• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.401-408
• /
• 2001

The main objective of this study is to analyze the distortion of curved steel box girders. For the distortional analysis of steel box girders, two approaches are presented. One is the development of approximate formulas obtained by applying Ritz method. The other is the formulation of stiffness matrix which is derived from the exact solution of the differential equation for distortion. Distortional analysis is carried out by utilizing 3-dimensional elements of a structural analysis computer program (SAP2000). The present analysis focuses on the distortional stress and the effects of the diaphragm. The results of several example cases are compared with those by the Nakai, Sakai, Heins, and Oleinik's theory and get the effect of diaphragm spacing on the distortional warping stress of the curved steel box girder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.527-534
• /
• 1987

Two phase voltage controlled oscillation was realized by using the Electronic analog simulation of nonlinear simultaneous 2st order equation in terms of vibration and it's usefullness was sustined. Sinde it is complex and expensive to implement the circuits actually which composits and multiplicate the two phase signal squared respectively, this paper is obtained the simplificotion and switching circuit. The circuit introducced in this paper had propotionality of frequency to control input voltage, rapid response time, and little phase error, also this circuit operated with very low THD(Total Harmonic Distortion) and constant amplitude at higher than 10 :1 of frequency ratio.

• Kyungpook Mathematical Journal
• /
• v.46 no.4
• /
• pp.543-552
• /
• 2006

The purpose of the present paper is to introduce two novel subclasses $\mathcal{T}_{\mu}(n,{\lambda},{\alpha})$ and $\mathcal{H}_{\mu}(n,{\lambda},{\alpha};{\kappa})$ of analytic and univalent functions with negative coefficients, involving Ruscheweyh derivative operator. The various results investigated in this paper include coefficient estimates, distortion inequalities, radii of close-to-convexity, starlikenes, and convexity for the functions belonging to the class $\mathcal{T}_{\mu}(n,{\lambda},{\alpha})$. These results are then appropriately applied to derive similar geometrical properties for the other class $\mathcal{H}_{\mu}(n,{\lambda},{\alpha};{\kappa})$ of analytic and univalent functions. Relevant connections of these results with those in several earlier investigations are briefly indicated.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.112-114
• /
• 1994

When an electron is transferred to $C_{60}$, the bond structure is distorted due to the electron-lattice interaction and a polaron-like state is formed. The evolution process of the bond distortion is studied by the dynamical equation of atomic lattice, and time-dependent changes of the bond lengths are determined. Then it can be estimated that the relaxation time to form the polaron-like state is a fraction of a picosecond.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.1
• /
• pp.12-27
• /
• 2007

This fundamental studies on for the productivity improvement and laborsaving of purse seine fishery. Given the difficulty posed from the distortion of net shape caused by the external forces, such as tide, at the time of shooting and pursing, we set the 4 steps of 0, 2, 4 and 6cm/sec in flow velocity in the flume tank for the experiment in order to examine those characteristics. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, and interpreted the characteristics of several motion in water, such as the shape of seine, the change in tension and area during pursing and its the analysis results are as follows. Though the experiment could be conducted up to 6cm/sec of flow velocity that was defined, the experiment could not go on because of the severe distortion in the seine at the flow velocity in excess of 6cm/sec. As for the depth of leadline and reduction rate of side area of seine when the pursing is connected, P seine turned out to be slightly higher than T seine, and the hauling speed and reduction rate of upper area of seine were found similar to each other. The correlation between the hauling time (Ht) and depth of lead line (Dhp, Dht) of P seine and T seine can be expressed by the equation, that is, Dhp=(0.99Pt-7.63)Pt+69.01, Dht=(1.03Pt-7.73)Pt+66.74. The correlation between the hauling time and hauling velocity (Hpp, Hpt) can be expressed by the equation, that is, $Hpp=-0.06Ht^2+0.88Ht+0.78,\;Hpt=-0.05Ht^2+0.81Ht+0.98$ here, Pt is pursing time. And the correlation between the pursing time and the reduction rate of side area (sArp, sArt) can be expressed by the equation, that is, $sArp=-0.48Pt^2+14.79Pt-16.74,\;sArt=-0.45Pt^2+14.56Pt-16.48$. The reduction rate of upper area of seine (tArp, tArt) can be expressed by the equation, that is, $tArp=0.34Pt^2-0.66Pt-0.74,\;tArt=0.34Pt^2-0.27Pt-1.80$. In addition, the correlation between the pursing time and tension of purse line (Tep, Tet) can be expressed by the equation, that is, $Tep=2.79Pt^2+2.26Pt-0.60,\;Tet=2.14Pt^2+8.08Pt-27.50$.

• Structural Engineering and Mechanics
• /
• v.2 no.1
• /
• pp.113-123
• /
• 1994

A method for computing the elastic buckling prestressing force of a post-tensioned composite steel-concrete tee-beam is presented. The method is based on a virtual work formulation, and incorporates the restraint provided by the concrete slab to the buckling displacements of the steel beam. The distortional buckling solutions are shown to be given by a quadratic equation. The application of the analysis to calculation buckling strengths is given, based on codified rules for beam-columns. Conclusions are then drawn on the importance of distortional buckling when a post-tensioned composite beam is stressed during jacking.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.3-6
• /
• 1990

The impact of the convected charges, which is caused by the electrification phenomina, in the oil-paper insulation systems of power transformers has been numerically investigated using FEM. The potential distribution of the oil-paper insulation system is assumed to be governed by three equations instead of the classical Laplace equation. When the charge density of oil and the conduction current are kept high, the field distortion or the interrace in a power transformer is considerably distorted due to the convected charges.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.227-232
• /
• 1996

The one-third calibrating relation by steady solution can cause large error when applied to an unsteady flow with large amplitude waves. Extended calibrating method, which can treat the normal convective contribution, is developed. The normal mass convective term is included into the 2-D mass transport equation by means of rms value and random function. The unknown shear rate is numerically determined by solving the 2-D mass transport equation inversely. This recovery method which predicts the unknown shear rate is constructed. It is found that it works very well without distortion. The inclusion of the normal convective term has a negligible effect on the mass transfer coefficient.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.159-165
• /
• 1997

Because CCD camera acquires the digital images without separate processing, its availabilities are increased. In this study, for CCD camera calibration DLT equation and radial or decentering distortion equation are combined and the calibration parameters are calculated using three dimensional test model. The digital images acquired by CCD camera are matched using coefficient of correlation and the three dimensional coordinates of objects are determined. Also, the potential usefulness of CCD camera in close range photogrammetry is examined.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4108-4125
• /
• 2015

This paper presents a scalable coding method for depth images by considering the quality of synthesized images in virtual views. First, we design a new edge detection algorithm that is based on calculating the depth difference between two neighboring pixels within the depth map. By choosing different thresholds, this algorithm generates a scalable bit stream that puts larger depth differences in front, followed by smaller depth differences. A scalable scheme is also designed for coding depth pixels through a layered sampling structure. At the receiver side, the full-resolution depth image is reconstructed from the received bits by solving a partial-differential-equation (PDE). Experimental results show that the proposed method improves the rate-distortion performance of synthesized images at virtual views and achieves better visual quality.