• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.1-6
• /
• 2010

We can see the motion blur phenomenon on theedge of the moving picture when it moves in the LCDs. To reduce this phenomenon, we suggested a new over-deriving method, implemented on the board XUP Virtex-2 Pro Development System by using Virtex-2 Pro XUP XC2VP30 and improved the Motion Blur. In this method, we did not use additional parts except for a SDRAM. Hardware implementation for IP and data interface were handled in software. In this paper, we used the moving bar and the moving video image as a design model. We also showed that the afterimage was reduced and the vivid moving images was displayed. through this method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.129-134
• /
• 2012

We analyzed the movement and response time of charged particles according to particle-inserting methods to understand the variation of quantity of q/m of charged particles, which is a very important factor in electrical and optical characteristics of the charged particle type display, such as lifetime, response time, contrast ratio, reflectivity, etc. For our study we used white and black charged particles of which diameter is $20{\mu}m$, prepared pieces of ITO(indium tin oxide) coated glass substrate, and formed ribs on the glass substrates. The width of a rib is $30{\mu}m$ and the cell size is $220{\mu}m{\times}220{\mu}m$. As the particle-inserting methods, the white and black charged particles were respectively inserted into a front and a rear panel with a very small electric field and also the mixture of the white and black charged particles were inserted into a rear panel. As a result of the driving characteristics of charged particles, the factors about variation of quantity of q/m according to the particle inserting method was experimentally demonstrate, showing very different driving voltage, response time, the particle movement, etc.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.93-99
• /
• 2020

A majority of car crash is affected by careless driving that causes extensive economic and social costs, as well as injuries and fatalities. Thus, the research of precise crash detection systems is very significant issues in automotive safety. A lot of crash detection algorithms have been developed, but the coverage of these algorithms has been limited to few scenarios. Road scenes and situations need to be considered in order to expand the scope of a collision detection system to include a variety of collision modes. The proposed algorithm effectively handles the x, y, and z axes of the sensor, while considering time and suggests a method suitable for various real worlds. To reduce nuisance and false crash detection events, the algorithm discriminated between driving mode and parking mode. The performance of the suggested algorithm was evaluated under various scenarios, and it successfully discriminated between driving and parking modes, and it adjusted crash detection events depending on the real scenario. The proposed algorithm is expected to efficiently manage the space and lifespan of the storage device by allowing the vehicle's black box system to store only necessary crash event's videos.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.17-22
• /
• 2004

We developed a new ANGLED display driving method which used both amplitude and pulse width modulation. For pulse width modulation, we divided a picture frame time into S sub-frames. For amplitude modulation, we used three OLED luminance(or current) levels which were controlled by TFT's gate voltages. By combining these two modulation methods, we obtained 35(=243) grey levels. And we designed a new data electrode driving circuit block with two shift registers without using DAC's. To verify the feasibility, we simulated the key circuit components by HSpice with TFT parameters extracted from current-voltage characteristics of 6${\mu}{\textrm}{m}$ channel length polysilicon TFT's. From the simulation results, we found that 320${\times}$240, dual scan, 243 grey level AMOLED display can be designed with this method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1269-1272
• /
• 2005

We propose a simple and efficient driving algorithm to reduce Dynamic False Contour(DFC) in Plasma Display Panels(PDPs) by using both accumulation and combination of light emission periods. Although the accumulative way of light emission in sustain period is regarded as more effective than combinational way to reduce DFC, it takes much addressing time to express high gray-scale. Therefore, we combine accumulative and combinational light emission methods to reduce DFC. In the proposed method, one TV field (16.7ms) is composed of four combinational subfields for expressing small gray scales and fifteen accumulative subfields for large gray scales. In addition, we use some Graphic Signal Processing(GSP) algorithm to get more natural images by reducing DFC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.714-717
• /
• 2003

We have suggested several plasma display panel (PDP) cell structures for high luminance and low power consumption by our two-and three-dimensional fluid simulation codes. Generally, to improve luminous efficiency and discharge efficiency, it is known that it is lucrative to use long discharge path and to form low electric field. However, the problems are how to implement them effectively in the small PDP cell. Therefore, unlike conventional model, we suggest Front Three Electrodes (FTE) model. In this model, we tried to make long and V-shaped discharge path by geometry changes and driving pulse variations. Consequently, from our simulation results based on the model above, luminous efficiency has improved about 2.6 times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.123-127
• /
• 2004

Cold cathode fluorescent lamp (CCFL) has been used as a light source for direct type backlights for LCD monitors or TV. One inverter for one CCFL was necessary for maintaining the lamp current so that many inverters were used to drive as many CCFLs of direct type backlight for LCD TV. An inverter for driving 16 CCFLs was developed to reduce the backlight cost. The length and diameter of CCFL were 450mm and 4mm, respectively. Backlight including 16 CCFLs for 26" LCD TV was assembled by using one inverter. The uniformities of the assembled backlight operated by the conventional inverter and the newly developed inverter were 75% and 88%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.203-206
• /
• 2002

In this study, a new driving method is suggested to improve the dark room contrast ratio. The principles of the method are that the reset facing discharges occur between scan and address electrodes instead of surface discharge and that the discharge occurs only for the cells that experienced sustain discharge in preceding sub-field after the first sub-field. The dark room contrast ratio is improved more than 7 times compared with the conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.495-498
• /
• 2004

Now days, people live in information age, thus, we are required methods to use and apply information to our lives more effective. There is a lot of research going on weight, size, and power consumption to provide high quality display close to full color. In this paper, I‘ll discuss the methods of precise and the need of improvements of driving circuit, to apply driving circuit to digital circuit of OLED(Organic Light-Emitting Diode), which satisfies all functions mentioned above.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.21-27
• /
• 2015

We propose a fabrication process of a 3-electrode type reflective display and ascertain the realized color panel. The first design is proceeded with basis on Ti electrode for fast panel fabrication, easy align process, and high reflection of a white image. To observe the particle movement at the lower electrodes and optimize the space between electrodes, we design the second patterns, from which we establish a fabrication process with the mixing of electronic ink, loading of this ink, electronic ink assembly, driving, and packaging. After aging process, we ascertain a normally driving panel with black, white, and blue color.