• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1693-1700
• /
• 2012

최근 차량 운전자들의 안전 운행을 보조하기 위해 운전자의 차량과 전방의 차량 간의 거리를 추정하고 안전거리 유무를 알려주기 위한 경보시스템이 개발되고 있다. 본 논문에서도 실제 도로 환경에서 전방의 주행 차량을 검출하여 차간 거리를 측정하고, 충돌 위험 상황을 감지하여 운전자에게 충돌 위험을 알리는 충돌경고시스템을 설계 및 구현하였다. 먼저 전방주시 카메라를 활용하여 촬영한 도로영상으로부터 도로와 차량에 해당하는 관심 영역을 추출하고, 관심 영역에서 전방 차량의 그림자 임계값 분석을 통해 전방 차량 객체를 추출한 후 전방 차량과의 거리를 계산하여 충돌 위험 경고를 알려준다. 주행 차량 검출 및 차간 거리 측정 결과를 기반으로 충돌경고시스템을 설계 및 구현하였으며, 실제 도로상황에 적용하여 실험한 결과 매우 높은 정확도를 나타내어 안전 운전에 대응할 수 있는 것으로 검증되었다.

• 인터넷정보학회논문지
• /
• 제3권3호
• /
• pp.11-17
• /
• 2002

웹을 통한 원격교육은 시간과 공간의 문제를 극복할 수 있다는 큰 장점에도 불구하고 강의실 및 집합교육에 비해 연수생 관리가 취약하다는 문제점을 지니고 있다. 이러한 문제는 원격교육활동의 성취수준 및 목표도달에 대한 커다란 장애로 부담이 되고 있고 원격교육담당자에게 많은 고민을 안겨주고 있다. 원격교육담당자는 원격교육활동에 대한 연수생의 참여와 반응을 계속적으로 모니터링 해야 하고 이에 대한 적절한 피드백을 연수생에게 제공하여야 함에도 불구하고 기존의 원격교육시스템은 교수학습활동에 중점을 둔 나머지 원격교육활동에 대한 효율적 관리기능을 제공하지 못하고 있다. 따라서 본 논문에서는 원격교육의 일환으로 실시되고 있는 원격교원연수의 효율적 운영이 가능하며 교원연수가 목표로 하는 성취수준의 효과적 달성을 위해 원격교원연수의 적합한 관리요소를 추출하고 이를 시스템 또는 연수 관리자가 연수과정에 적용하여 연수생에 대한 적절한 피드백의 제공이 가능한 원격교원연수 관리시스템을 효율적으로 구현하였으며 교육과정과 컴퓨팅 환경에 따라 시스템의 유연한 변경도 가능하게 되었다.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.1021-1030
• /
• 2016

The runner system of the injection mould and the injection volume of the injection molding process greatly affect the quality of the produced part. The goal of this paper is the design of the runner system and the prediction of the injection volume for the injection moulding of a housing part of small-size air cleaner to improve the formability through the three-dimensional injection moulding analysis. The effects of the runner system of the mould on the injection moulding characteristics are investigated. From the results of the investigation, a proper design of the runner system with uniform filling characteristics and the minimized defect formation is obtained. In addition, the influence of the moving distance of the screw on filling characteristics, weldline formation and deformation characteristics is examined. From the results of the examination, an appropriate moving distance of the screw for the housing part of small-size air cleaner is estimated.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.62-65
• /
• 2003

We propose the Distance Communication System that is not only Making Distance Learning Contents but also controlling intellectual moving object. In order to make Distance Learning Contents (Video Contents), we must follow the motion of lecturer. In the former Systems and a person operates Video-Camera because it's not enough to follow the motion, In this research and we make the systems that can match the motion of lecturer naturally. The systems use Intelligent Space software and so the systems recognize lecturer's motion automatically and order Pan/Tilt-Type Camera to follow the motion. And we made possible to operate an intellectual moving object with application of this system.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.371-379
• /
• 2001

We have reported the new measurement system which was substituted digital filter for the analog filter in order to develop the optimal system that could find the time delay between each sensors with high accuracy. And also we have confirmed through the experiments that the accuracy of measurements were differentiated by the methods what kind of digital filter had been adopted. This paper suggests two algorithms which approximate the sound source's bearing and distance. One is that sound source's relative bearing can be approximately regarded as the gradient of hyperbolic asymptote, the other is that the source's range can be approximated under the condition of a long range source relative to the sensor's interval. And a series of experiments were carried out with the source's distance 22.42meters and the random bearing interval within the limits of $-90^{\circ}$~$+90^{\circ}$. As a result, we have recognized that the approximation methods could measure the bearing and distance with higher accuracy than the method using trigonometric relation could do.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.305-308
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band and a microprocessor. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated 긴ta bits with stored data bits in a PC connected with demodulator. The RF module in the experiments works oかy in the bandwidth, 424MHz - 429MHz. with FM mode. The signal level degrades as the distance between transmitter and receiver increases we measured the signal level and bit error in the building of engineering college of our university. we present the measured data with various locations in the building. and the data may be used in design short distance network in a building.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.373-376
• /
• 2007

As a part of automatic car parking, this paper have devised the distance measurement algorism using stereo vision system which measure between object and parking lot. In this simulation, laser pointer is used for detecting edge of designated object and real distance is measured by searching the position of laser pointer and measuring the distance. Which are 1 / 1.5 / 2 / 2.5 / 3m and adjusted correction had applied in order for use in car parking system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.121-124
• /
• 1990

Distance relaying is one of the most commonly used protection schemes in the high voltage transmission systems. In this scheme, coordination between the primary and backup relays is very critical for the power system security. This paper reports an rule-based methodology for checking and correction of miscoordination problems in the distance relaying. Diagnosis rules achieving an accurate but simple checking have been developed through the geometric analysis of the impedance characteristics of the distance relays. Heuristic rules having the pratical power for miscoordination correction are suggested. The proposed method has proved very effective through the several case studies on the actual systems.

• 공학교육연구
• /
• 제13권2호
• /
• pp.7-11
• /
• 2010

As the development of the computer and communication technologies, the ubiquitous society can be realized to the world early in the future. Thus, the localization system in Wireless Personal Area Network (WPAN) is required for many users of ubiquitous society to provide the ubiquitous computing based applications in respective of anytime and anywhere. In this paper, we propose the distance measurement scheme that is based on the distance measurement using RSSI (Received Signal Strength Indicator) of sensor module considering of two distance conditions for the localization system using Zigbee in WPAN. Also, the localization errors of the proposed scheme are analyzed in the three scenarios that the mobile module tracks in the in $6m{\times}6m$ scaled experimentation area. In addition to this, the monitoring subsystem is developed using GUI (Graphical User Interface) in order to monitor the location of the moving objects accurately and user-friendly.