• 정보저장시스템학회논문집
• /
• 제3권3호
• /
• pp.126-128
• /
• 2007

일반적으로 주어진 하나의 H matrix 로 다수의 코드율을 가지는 코드화가 가능하다. 하지만 Low Density Parity Check(LDPC) 코드의 H matrix는 H matrix 내의 1의 개수와 위치에 따라 그 성능이 달라짐으로 해서 하나의 H matrix로 다수의 코드율을 대응하기 위한 설계 방법이 요구된다. H matrix 의 성능은 일반적으로 girth나 minimum distance에 의해 좌우되고 H matrix의 1의 위치에 따라 달라진다. 본 논문에서는 H matrix의 girth 와 minimum distance에 입각한 다수 개의 코드율이 대응 가능한 LDPC code의 H matrix 설계 방법을 제시하고자 한다. 이렇게 함으로써 하나의 H matrix로 다수의 코드율에 따른 각각의 성능을 일정 수준 이상 유지하는 multi-rate LDPC code가 가능하다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권8호
• /
• pp.2833-2850
• /
• 2014

This paper proposes a novel framework for traffic video classification based on chaotic features. First, each pixel intensity series in the video is modeled as a time series. Second, the chaos theory is employed to generate chaotic features. Each video is then represented by a feature vector matrix. Third, the mean shift clustering algorithm is used to cluster the feature vectors. Finally, the earth mover's distance (EMD) is employed to obtain a distance matrix by comparing the similarity based on the segmentation results. The distance matrix is transformed into a matching matrix, which is evaluated in the classification task. Experimental results show good traffic video classification performance, with robustness to environmental conditions, such as occlusions and variable lighting.

• Journal of Communications and Networks
• /
• 제17권6호
• /
• pp.634-646
• /
• 2015

Assuming perfect channel state information (CSI) at the transmitter and receiver, the optimization problem of maximizing the minimum Euclidean distance between two received signals by a linear precoder is considered for multiple-input multiple-output (MIMO) systems with arbitrary dimensions and arbitraryary quadrature amplitude modulation (QAM) input. A general precoding framework is first presented based on the Gram matrix, which is shown for 2-dimensional (2-D) and 3-dimensional (3-D) MIMO systems when employing the ellipse expanding method (EEM). An extended precoder for high-dimensional MIMO system is proposed following the precoding framework, where the Gram matrix for high-dimensional precoding matrix can be generated through those chosen from 2-D and 3-D results in association with a permutation matrix. A complexity-reduced maximum likelihood detector is also obtained according to the special structure of the proposed precoder. The analytical and numerical results indicate that the proposed precoder outperforms the other precoding schemes in terms of both minimum distance and bit error rate (BER).

• Journal of applied mathematics & informatics
• /
• 제27권5_6호
• /
• pp.1429-1433
• /
• 2009

The likelihood distance for the joint distribution of two multivariate normal distributions with common covariance matrix is explicitly derived. It is useful for identifying outliers which do not follow the joint multivariate normal distribution with common covariance matrix. The likelihood distance derived here is a good ground for the use of a generalized Wilks statistic in influence analysis of two multivariate normal data.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1446-1452
• /
• 2014

Existing LDA uses the transform matrix that maximizes distance between classes. So we have to convert from an image to one-dimensional vector as training vector. However, in 2D-LDA, we can directly use two-dimensional image itself as training matrix, so that the classification performance can be enhanced about 20% comparing LDA, since the training matrix preserves the spatial information of two-dimensional image. However 2D-LDA uses same calculation schema for transformation matrix and therefore both LDA and 2D-LDA has the heteroscedastic problem which means that the class classification cannot obtain beneficial information of spatial distances of class clusters since LDA uses only data correlation-based covariance matrix of the training data without any reference to distances between classes. In this paper, we propose a new method to apply training matrix of 2D-LDA by using WPS-LDA idea that calculates the reciprocal of distance between classes and apply this weight to between class scatter matrix. The experimental result shows that the discriminating power of proposed 2D-LDA with weighted between class scatter has been improved up to 2% than original 2D-LDA. This method has good performance, especially when the distance between two classes is very close and the dimension of projection axis is low.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.217-218
• /
• 2002

