• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.230-237
• /
• 2024

Dispersion munitions are often equipped with dispersive submunitions used to scatter bombs over a wide area, and one of the types of dispersive submunitions is the Magnus rotor, commonly referred to as a self-rotating flying body. The Magnus rotor is designed to be dispered over a wide area by utilizing the principle of the Magnus effect through self-rotation, and has various trajectories depending on the initial conditions from the mother dispersion munition. In this paper, an index to evaluate the dispersion uniformity of footprint of the dispersive submunition is presented and the dispersion uniformity according to various initial release conditions is evaluated, and it is getting larger with high incidence angle and get max value at certain initial angular velocity.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2482-2486
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1024-1031
• /
• 2000

The plate waves propagating in thin plates have dispersive nature showing the dependence of velocities on the frequency. Wavelet transform (WT) using Gabor function can be used to analyze the dispersive waves in the time-frequency domain, and then to find the arrival time of the waves propagating in the plate. Plate waves in the aluminum plate of 3 mm thickness were identified and generated by pencil lead breaks and the lowest order symmetric ($S_o$) and antisymmetric ($A_o$) modes were analyzed by the WT method. The measured group velocities agreed very well with theoretical predictions in the frequency range of 50-400 kHz. The pencil breaks were also used to simulate acoustic emission sources in the plate, and the source location algorithm using the wavelet transform of dispersive plate waves was found to give accurate results.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.829-835
• /
• 2011

A dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) has been developed as a new approach for the extraction of trace copper in water and beverage samples followed by the determination with flame atomic absorption spectrometry. In the DLLME-SFO, 8-hydroxy quinoline, 1-dodecanol, and methanol were used as chelating agent, extraction solvent and dispersive solvent, respectively. The experimental parameters related to the DLLME-SFO such as the type and volume of the extraction and dispersive solvent, extraction time, sample volume, the concentration of chelating agent and salt addition were investigated and optimized. Under the optimum conditions, the enrichment factor for copper was 122. The method was linear in the range from 0.5 to $300\;ng\;mL^{-1}$ of copper in the samples with a correlation coefficient (r) of 0.9996 and a limit of detection of $0.1\;ng\;mL^{-1}$. The method was applied to the determination of copper in water and beverage samples. The recoveries for the spiked water and beverage samples at the copper concentration levels of 5.0 and $10.0\;ng\;mL^{-1}$ were in the range between 92.0% and 108.0%. The relative standard deviations (RSD) varied from 3.0% to 5.6%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.378-383
• /
• 2004

Orthogonal Frequency Division Multiplexing (OFDM) transmits high-speed data by splitting the transmission bandwidth into a number of subcarriers. The bandwidth of each subcarrier is ensured to be smaller than the coherence bandwidth. This paper presents an OFDM system incorporated with the Carrier Interferometry (CI) codes to improve the performance by enhancing frequency diversity effect. The performances of CI-OFDM with multilevel modulations are investigated in highly dispersive fading channels. For the investigation of performance improvement of CI-OFDM, a simulator has been developed using a well-known SPW simulation platform. The simulation results show that the CI-OFDM provides both performance improvement and robustness against dispersive fading channel behavior. The performance of CI-OFBM with multilevel modulations demonstrates that CI-OFDM outperforms a traditional OFDM system, particularly in highly dispersive channels. With a relatively large delay spread of 151㎱ compared to the guard interval of 800㎱, CI-OFDM provides a BER of 10$^{-3}$ if sufficient signal power is present.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.39-43
• /
• 2006

In this contribution, the achievable performance of orthogonal multicarrier DS-CDMA systems employing synchronous uplink transmissions is investigated. The bit error ratio (BER) performance is analyzed under dispersive Rayleigh multipath fading conditions as a function of the number of users.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.565-568
• /
• 2005

We describe a new scheme of dispersive white-light interferometer that is capable of measuring the thickness profile of thin-film layers, for which not only the top surface height profile but also the film thickness of the target surface should be measured at the same time. The interferometer is found useful particularly for in-situ inspection of micro-engineered surfaces such as liquid crystal displays, which requires for high-speed implementation of 3-D surface metrology.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.315-320
• /
• 1984

The newly discovered minerals found during 30 years have been discovered with election microprobe analysis, and several other new minerals have been described largely on the basis of probe analysis. Widely used types of instrument are the wavelength dispersive spectrometer (WDS) and the energy dispersive Spectrometer (EDS), with emitted X-ray dispersed by a curved crystal that is arranged to satisfy the Bragg equation ($n{\lambda}=2dsin{\theta}$). Atomic Nos of Z 4 to 92 can be analyzed quantitatively if they present in amount exceeding 50~100ppm. The application of the microprobe in mineralogical and geological research is quantitative chemical analysis of grains as small as a few microns in diameter, individual grains in a rock or can be analyzed in thin section and polished section, analysis can be made comparatively short time, methods in non-destructure, to photographical and crystallographical information. This paper was written in order to document data evaluation procedure for quantitative energy dispersive election probe analysis.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.246-250
• /
• 1996

In optical soliton transmission systems with nonlinear dispersive materials, which is utilized for ultra-long and high bit rate transmission, it is shown that the value of initial time difference between adjacent solitons is analyzed for optimum bit rate. The method is inducted by uncorrelation condition with minimum interaction forces in initial covariance coefficient between adjacent solitons. When the initial time difference is 6 times of soliton pulse width by the results, it is shown that the reliability is maintained with more than 90% within transmission length of soliton period. multiplied by 93.