• 한국추진공학회지
• /
• 제4권4호
• /
• pp.9-17
• /
• 2000

준안정상인 $\beta$형 HNIW의 용해와 안정상인 $\varepsilon$형 HNIW의 성장 특성을 고려한 모델식을 물질수지와 한께 계산하는 방법으로 결정성장 속도와 용해 속도를 계산하였다. 제시된 모델은 용액을 매체로 하여 진행되는 $\beta$$\longrightarrow$$\varepsilon$전이 현상에 대한 속도론적 데이터를 모사 하는데 유용하였다. 2 단 모델을 이용한 유효 인수로부터, 격정성장 과정에서 표면 축적 단계의 영향은 작으며, 확산 의존성은 ethyl acetate와 chloroform의 혼합 용매 중 chloroform의 함량이 증가함에 따라 감소함을 보였다. 이들 속도론 적 계수들을 이용한 수치모사를 통하여 $\varepsilon$-HNIW의 입자 크기를 예측하는 것이 가능하였다.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.251-255
• /
• 2014

In this study, we optimized dissolution the dissolution conditions of porous amorphous powder to have high specific surface area. Porous metallic glass(MG) granules were fabricated by selective phase dissolution, in which brass is removed from a composite powder consisting of MG and 40 vol.% brass. Dissolution was achieved through various concentrations of $H_2SO_4$ and $HNO_3$, with $HNO_3$ proving to have the faster reaction kinetics. Porous powders were analyzed by differential scanning calorimetry to observe crystallization behavior. The Microstructure of milled powder and dissolved powder was analyzed by scanning electron microscope. To check for residual in the dissolved powder after dissolution, energy dispersive X-ray spectroscory and elemental mapping was conducted. It was confirmed that the MG/brass composite powder dissolved in 10% $HNO_3$ produced a porous MG granule with a relatively high specific surface area of $19.60m^2/g$. This proved to be the optimum dissolution condition in which both a porous internal granule structure and amorphous phase were maintained. Consequently, porous MG granules were effectively fabricated and applications of such structures can be expanded.

• 자원환경지질
• /
• 제26권3호
• /
• pp.421-429
• /
• 1993

Dissolution reactions of chemical grade zinc sulfide and natural sphalerite were studied in ferric chloride solution as an oxidant. To enhance the leaching reaction, ultrasonic technique was employed in this investigation. For the reaction with pure zinc sulfide, chemical reaction was the rate limiting step in the range of low conversion irrespective of applying ultrasonic wave. And the diffusion through liquid film instead of diffusion through product layer of free sulfur was the rate determining step because ultrasonic vibration removes the product from reaction zone. In the case of sphalerite with the ultrasonic vibrator, it was found that inert mineral layer diffusion was the rate determining step, in which the elemental sulfurs formed were removed by the ultrasonic action. Experimental results showed that the ultrasonic technique proved to be the methods which can significants improve the leaching performance.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.161-166
• /
• 2002

Bioremediation of trace metals in groundwater may require the manipulation of redox conditions via the injection of a carbon source. To simulate the numerous biogeochemical processes that will occur during the bioremediation of trace-metal-contaminated aquifers, a reactive transport model has been developed. The model consists of a set of coupled mass balance equations, accounting for advection, hydrodynamic dispersion, and a kinetic formulation of the biological or chemical transformations affecting an organic substrate, electron acceptors, corresponding reduced species, and trace metal contaminants of interest, uranium in this study. The redox conditions of the domain are characterized by estimating the pE, based on the concentrations of the dominant terminal electron acceptor and its corresponding reduced specie. This pE and the concentrations of relevant species we then used by a modified version of MINTEQA2, which calculates the speciation/sorption and precipitation/dissolution of the species of interest under equilibrium conditions. Kinetics of precipitation/dissolution processes are described as being proportional to the difference between the actual and calculated equilibrium concentration.

• 자원환경지질
• /
• 제32권1호
• /
• pp.53-62
• /
• 1999

The possibility of heavy metal pollution by contaminated roadside soils was studied under controlled conditions. The soil samples from roadside and those from a retention pond consisting of settling particles were characterized by the XRD analyses and the sequential extraction experiments. Characterization by sequential extraction, for roadside soil indicates elevate total concentrations of heavy metals. The leaching behavior of the samples under different pH and time conditions were also studied. Differences between both types of samples result mainly from the buffering effect of carbonates, present in roadside soils and lacking from settling particles. Acid leaching of the settling particles is equivalent to the sum of FI+FII+FIII, while the amounts leached from roadside soil are lower probably from kinetic reasons. The buffering effects of carbonates were found to greatly delay the onset of the leaching reactions and the extent of dissolution in most metals except for Ca and Mn. The study of leaching kinetics at pH of 6.5 and 5 showed that Cd and Zn reached the maximum possible concentration within 3 days, while Pb did not show any sign of dissolution at both ph values. The absolute amounts of dissolved Cd and Zn increased by 7 to 9 times by decreasing the pH from 6.5 to 5, indicating slightly acidified rain may result in significant metal dissolution. As deduced from both sequential extraction and leaching experiments, the relative mobility of heavy metals is found to be : Mn=Cd>Zn>>Pb>Fe, in spite of large differences in heavy metal contents and localizations.

