• Journal of Microbiology and Biotechnology
• /
• v.28 no.12
• /
• pp.2113-2120
• /
• 2018

Cross-reactive material 197 ($CRM_{197}$) is a non-toxic mutant of diphtheria toxin containing a single amino acid substitution of glycine 52 with glutamic acid. $CRM_{197}$ has been used as a carrier protein for poorly immunogenic polysaccharide antigens to improve immune responses. In this study, to develop a sandwich ELISA that can detect $CRM_{197}$ and $CRM_{197}$ conjugate vaccines, we generated a human anti-$CRM_{197}$ monoclonal antibody (mAb) 3F9 using a phage-displayed human synthetic Fab library and produced mouse anti-$CRM_{197}$ polyclonal antibody. The affinity ($K_D$) of 3F9 for $CRM_{197}$ was 3.55 nM, based on Bio-Layer interferometry, and it bound specifically to the B fragment of $CRM_{197}$. The sandwich ELISA was carried out using 3F9 as a capture antibody and the mouse polyclonal antibody as a detection antibody. The detection limit of the sandwich ELISA was <1 ng/ml $CRM_{197}$. In addition, the 3F9 antibody bound to the $CRM_{197}$-polysaccharide conjugates tested in a dose-dependent manner. This ELISA system will be useful for the quantification and characterization of $CRM_{197}$ and $CRM_{197}$ conjugate vaccines. To our knowledge, this study is the first to generate a human monoclonal antibody against $CRM_{197}$ and to develop a sandwich ELISA for $CRM_{197}$ conjugate vaccines.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.5
• /
• pp.29-41
• /
• 2022

Alien species cause problems in various ecosystems, reduce biodiversity, and destroy ecosystems. Due to these problems, the problem of a management plan is increasing, and it is difficult to accurately identify each individual and calculate the number of individuals, especially when researching alien turtle species such as GPS and PIT based on capture. this study intends to conduct an individual recognition study using a UAV. Recently, UAVs can take various sensor-based photos and easily obtain high-definition image data at low altitudes. Therefore, based on previous studies, this study investigated five variables to be considered in UAV flights and produced a test paper using them. OCR was used to monitor the displayed turtles using the manufactured test paper, and this confirmed the recognition rate. As a result, the use of yellow numbers showed the highest recognition rate. In addition, the minimum threat distance was confirmed to be 3 to 6m, and turtles with a shell size of 6 to 8cm were also identified during the flight. Therefore, we tried to propose an object recognition methodology for turtle display text using OCR, and it is expected to be used as a new turtle monitoring technique.

• Membrane Journal
• /
• v.33 no.5
• /
• pp.240-247
• /
• 2023

Even among gas separation methods, CO₂ capture and separation via membranes is an ever-growing field, with many different membrane compositions continually being developed. Ionic liquid (IL) based composite membranes show excellent performance values in separating CO₂. Similarly, various copolymer/IL composite membranes also display improved performance. The addition of fillers such as graphene oxide to these copolymer/IL composite membranes shows a further enhanced version of these fillers, most likely due to the strong interactions that occur between ILs and organic fillers, which consequently improves factors such as the affinity, selectivity, and adsorption of CO₂. Copolymer/IL composite membranes utilizing a metal-organic framework (MOF) showed improved CO₂ permeability. This review discusses the study of various combinations of ionic liquid and copolymer composite membranes for carbon dioxide separation.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.616-631
• /
• 2007

Residential differentiation is an academic theme which has been given enormous attention in urban studies. This is due to the fact that residential segregation can be seen as one of the best indicators for socio-spatial dialectics occurring on urban space. Measuring how one population group is differentiated from the other group in terms of residential space has been a focal point in the residential segregation studies. The index of dissimilarity has been the most extensively used one. Despite its popularity, however, it has been accused of inability to capture the degree of spatial clustering that unevenly distributed population groups usually display. Further, the spatial indices of segregation which have been introduced to edify the problems of the index of dissimilarity also have some drawbacks: significance testing methods have never been provided; recent advances in spatial statistics have not been extensively exploited. Thus, the main purpose of the research is to devise a spatial separation measure which is expected to gauge not only how unevenly two population groups are distributed over urban space, but also how much the uneven distributions are spatially clustered (spatial dependence). The main results are as follows. First, a new measure is developed by integrating spatial association measures and spatial chi-square statistics. A significance testing method based on the generalized randomization test is also provided. Second, a case study of residential differentiation among groups by educational attainment in major Korean metropolitan cities clearly shows the applicability of the analytical framework presented in the paper.

