769
• /
• 2009

In this paper, we present the fabrication of 40 Gb/s traveling-wave electroabsorption modulator-integrated laser (TW-EML) modules. A selective area growth method is first employed in 40 Gb/s EML fabrication to simultaneously provide active layers for lasers and modulators. The 3 dB bandwidth of a TW-EML module is measured to be 34 GHz, which is wider than that of a lumped EML module. The 40 Gb/s non-return-to-zero eye diagram shows clear openings with an average output power of +0.5 dBm.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.296-299
• /
• 2008

최근 통신시스템과 핸드폰, PDA등의 통신기기들의 발전에 따라 사용자들은 높은 데이터 전송률과 고속의 통신서비스를 요구하고 있다. 이러한 상황에서 유 무선 통합 시스템인 Radio-over-Fiber(RoF) 시스템은 그 대안으로 대두되고 있다. 본 논문에서는 광전자소자를 선 왜곡 방식에 적용하여 광 송신기의 선형성을 향상시키는 방법을 제안하였다. 선 왜곡 방식은 두 개의 루프로 구성되어 있으며, 광 부품인 레이저 다이오드와 포토 다이오드 그리고 RF 부품인 위상변위기, 감쇄기, RF 결합/분배기, RF 증폭기를 사용하였다. 메인 루프에서 주 레이저 다이오드의 비선형성에 의해 발생된 왜곡신호성분은 보조 루프에서 부 레이저 다이오드를 이용하여 추출된 선 왜곡신호에 의해서 제거된다. 제안된 선형화 기법을 적용하여 2.4 GHz에서 선형화 기법을 적용하기 전보다 3차 상호변조 왜곡성분이 약 30dB 향상된 결과를 얻었다.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.665-674
• /
• 2016

We designed and fabricated a semiconductor optical amplifier-integrated dual-mode laser (SOA-DML) as a compact and widely tunable continuous-wave terahertz (CW THz) beat source, and a pin-photodiode (pin-PD) integrated with a log-periodic planar antenna as a CW THz emitter. The SOA-DML chip consists of two distributed feedback lasers, a phase section for a tunable beat source, an amplifier, and a tapered spot-size converter for high output power and fiber-coupling efficiency. The SOA-DML module exhibits an output power of more than 15 dBm and clear four-wave mixing throughout the entire tuning range. Using integrated micro-heaters, we were able to tune the optical beat frequency from 380 GHz to 1,120 GHz. In addition, the effect of benzocyclobutene polymer in the antenna design of a pin-PD was considered. Furthermore, a dual active photodiode (PD) for high output power was designed, resulting in a 1.7-fold increase in efficiency compared with a single active PD at 220 GHz. Finally, herein we successfully show the feasibility of the CW THz system by demonstrating THz frequency-domain spectroscopy of an ${\alpha}$-lactose pellet using the modularized SOA-DML and a PD emitter.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, we have developed a simulation software and analysed beam profiles of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. As the phases of the index and gain gratings on the mirror faces are varied, the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/p_r are analysed and examined. In order to reduce the threshold current of a lasing mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phases on the mirror faces.