• Journal of Pharmaceutical Investigation
• /
• 제30권3호
• /
• pp.207-211
• /
• 2000

The objective of this work is to investigate the effect of molecular weight of poly(ethylene oxide) (PEO) and release medium on the release of nifedipine (NP) from PEO tablets containing NP and to get some mechanistic insights into the release of NP. The tablets containing NP were prepared by direct compression, using a flat-faced punch and die. The molecular weights of PEOs used were 200K, 900K, 2000K and 7,000K. The release kinetics were studied for 24 hours in aqueous ethanol solution, using a dissolution tester at $36.5^{\circ}C$ and 100 rpm. Drug release rate increased, as the concentration of ethanol in the dissolution medium increased, due to the increased solubility of NP. As the molecular weight of PEO increased, release rate decreased, due to the slower swelling and dissolution of PEO. The power values obtained by fitting data to the power law expression $(M_t/M_{\infty}=kt^n)$ indicated that, at low ethanol concentration, the release of NP is governed by anomalous diffusion. However, as the ethanol concentration increases, diffusional release becomes to prevail over anomalous or zero-order release. Overall, these results provided some insights into the release of NP from PEO tablet.

• 약학회지
• /
• 제37권4호
• /
• pp.370-382
• /
• 1993

In order for formulation of rectal containing OMZ, the OMZ suppositories were prepared using water-soluble base, PEG 4000 base and oil-soluble base, Witepsol H 15. Chemical stability of OMZ in suppositories was increased when Witepsol H 15 was used as a suppository base and arginine was added as a stabilizer. The decomposition of OMZ in suppository bases followed the first-order kinetics and their rate constants were 0.11 day $^{1}(t_{1/2}$=/6.25 days) for Witepsol H 15 suppository and 0.48 day $^{1}(t_{1/2}$=/1.43 days) for PEG 4000 suppository, respectively. On the other hand, the decomposition rate constants of Witepsol suppository and PEG suppository stabilized with arginine were 3.89$\times$10$^{-3}$(t$_{1/2}$=171.1 days) and 8.76$\times$10$^{-3}$ day $^{1}(t_{1/2}=79.9 days), respectively. Shelf-lives of the Witepsol and PEG suppositories stabilized with arginine were t$_{90%}$=291.8 days and t$_{90%}$=282.1 days at $35^{\circ}C$ and 75% RH, respectively. The dissolution test of OMZ suppositories was performed by rotating dialysis cell(RDC) method and the release rate constant was calculated by the simplified Higuchi's equation, Q'=K' t$^{1/2}$. Dissolution of OMZ from suppositories was augmented as arginine was added, particle size of OMZ was reduced and a suitable surfactant such as SLS was added. RDC method was more appropriate and available than Paddle method to evaluate the dissolution rate of lipophilic-base suppositoies. Arginine was found to be a very useful exipient for the enhancement of stability and dissolution of OMZ in suppositories.

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.568-571
• /
• 2001

The purpose of this work was to study the effect of storage time and temperature on the in vitro release kinetics of a commercial sustained-release dosage form of theophylline, at different pHs of the dissolution medium. The formulation was stored at $35^{\circ}C$ for 16 months and at $45^{\circ}C$ for 8 months, with a relative humidity of 60%. The in vitro release tests were performed at pHs 2, 4, 6 and 7.4. The mean values of the transport coefficient n, were close to 0.5 in all the conditions tested, which indicates that the transport system is not modified after storage of the formulation at $35^{\circ}C$ and $45^{\circ}C$. The mean values of the dissolution rate constant ranged from 0.036 to 0.043 $min^{-n}$, under all the conditions tested. Significant differences (${\alpha}=0.05$) were found between pHs 2, 4 and 6, 7.4 for all the model-independent parameters studied. When the formulation was kept at $35^{\circ}C$ for 16 months, the mean percentage of drug dissolved at 8 hours was 25.61% (pHs 2, 4) and, 36.12% (pHs 6, 7.4), representing a 26% and 24% reduction, respectively. Simitar results were obtained after storing the formulation at $45^{\circ}C$ for 8 months, corresponding to 33.3% (pHs 2, 4) and, 22.5% (pHs 6, 7.4) diminution, respectively. The values of the similarity factory $f_2$, obtained were lower than 50, which indicates the lack of similarity among the dissolution profiles, after storing the formulation under the experimental Conditions tested.

• Applied Microscopy
• /
• 제46권3호
• /
• pp.160-163
• /
• 2016

Effect of dealloying condition on the formation of nanoporous structure in melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy has been investigated in the present study. In as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy spinodal decomposition occurs in the undercooled liquid during cooling, leading to amorphous phase separation. By immersing the as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy in 5 wt% HCl solution, Al-rich amorphous region is leached out, resulting in an interconnected nano-porous $GeO_x$ with an amorphous structure. The dealloying temperature strongly affects the whole dealloying process. At higher dealloying temperature, dissolution kinetics and surface diffusion/agglomeration rate become higher, resulting in the accelerated dealloying kinetics, i.e., larger dealloying depth and coarser pore-ligament structure.

• Nuclear Engineering and Technology
• /
• 제4권4호
• /
• pp.322-326
• /
• 1972

상온에서 (NH$_4$)$_2$CrO$_4$를 원자로에 조사하고, 조사된 후 상온에서 보관된 시간과 $^{51}$ Cr의 잔류값을 반응속도론적으로 연구하였다. 또한 원자로 조사시간 변화에 따르는 $^{51}$ Cr의 잔류값을 반응속도론적으로 고찰하였으며 일차반응으로 표시 될 수 있었다.