• Korean Journal of Cognitive Science
• /
• v.24 no.4
• /
• pp.365-391
• /
• 2013

Negative repetition effect (NRE) refers to the phenomenon that the accuracy of report is impaired when a target was flanked by the same distractor than when by alternative distractor. To probe the nature of NRE, this study introduced attention window(s) indicating the positions where a target might be presented, and non-attention window(s) where a target could not be presented. Attention windows are supposed to help participants detect targets readily. Two among three positions are indicated by attention windows in Exp. 1, and a single large attention window encompassing central two positions among four positions was used in Exp. 2, and either large or small attention window was used depending on the number of target candidates in Exp. 3. In the result of three experiments, NREs were consistently observed when both positions of a target and a distractor were indicated by previous attention windows. However, NREs (including its tendency) and its opposite, PREs were observed when a distractor was presented in the non-attention position, depending on its distance from the target and the size of attention window. It seems that this pattern of repetition effects is hard to be explained by repetition blindness hypothesis (Kanwisher, 1991), positional uncertainty hypothesis (Keren & Boer, 1985), and inhibitory attention capture hypothesis (Kwak et al., 1993). Instead it was proposed that shifting of spatial attention should be considered accordingly with the structure of stimulus display. The promising role of this task was discussed in studying the relation of attention and perception.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.157-164
• /
• 2011

Emotion science is one of the rapidly expanding engineering/scientific disciplines which has a major impact on human society. Such growing interests in emotion science and engineering owe the recent trend that various academic fields are being merged. In this paper we propose the potential importance of the biochip technology in which the human emotion can be precisely measured in real time using body fluids such as blood, saliva and sweat. We firstly and newly name such a biochip an Emotion-On-a-Chip (EOC). EOC consists of biological markers to measure the emotion, electrode to acquire the signal, transducer to transfer the signal and display to show the result. In particular, microfabrication techniques made it possible to construct nano/micron scale sensing parts/chips to accommodate the biological molecules to capture the emotional bio-markers and gave us a new opportunities to investigate the emotion precisely. Future developments in the EOC techniques will be able to help combine the social sciences and natural sciences, and consequently expand the scope of studies.

• Spatial Information Research
• /
• v.1 no.1
• /
• pp.73-87
• /
• 1993

This paper reviews the topic of GIS, the academic setting of GIS, GIS model curricula and the possibility GIS education in Korea. The topics which might be included in a science of geographic information consist of data collection and measurement, data capture, spatial statistics, data modeling and theories of spatial data, data structures, algorithms and processes, display, analytical tools, institutional, managerial and ethical issues. The problems in teaching a course on GIS in higher education are reviewed. Because of their technological, integrative, and rapidly changing nature, GIS pose major challenges to their education system which it is ill equipped to meet. In higher education a number of initiatives have been taken to provide education about and training with, GIS. The possible GIS curricula are suggested. These curricula are divided into 3 major sections, relating GIS context, technical issues and application issues. The prospects of GIS appears lo depend largely upon the future cooperation of academia, government, and industry

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.370-381
• /
• 2002

This study was performed to evaluate the temperature rise on various position of the Buchanan plugger, the peak temperature of plugger's type and the temperature change by its touching time of heat control spling. The heat carrier system 'System B' (Model 1005, Analytic Technologies, USA) and the Buchanan's plug-gers of F, FM, M and ML sizes are used for this study. The temperature was set to 20$0^{\circ}C$ which Dr. Buchanan's "continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. In order to apply heat on the Buchanan's pluggers, the heat control spring was touched for 1, 2, 3, 4 and 5 seconds respectively. The temperature rise on the surface of the pluggers were measured at 0.5 mm intervals from tip to 20 mm length of shank using the infrared thermography (Radiation Thermometer-IR Temper, NEC San-ei Instruments, Ltd, Japan) and TH31-702 Data capture software program (NEC San-ei Instruments, Ltd, Japan). Data were analyzed using a one way ANOVA followed by Duncan's multiple range test and linear regression test. The results as follows. 1. The position at which temperature peaked was approximately at 0.5 mm to 1.5 mm far from the tip of Buchanan's pluggers (p<0.001). The temperature was constantly decreased toward the shank from the tip of it (p<0.001). 2. When the pluggerss were heated over 5 seconds, the peak temperature by time of measurement revealed from 253.3$\pm$10.5$^{\circ}C$ to 192.1$\pm$3.3$^{\circ}C$ in a touch for 1 sec, from 218.6$\pm$5.$0^{\circ}C$ to 179.5$\pm$4.2$^{\circ}C$ in a touch for 2 sec, from 197.5$\pm$3.$0^{\circ}C$ to 167.5$\pm$3.7$^{\circ}C$ in a touch for 3 sec, from 183.7$\pm$2.5$^{\circ}C$ to 159.8$\pm$3.6$^{\circ}C$ in a touch for 4 sec and from 164.9$\pm$2.$0^{\circ}C$ to 158.4$\pm$1.8$^{\circ}C$ in a touch for 5 sec. A touch for 1 sec showed the highest peak temperature, followed by, in descending order, 2 sec, 3 sec, 4 sec. A touch for 5 sec showed the lowest peak temperature (p<0.001). 3. A each type of pluggers showed different peak temperatures. The peak temperature was the highest in F type and followed by, in descending order, M type, ML type. FM type revealed the lowest peak temperature (p<0.001). The results of this study indicated that pluggers are designed to concentrate heat at around its tip, its actual temperature does not correlate well with the temperature which Buchanan's "continuous wave of condensation" technique recommend, and finally a quick touch of heat control spring for 1sec reveals the highest temperature rise.