An integrated adhesive wear model was proposed to determine the transient wear and steady-state wear of aluminium alloy matrix composites. The transient wear volume was described by an exponential equation, while the steady-state wear was governed by a revised Archard equation, in which both the transient wear volume and transient sliding distance were excluded. A mathematical method was developed to determine both the transient distance and the net steady-state wear coefficient. Experimental wear tests were carried out on three types of commercial A6061 aluminum alloy matrix composites reinforced with 10%, 15% and 20% alumina particles. More accurate wear coefficient values were obtained with the proposed model. The average standard wear coefficient, as determined by the original Archard equation, was found to be about 51% higher.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (B)
• /
• pp.748-750
• /
• 2005

Isomap [1] is a manifold learning algorithm, which extends classical multidimensional scaling (MDS) by considering approximate geodesic distance instead of Euclidean distance. The approximate geodesic distance matrix can be interpreted as a kernel matrix, which implies that Isomap can be solved by a kernel eigenvalue problem. However, the geodesic distance kernel matrix is not guaranteed to be positive semidefinite. In this paper we employ a constant-adding method, which leads to the Mercer kernel-based Isomap algorithm. Numerical experimental results with noisy 'Swiss roll' data, confirm the validity and high performance of our kernel Isomap algorithm.

• 한국멀티미디어학회논문지
• /
• 제11권9호
• /
• pp.1302-1309
• /
• 2008

K-means나 퍼지 군집화와 같은 전통적인 군집화 기법들이 원형(prototype)을 기반으로 하고 볼록한 형태의 집단들에 적합한 반면, 스펙트럼 군집화(spectral clustering)는 국부적인 유사성을 기반으로 전역적인 집단을 찾아내는 기법으로 오목한 형태의 집단들에도 적용할 수 있어 커널을 기반으로 하는 SVM과 더불어 각광을 받고 있다. 하지만 SVM이 그러하듯이 스펙트럼 군집화에서도 커널의 폭은 성능에 지대한 영향을 끼치는 요인으로, 이를 결정하기 위한 다양한 방법이 시도되었지만 여전히 휴리스틱에 의존하는 실정이다. 이 논문에서는 유사도 행렬이 보다 명백한 블록 대각 형태를 가지도록 하기 위해 국부적인 커널의 폭을 거리 히스토그램을 바탕으로 적응적으로 결정하는 방법을 제시한다. 제안한 방법은 스펙트럼 군집화에 사용되는 유사도 행렬(affinity matrix)이 블록 형태의 대각 행렬을 이룰 때 이상적인 결과를 낸다는 사실에 기반하고 있으며, 이를 위해서 전통적인 유클리디안 거리와 무작위 행보 거리(random walk distance)를 함께 사용한다. 제안한 방법은 기존의 방법들에서 사용하는 유사도 행렬에 비해 명확한 블록 대각 행렬을 나타내고 있음을 실험 결과를 통해 확인할 수 있다.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1808-1813
• /
• 2018

I develop a transfer matrix algorithm for computing the geometric quantities of a square lattice polymer with nearest-neighbor interactions. The radius of gyration, the end-to-end distance, and the monomer-to-end distance were computed as functions of the temperature. The computation time scales as ${\lesssim}1.8^N$ with a chain length N, in contrast to the explicit enumeration where the scaling is ${\sim}2.7^N$. Various techniques for reducing memory requirements are implemented.

• Journal of the Korean Data and Information Science Society
• /
• 제20권6호
• /
• pp.1207-1212
• /
• 2009

Basic objective in cluster analysis is to discover natural groupings of items or variables. In general, clustering is conducted based on some similarity (or dissimilarity) matrix or the original input text data. Various measures of similarities (or dissimilarities) between objects (or variables) are developed. We introduce a real application problem of clustering procedure in SPSS when the distance matrix of the objects (or variables) is only given as an input data. It will be very helpful for the cluster analysis of huge data set which leads the size of the proximity matrix greater than 1000, particularly. Syntax command for matrix input data in SPSS for clustering is given with numerical examples.