• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1354-1356
• /
• 2009

In this paper, we explained characteristics of integral imaging microscope using point light source. To display the bio-medical information, which is captured as a form of the elemental images, using autostereoscopic displays, the characteristics analysis of three-dimensional information is required. For integral imaging microscope using point light source array, the elemental image capturing configuration has to satisfy a specific condition. We explain the condition to capture the elemental images and show the experimental results.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.172-178
• /
• 2023

With the expansion of metaverse content and hardware platforms, various interactions in the virtual world have been built, raising expectations for an increase in immersion which is a major element of the metaverse. However, among hardware platforms that increase virtual immersion elements, the typical HMD platform can be a barrier to new user inflows due to its high cost. Thus, this paper focused on improving virtual-to-real interactions by extracting motion data using relatively inexpensive webcam equipment in PC environments, utilizing Unity game engines, Photon unity network, multi-platform implementations, and Barracuda neural network inference libraries.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.54-59
• /
• 2001

The role of $NH_3$ for vertical alignment of CNTs was investigated. The direct cause of the alignment was a dense distribution of catalytic metal particles, but which was kept catalytically active during the growth process by $NH_3$. This allows a dense nucleation of the CNTs, and consequently, assists vertical alignment through entanglement and mechanical leaning among the tubes. The CNTs grow in a base growth mode. Several evidences were presented including a direct cross-sectional TEM observation. Since Ni is consumed both by silicide reaction and by capture in the growing tube, the growth stops when Ni is completely depleted. This occurs faster for smaller particles, and thus a longer growth results in thin bottom with poor adhesion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• 한국컴퓨터정보학회논문지
• /
• 제21권10호
• /
• pp.11-19
• /
• 2016

The size of a display is large, The form becoming various of that do not apply to previous methods of gaze tracking and if setup gaze-track-camera above display, can solve the problem of size or height of display. However, This method can not use of infrared illumination information of reflected cornea using previous methods. In this paper, Robust pupil detecting method for eye's occlusion, corner point of inner eye and center of pupil, and using the face pose information proposes a method for calculating the simply position of the gaze. In the proposed method, capture the frame for gaze tracking that according to position of person transform camera mode of wide or narrow angle. If detect the face exist in field of view(FOV) in wide mode of camera, transform narrow mode of camera calculating position of face. The frame captured in narrow mode of camera include gaze direction information of person in long distance. The method for calculating the gaze direction consist of face pose estimation and gaze direction calculating step. Face pose estimation is estimated by mapping between feature point of detected face and 3D model. To calculate gaze direction the first, perform ellipse detect using splitting from iris edge information of pupil and if occlusion of pupil, estimate position of pupil with deformable template. Then using center of pupil and corner point of inner eye, face pose information calculate gaze position at display. In the experiment, proposed gaze tracking algorithm in this paper solve the constraints that form of a display, to calculate effectively gaze direction of person in the long distance using single camera, demonstrate in experiments by distance.

• 한국유체기계학회 논문집
• /
• 제12권4호
• /
• pp.30-36
• /
• 2009

Recently, there has been growing interest in the oxyfuel combustion cycle since it enables high-purity $CO_2 capture with high$ efficiency. However, the oxyfuel combustion cycle has some important issues regarding to its performance such as the requirement of water recirculation to decrease a turbine inlet temperature and proper combustion to enhance cycle efficiency. Also, Some of water vapour remain not condensed at condenser outlet because cycle working fluid contains non-condensable gas, i.e., $CO_2$. The purpose of the present study is to analyze performance characteristics of the oxyfuel combustion cycle with different turbine inlet temperatures, combustion pressures and condenser pressure. It is expected that increasing the turbine inlet temperature improves cycle efficiency, on the other hand, the combustion pressure has specific value to display highest cycle efficiency. And increasing condensing pressure improves water vapour condensing rate.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.83-90
• /
• 2014

Using a ray tracing simulation, we have investigated the moir${\acute{e}}$ and starburst phenomena of touch screen panels (TSPs) based on opaque metallic grids (square, hexagonal, and random grids). It is demonstrated that employing a random metal mesh is the most effective way to suppress the moir${\acute{e}}$ and starburst phenomena at the same time. At high crossing angles between metal mesh of TSPs and black matrix (BM) of displays, however, a random metal mesh brings in stronger moir${\acute{e}}$ phenomenon than a square metal mesh due to point defects. Though the square metal mesh suppresses the moir${\acute{e}}$ effect substantially at high crossing angles, yet it results in the strongest starburst patterns. We have also provided the simulation scheme that can capture the moir${\acute{e}}$ and starburst patterns observed experimentally and useful design guidelines for metal grids.

