• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.236-240
• /
• 2005

The commercialization of an active matrix e-reader display using E Ink microencapsulated electrophoretic (MEP) ink marked a big step towards comfortable reading over an extended period of time in an electronic book, as the high resolution display, jointly realized by Philips, E Ink and Toppan, has a true paper-like look and feel. Alternative electrophoretic material systems are being developed by SiPix and Bridgestone and progress has been made in the past two years. In this paper, electrophoretic material systems are briefly reviewed, after which the perspectives and challenges of electrophoretic displays are addressed and methods for generating gray tones are presented and discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.361-363
• /
• 2005

The transient current of STN-LCD cells was measured and simulated to characterize ionic behavior in LCD cells. An experiment was performed to investigate the contribution of LC material and PI trapping effect to mobile ions in the LC layer. We observed that most of ions are trapped on the PI surface rather than stay in the LC layer in case of normal STN-LCD, and PI surface favors larger ions in general. A linear correlation of ion density and $V_50$ shift of the Transmission-Voltage (TV) curve between 30Hz and 1kHz at typical ion mobility was found.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.32-35
• /
• 2002

In this work, we test electrode material of TFD (Thin Film Diode) device subject to flexible substrate. Al, that is ductile metal, was proper for flexible electrode to fabricate flexible display. The fabricated devices had symmetric electrode structure on both sides of insulation layer. The electrode was made of ductile Al so as to reduce the mismatch of properties between the electrode and substrate. The TFD device was successfully fabricated applying our own etch-free process. Electrical properties were improved by post-annealing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.522-525
• /
• 2002

본 논문에서는 고휘도 LCD 백라이트 유닛에 사용되는 직하방식 백라이트 제조 방법을 이용하여 저전력, 고휘도, 경박 단소의 광고용 사인보드를 설계 제작하였다. 광학 시뮬레이션을 이용하여 램프의 배치 등 을 설계하였으며. 최고 16개의 냉음극관 램프를 구동할 수 있는 인버터를 설계 제작하였다. 크기 $500mm{\times}400mm$의 광고판의 경우 두께는 35mm 이었으며 휘도는 15,000lux이었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.173-177
• /
• 2007

Electro-wetting display (EWD) that displays information by controling movement of fluid is one of the strong candidates for electronic paper display (EPD). In EWD cell. the movement of oil which locates between hydrophobic insulation layer and deionized water is rather random, which makes it difficult to realize gray scale, fast response time, and good color characteristics. In this paper, we investigated how to control the oil movement in specific one direction by surface treatment and pattered electrodes. From these experiments, we could control oil movement in a desired direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.85-86
• /
• 2008

We have developed charged particle type display using opposite-charged two particles. We fabricated the charged particle type display to be controlled the addressing layers by putting voltage. To get the effect of number of layers, we measured driving voltage, reflectivity, viewing angle, and color characteristics, for 1~2 layer. Reflectivity was different according to the number of layers and wavelength of yellow particles is alike to that.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.35-35
• /
• 2007

The roll printing technique is the updated technology which will substitute a existing lithography technique for a field of the display such as LCD, PDP, OLED and FED etc. Currently, the patent trend analysis about research and development of the different enterprises are demanded, because it is forecast that the dominion of display market will be exchanged by research and development result of roll-printing technique. In this presentation, it is analyzed on patent trends applied the roll printing technique for a field of the display such as LCD, PDP, OLED and FED etc in Korea and Japan by the various methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.497-499
• /
• 2005

A portable terminal assistant market grows rapidly every year and it requires many change in research on display devices. Among many newly developing methods, OLED(Organic Light Emitting Diode) is considered an advanced flat display device because its excellent characteristics, including high speed response, full color performance, low power consumption and flux of panel. However changes in the market of display shows that the market will require 3-dimensional images, but it is hard for existing 2-dimensional displays to make 3-dimensional images. Therefore we will try to find various methods such as holograms. In this paper, we will show existing flat displays can make 3-dimensional images by applying Lenticular Screen printing techniques on the organic semiconductor display device.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2018

General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.763-768
• /
• 2018

In this study, glass fibers are fabricated via a continuous spinning process using manganese slag, steel slag, and silica stone. To fabricate the glass fibers, raw materials are put into an alumina crucible, melted at $1550^{\circ}C$ for 2 hrs, and then annealed at $600^{\circ}C$ for 2 hrs. We obtain a black colored glass. We identify the non-crystalline nature of the glass using an XRD(x-ray diffractometer) graph. An adaptable temperature for spinning of the bulk marble glass is characterized using a high temperature viscometer. Spinning is carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1109^{\circ}C$ to $1166^{\circ}C$, while the winder speed is in the range of 100rpm to 250rpm. We investigate the various properties of glass fibers. The average diameters of the glass fibers are measured by optical microscope and FE-SEM. The average diameter of the glass fibers is $73{\mu}m$ at 100rpm, $65{\mu}m$ at 150rpm, $55{\mu}m$ at 200rpm, and $45{\mu}m$ at 250rpm. The mechanical properties of the fibers are confirmed using a UTM(Universal materials testing machine). The average tensile strength of the glass fibers is 21MPa at 100rpm, 31MPa at 150rpm, 34MPa at 200rpm, and 45MPa at 250rpm.