• 소음진동
• /
• 제4권3호
• /
• pp.365-375
• /
• 1994

Periodic longitudinal vibrations of a video and audio tape and the like used for transducing pictures and sounds may be induced by self-excited vibrations which are caused by frictions against the heads and guides, and their eccentricity, noncircularity or irregularity. It is important to analyze the longitudinal vibration of a tape because it causes distortions of a reproduced signal. It is difficult to measure directly the longitudinal vibration. In this paper a method estimating longitudinal vibration using impulse responses in the transverse direction is presented. And, the parameters boundary domain where the transverse and longitudinal vibration can be decoupled is introduced. In the domain where the both vibrations are decoupled, analytic methods using frequency characteristics and transient responses of the transverse vibration, respectively, are presented. The time domain method predicted more exactly the instantaneous phase of the longitudinal vibration than frequency domain method did.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.102-108
• /
• 2010

Projection microstereolithography is a process of fabricating a micro-structure by using dynamic mask such as digital micromirror device(DMD). DMD shapes the beam into cross-sectional image of structure. Photocurable resin is cured by the beam and stacked layer on top of layer. It is difficult to deliver the beam from the DMD to the photocurable resin without any distortions. We assume that the beam exposed to the resin by 1 pixel of DMD has Gaussian distribution, so the shaped beam reflected by the DMD affects its neighboring area. Curing pattern corresponding to a cross-sectional images is predicted by superposition of pixels of Gaussian distribution and it is similar to cured shape.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.542-542
• /
• 2002

Geometric correction is a critical step to remove geometric distortions in satellite images. For correct geometric correction, Ground Control Points (GCPs) have to be chosen carefully to guarantee the quality of corrected satellite images. In this paper, we present an automatic approach for geometric correction by constructing GCP Chip database (GCP DB) that is a collection of pieces of images with geometric information. The GCP DB is constructed by exploiting Landsat's nadir-viewing property and the constructed GCP DB is combined with a simple block matching algorithm for efficient GCP matching. This approach reduces time and energy for tedious manual geometric correction and promotes usage of Landsat images.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.3-7
• /
• 1999

The images of the meteorological satellite NOAA contain geometrical distortions caused by its ambiguous position, its vibration, its sensor's movement, and so on. Geometric correction of satellite images is one of the most important parts in many remote sensing as the primary processing. Ground control points (GCP's) are necessary to check the accuracy of geometric correction and used for precise geometric correction. In this paper, a method for automatically selecting the residual error is presented. Calculating the effective angle and residual errors vector using the succeeded matching GCP's, precise geometric correction using an affine transformation is applied to systematically a corrected image. And the error is decreased by an affine transformation. The above enable the geometric correction of high quality.

• 대한음성학회지:말소리
• /
• 제65호
• /
• pp.81-91
• /
• 2008

In this paper, we propose a new variable bit-rate speech coder based on the waveform interpolation concept. After the coder extracted all parameters, the amounts of the distortions between the current and the predicted parameters which are estimated by extrapolation using past two parameters are measured for all parameters. A parameter would not be transmitted unless the distortion exceeds the preset threshold. At the decoder side, the non-transmitted parameter is reconstructed by extrapolation with past two parameters used to synthesize signals. In this way, we can reduce 26% of the total bit rate while retaining the speech quality degradation below 0.1 PESQ score.

• 한국멀티미디어학회논문지
• /
• 제8권12호
• /
• pp.1581-1588
• /
• 2005

The primary goal of this paper is to facilitate the rate-distortion control in compressed domain, without introducing a full decoding and re-encoding system in pixel domain. For this aim, the error propagation behavior over several frame-sequences due to DCT coefficients-drop is investigated on the basis of statistical and empirical properties. Then, such properties are used to develop a simple estimation model for the CD distortion accounting for the characteristics of the underlying coded-frame. Experimental results show that the proposed model allows us to effectively control rate-distortions into coded-frames over different kinds of video sequences.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.298-305
• /
• 2012

In this paper, we propose an integrated algorithm for scene recognition, which has been a challenging computer vision problem, with application to mobile robot localization. The proposed scene recognition method utilizes SIFT and visual words as local-level features and GIST as a global-level feature. As local-level and global-level features complement each other, it results in improved performance for scene recognition. This improved algorithm is of low computational complexity and robust to image distortions.

• 한국통신학회논문지
• /
• 제31권9C호
• /
• pp.876-881
• /
• 2006

In this paper, we propose a complex-valued IIR filter for digital VSB signals based on CMA in order to efficiently mitigate multipath distortions, especially the leakage from the quadrature component. The proposed equalizer overcomes the drawback of the conventional real-valued IIR equalizers that it attempts to equalize Hilbert transform of quadrature component. We demonstrate via simulation that the proposed complex IIR filter successfully mitigates the leakages from the quadrature component, while the conventional real IIR filter requires a longer IIR filter to achieve the same performance. We present cost function analysis for a simple two-tap case showing that the proposed IIR equalizer with CMA for VSB signals has a global minimum at the desired location.

• Journal of Power Electronics
• /
• 제7권4호
• /
• pp.328-335
• /
• 2007

A conventional Single-Stage Power-Factor-Correction (PFC) AC/DC converter has a link capacitor voltage problem under high line input and low load conditions. In this paper, this problem is analyzed by using the voltage conversion ratio of the DC/DC conversion cell. By applying this analysis, a new Single-Stage PFC AC/DC converter with a boost PFC cell integrated with a Voltage-Doubler Rectified Asymmetrical Half-Bridge (VDRAHB) is proposed. The proposed converter features good power factor correction, low current harmonic distortions, tight output regulations and low voltage of the link capacitor. An 85W prototype was implemented to show that it meets harmonic requirements and standards satisfactorily with near unity power factor and high efficiency over universal input.