• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.8-12
• /
• 2003

The centrifuge test result on capped sediment was compared to the advection- dispersion equation proposed for one layered to predict contaminant transport parameters. The fitted contaminant transport parameters for the centrifuge test results were one to three orders of magnitude greater than the estimated parameters from the advection-dispersion equation. This indicates that the centrifuge model over estimated the contaminant transport phenomena. Thus, the centrifuge provides a non-conservative approach to modeling contaminant transport. It should be also noted that the advection-dispersion equation used in this study is a one layered model. Two layered modeling approaches are more appropriate for modeling this data since there are two layers with different partitioning coefficients. Further research is required to model the centrifuge test using two-layered advection-dispersion models.

• 응용통계연구
• /
• 제23권3호
• /
• pp.585-594
• /
• 2010

본 연구에서는 제로절단된 이변량 일반화 포아송 분포에서 두 반응변수간 산포모수의 효과에 대하여 연구하였다. 모의실험 결과 두 반응변수가 서로 다른 산포를 갖는 경우 이를 무시하는 이변량 포아송 분포나 이변량 음이항 분포에 의한 모형적합은 효율성이 떨어지는 것으로 나타났다. 아울러 본 연구에서는 이와 같은 상이한 산포의 존재유무에 대한 가설검정에서 스코어 검정을 유도하고 우도비 검정과 효율성을 비교하였다.

• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.577-601
• /
• 2019

The paper investigates the influence of the rheological parameters which characterize the creep time, the long-term values of the mechanical properties of viscoelastic materials and a form of the creep function around the initial state of a deformation of the materials of the hollow bi-layered cylinder on the dispersion of the flexural waves propagated in this cylinder. Constitutive relations for the cylinder's materials are given through the fractional exponential operators by Rabotnov. The dispersive attenuation case is considered and numerical results related to the dispersion curves are presented and discussed for the first and second modes under the first harmonic in the circumferential direction. According to these results, it is established that the viscosity of the materials of the constituents causes a decrease in the flexural wave propagation velocity in the bi-layered cylinder under consideration. At the same time, the character of the influence of the rheological parameters, as well as other problem parameters such as the thickness-radius ratio and the elastic modulus ratio of the layers' materials on the dispersion curves, are established.

• Structural Engineering and Mechanics
• /
• 제55권2호
• /
• pp.335-348
• /
• 2015

The influence of the interface imperfect bonding on the flexural wave dispersion in the bilayered hollow circular cylinder is studied with utilizing three-dimensional linear theory of elastodynamics. The shear-spring type model is used for describing the imperfect bonding on the interface between the layers and the degree of the imperfectness is estimated through the dimensionless shear-spring parameters which enter the mentioned model. The method for finding the analytical expressions for the sought values and dispersion equation are discussed and detailed. Numerical results on the lowest first and second modes are presented and analyzed. These results are obtained for various values of the shear-spring parameters. According to these results, in particular, it is established that as a results of the imperfection of the bonding between the layers the new branches of the dispersion related the first fundamental mode arise and the character of the dispersion curve related to the second mode becomes more complicated.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.258-259
• /
• 2014

파랑과 해저지반의 상호작용을 규명하기 위해서는 우선 해저면의 경계조건을 고려한 새로운 분산관계식의 도입이 필요하다. 본 연구에서는 깊이가 유한한 해저지반의 투수성 및 변위를 고려한 새로운 분산관계식을 유도하였으며, 해저지반의 두께, 탄성계수, 포화도, 투수계수, 간극률 등 다양한 지반상수의 변화에 따른 파랑 감쇠율을 비교 검토하였다.

• 대한지하수환경학회지
• /
• 제2권2호
• /
• pp.49-57
• /
• 1995

지하수에 대한삼중수소농도의 측정치가 발표된 충청남도 청양, 제주도 지역 및 미국 조지아지역에 대해 평균체제시간을 계산하는 지하수연령측정 모델인 PFM, CMM, DBM과 평균체제시간과 분산매개변수를 동시에 계산하는 DNM, DM( $C_{FF}$ )모델을 적용하여 그 결과를 비교하였다. 입력자료인 강우의 삼중수소 농도의 부족한 측정자료를 보완하기 위하여 한국의 포항, 카나다의 오타와지역의 강수자료를 이용하여 입력함수를 작성하였다. 내재적으로 적은 분산을 가정하는 PFM과 DBM모델에 의한 결과는 유사하게 계산되었으며, 동일한 지역에서도 특이하게 높은 농도를 보이는 지점은 CMM에 의한 계산이 되지 않았다. 평균체제시간과 분산매개변수가 동시에 계산된 DNM과 DM( $C_{FF}$ )모델의 결과는 PFM, CMM, DBM의 결과를 이용하여 매개변수값을 한정시켰다. 동일지역에서도 삼중수소농도의 변화가 큰 경우는 각 지점마다 특징적인 지하수유동특성을 보이는 것으로 판단되어, 전 지 역에 걸쳐 동일한 모델을 일률적으로 적용하는 것은 바람직하지 않은 것으로 사료된다.

