• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.382-388
• /
• 2016

When Flat Panel Display (FPD) is made with backlight module, such as LED TV, it inherently suffers from the non-uniform backlight luminance problem that results in un-even brightness distribution throughout the TV screen. If the luminance of each pixel location of a TV screen as a function of the driving voltage can be measured, it can be used to compensate the non-uniformity of the backlight module. We use a carefully calibrated imaging system to take pictures of a TV screen at different levels of brightness and generate the compensation functions for the driving circuitry to correct the luminance level at each pixel location. Making use of the fact that the luminance of the screen is normally brightest at around the center of the screen and gradually decreases toward the border of the screen, the luminance of the whole TV screen is approximated by a mathematical function of the pixel locations. The parameters of the function are computed in the least square sense by the values of both the pixel luminance sent from the driving circuit and the grayscale value measured from the image taken by the imaging system. To justify the correction system, a simple second order polynomial function is used to approximate the luminance across the screen. When the driving circuit voltage is corrected according to the measured function, the variance of the screen luminance is reduced to one tenth of the one measured from the un-corrected TV screen.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.170-173
• /
• 2003

The driving method is one of the most important factors of PDP, so various driving methods have been developed to improve the duality of PDP Nowadays, most of PDPs apply to ADS (Address and Display period Separated) driving method. In this paper, a new driving method that divides scan lines into multi-Blocks is suggested. The proposed driving method in this paper can drive 14 sub-fields per 1 TV field in SD panel, 16 sub-fields per 1 TV field in HD panel. And sufficient Address margin can be obtained.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.53-68
• /
• 2021

The continuous development of in-vehicle information systems in recent years has dramatically enriched drivers' driving experience while occupying their cognitive resources to varying degrees, causing driving distraction. Under this complex information system, managing the complexity and priority of information and further improvement in driving safety has become a key issue that needs to be urgently solved by the in-vehicle information system. The new interactive methods incorporating the augmented reality (AR) and head-up display (HUD) technologies into in-vehicle information systems are currently receiving widespread attention. This superimposes various onboard information into an actual driving scene, thereby meeting the needs of complex tasks and improving driving safety. Based on the qualitative research methods of surveys and telephone interviews, this study collects the information needs of the target user groups (i.e., beginners and skilled drivers) and constructs a three-mode information database to provide the basis for a customized AR-HUD interface design.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.129-134
• /
• 2016

This paper studies the high frequency PWM (pulse width modulation) driving technique to increase an optical efficiency and to prevent an optical color quenching of blue laser for head up display on vehicles using digital micro mirror device (DMD) panel and yellow phosphor wheel. The proposed approach adaptively drives the current pulse width modulated signals of high optical power of blue laser to increase the lifetime and to decrease the stem temperature of laser. This method stabilizes the temperature of laser according to the driving environment and the forward current capacity. By the proposed method, the brightness of blue laser is improved by about 37% compared to the continuous waveform current driving method.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.7-8
• /
• 2013

본 논문에서는 영전압 스위칭 탭인덕터 부스트 컨버터를 제안한다. 기존 컨버터는 DCM구간에 MOSFET의 Coss과 RC 스너버 및 탭인덕터의 공진에의해 MOSFET 양단에 전압 오실레이션이 발생하면서 턴온 시점에 따라 MOSFET 발열이 결정된다. 그래서 부하 변동과 부품편차와 무관하게 항상 최저전압조건에서 턴온하여 MOSFET의 발열을 저감하는 회로를 제안한다. 본 논문에서는 제안된 부스트 컨버터의 동작원리를 이론적으로 해석하고, 시제품 제작 및 실험을 통해 타당성을 검증한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.855-859
• /
• 2004

The Japanese National Project "Carbon Nanotube FED" is developing a high image-quality and low power-consumption field emission display (FED) by applying carbon nanotube (CNT) to the electron source. A uniform electron source with a flat-film CNTs and fine structure triodes Fir suppressing the deviation of emission is required. For realizing an FED panel, it is also necessary to develop the glass-bulb technologies for vacuum sealing, and display technologies for driving the panel by circuit electronic and for evaluating the picture quality by measuring. By achieving these technologies, an FED compatible with conventional Cathode Ray Tubes (CRTs) will be realized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.69-74
• /
• 2004

System-on-glass technology made with low temperature poly-Si TFT has been rapidly advancing in recent years. We have developed a low-power, narrow edged frame, 1.9inch system-on-glass LCD which fully integrates a 16-bit RGB interface driver and all power circuits required for driving the LCD. In this paper, the latest poly-Si TFT circuit technologies used in the newly developed LCD are discussed. The development trends are also reviewed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.902-905
• /
• 2006

Plasma Display Panels(PDPs) suffer from motion artifacts because of subfield driving method. In this paper, a modified motion compensation method is proposed. We apply the optimized mapping table to the higher subfield group and the fill-up method to the lower subfield group to generate optimum mapping patterns. This method does not concentrate 'on' mappings on higher subfields. Therefore it can possibly become a more robust motion compensation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.194-197
• /
• 2006

One novel electrode-architecture has been adapted to fabricate transparent OTFTs. The device has more than 70% transmittance, yet reminds high performance. Furthermore, we also use transfer line method to prove that the device performance enhancement indeed contributes from the reduction of the contact resistances. It is anticipated that the transparent OTFTs would be very suitable to be the driving circuits for liquid crystal displays (LCDs).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.194-197
• /
• 2003

The actively addressable carbon nanotube (CNT) emitters have been studied for stable and low-voltage driving field emission display (FED). The a-Si TFT and screen-printed CNT emitters were successfully integrated to fabricate the diode type active-matrix cathode and FED panel. Also, we propose a new FED architecture based on the actively controlled triode CNT emitters showing the properties of ideal triode type cathode with electron beam focusing effect.