• 한국컴퓨터그래픽스학회논문지
• /
• 제17권1호
• /
• pp.39-44
• /
• 2011

영상이나 동영상을 저장하거나 전송할 때 저장 공간의 크기나 네트워크 대역폭을 고려하여 고해상도 윈본 영상을 축소하여 저장, 전송하고 최종적으로 영상을 디스플레이 하는 과정에서 영상을 확대하는 경우가 실제 응용에서 빈번히 나타난다. 기존 연구들에서는 이런 경우 확대 영상의 화질을 개선하기 위해 영상 확대 과정을 개선하기 위한 연구가 많이 진행되었다. 본 논문에서는 이런 상황에서는 고해상도 원본 영상이 존재한다는 점에 착안하여 영상 확대 과정 대신 영상을 축소하는 과정을 개선함으로써 최종 확대 영상의 화질을 개선하기 위한 방법을 제안한다. 특히 실제 하드웨어나 소프트웨어에서 널리 적용되는 선행 보간법, 삼차 보간법 등에서 확대 영상의 화소가 작은 영상의 화소값들의 선형 조합으로 나타난다는 점에 착안하여 영상 확대 과정을 선형 변환으로 모델링하고 최적 축소 영상을 만틀기 위한 역변환을 얻는 방법을 제안한다. 또한 역변환 과정의 계산량을 줄이기 위해 역변환과정을 간단한 필터 커널로 근사하는 방법을 제안한다. 결과적으로 본 논문에서 제안하는 방법으로 축소한 영상을 확대 복원하였을 때 기존에 사용되던 방법에 비해 상당한 화질 개선 효과가 있는 것을 실험적으로 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.49-62
• /
• 2015

본 연구에서는 건축정보모델링(Building Information Modeling, BIM) 데이터와 증강현실기술의 결합을 통한 기본적인 형태의 건축설계지원도구의 개발 방법을 제안한다. 본 연구에서 제안하는 시스템은 투명형 디스플레이, Mock-up 모델 및 디지털 건축 모델을 적극적으로 활용하여 다자간 디자인 검증 협업작업을 진행할 수 있는 시스템으로서, 투명형 디스플레이를 증강현실에 이용하기 위한 하드웨어 구성 및 고유한 시스템 프레임의 형태를 제안하고, 사용자의 시점에 맞는 증상현실 영상을 제시하기 위한 캡쳐 이미지의 배경 제거 및 관찰자 시점의 보정에 대해서 설명한다. 그리고 건축분야에서 많이 활용되고 있는 BIM으로 작성된 디지털 건축 모델의 증강현실 활용 가능성에 대하여 검토하였다. 또한 본 논문에서 제작한 2인용의 건축디자인 협업 시스템은 보다 많은 사용자가 작업을 진행할 수 있는 시스템으로 확장이 가능하며, 확장된 디자인평가시스템을 구성하기 위한 설계안에 대해서 제안한다. 이와 같은 증강현실기술을 이용한 건축설계지원도구의 개발을 통해 건축디자인 분야에서 실물 모델 및 BIM 저작툴로 작성된 디지털 모델을 적극적으로 활용하여, 보다 효율적이고 경제적인 건축디자인 검증 작업이 가능할 것으로 생각된다.

• 마케팅과학연구
• /
• 제10권
• /
• pp.187-212
• /
• 2002

Vietnams urban middle class is strongly value oriented in its shopping behavior. They want fairly good quality and service, but they also factor price into their considerations. In terms of retail patronage, they demand convenience, good service, attractive display, and especially want extensive choice. Brands must be present in multiple types of outlet, or fragile brand loyalties can be broken. Mini supermarkets have become an important part of the retail scene in the past decade, and have successfully introduced the supermarket concept to Vietnam. Many consumers are integrating mini supermarkets into their regular shopping, and are willing to pay the higher prices to gain the benefits of such shopping. However, the mini supermarkets do not adequately meet some of the things they expect from supermarkets. Large supermarkets are just entering the market, and are likely to capture much of the current mini supermarket customer base.