• 천문학회보
• /
• 제41권1호
• /
• pp.40.2-41
• /
• 2016

To understand the observed kinematics in the narrow-line region (NLR) of type 2 AGNs, we construct a model of 3-D biconical outflow combined with a thin dust plane. The model consists of two identical cones whose apex is located at the nucleus, and the cones are axisymmetric with respect to the bicone axis. After we define the properties of the bicone and the dust plane, we calculate a spatially integrated velocity and velocity dispersion along the line-of-sight using various physical parameters. As we test the effect of model parameters, we find three key parameters determining the integrated kinematics: intrinsic outflow velocity, bicone inclination, and the amount of dust extinction. The velocity dispersion increases as the intrinsic outflow velocity or the bicone inclination increases, while the velocity shift increases as the amount of dust extinction increases. We confirm that the integrated velocity dispersion can be a good indicator of the intrinsic outflow velocity unless dust extinction is not very strong (>~80%), while the effect of dust extinction can be alleviated by combining the integrated velocity and the velocity dispersion. Based on the simulated velocity distributions using the 3-D models, the variety of the observed [O $_{III}$] line profiles of type 2 AGNs can be well reproduced. In addition, we perform Monte Carlo simulations based on the different sets of model parameters. By comparing the model results with the observed [O $_{III}$] kinematics of ~39,000 SDSS type 2 AGNs (Woo et al. 2016), we find that the observed [O $_{III}$] velocity-velocity dispersion distribution is well reproduced by the biconical outflow model, enabling us to constrain the intrinsic physical parameters of outflows.

• 한국광학회지
• /
• 제6권2호
• /
• pp.156-164
• /
• 1995

광섬유의 스칼라 파동방정식을 토대로 임의의 굴절율 분포를 갖는 광섬유의 분산특성을 해석하였다. 스칼라 파동방정식을 해석하기 위해서 2차 보간함수를 사용한 1차원 유한요소법을 적용하였다. DC형 광섬유를 대상으로 하였으며, 총분산을 최소화할 수 있는 굴절율분포를 조사하였다. $\lambda=1.3, 1.55{\mu}m$두 파장에서 동시에 분산이 거의 0이 되는 설계치를 찾을 수 있었다. 그리고 $\lambda=1.4~1.7{\mu}m$에 걸쳐서 1.0ps/km.nm 이하의 평탄분산특성을 갖고 $\lambda=1.55{\mu}m$에서 0.65ps/km.nm의 분선을 갖는 설계치도 찾을 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.228-234
• /
• 2015

The system performance improvement in dispersion managed (DM) links combined with optical phase conjugator (OPC) for compensating for optical signal distortion due to group velocity dispersion and nonlinear fiber effects has been reported. However, in DM link combined OPC, the equalities of the lengths of single-mode fibers (SMFs), the length of dispersion compensating fibers (DCFs), the dispersion coefficient of DCF, and the residual dispersion per span (RDPS) with respect to an OPC restrict a flexible link configuration. Thus, in this paper, we propose a flexible optical link configuration with inequalities of link parameters, the so-called "pseudo-symmetric configuration." Simulation results show that, in the restricted RDPS range of 450 ps/nm to 800 ps/nm, the improvement in the system performance of the proposed pseudo-symmetrically configured optical links is better than that of the asymmetrically configured optical links. Consequently, we confirmed that the proposed pseudo-symmetric configuration is effective and useful for implementing a reconfigurable long-haul wavelength-division multiplexing (WDM) network.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.273-280
• /
• 2007

The numerical methods for finding the optimal parameters in 640 Gbps (16 channels $\times$ 40 Gbps) WDM system with optical phase conjugator (OPC) are proposed, which effectively compensate the distorted overall WDM channels. The considered optimal parameters are the OPC position and the dispersion coefficient of fibers. The numerical approaches are accomplished through two different procedures. One of these procedures is that the optimal OPC position is previously searched and then the optimal dispersion coefficient is searched at the obtained optimal OPC position. The other is the reverse of the above procedure. From the numerical results, it is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem of applying the OPC into multi-channels WDM system.