• 폴리머
• /
• 제26권1호
• /
• pp.53-60
• /
• 2002

Polypropylene(PP : 연속상)/poly(styrene-co-acrylonitrile)(SAN : 분산상), 그리고 PP/poly (acronitrile-butadiene-styrene)(ABS : 분산상)블렌드를 혼합 조성, shear rate, 그리고 상용화제(PP-SAN copolymer)의 첨가량을 변화시켜가면서 이축압출기를 통해 제조하였다. 압출공정시 PP/SAN 블렌드에서 SAN을 0에서 40 wt%로 첨가함에 따라 분산상의 크기가 증가하였으며, 굴곡강도와 인장강도는 하락하는 경향을 나타내었다. 스크류의 속도가 10에서 60 rpm으로 증가됨에 따라 분산상의 크기가 감소하였고, 굴곡강도와 인장강도는 상승하였다. 상용화제가 5 phr 첨가된 PP/SAN 블렌드에서 최대의 기계적 물성값과 최소의 분산상 크기를 나타내었다. 상용화제가 첨가됨에 따라, PP/ABS 블렌드의 굴곡강도와 인장강도가 증가되었고, 상용화제가 5 phr 첨가되었을 때 굴곡강도 및 인장강도가 최고값을 나타내었다.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.523.2-523
• /
• 1986

The hydrolysis of olive oil was attempted with immobilized C. rugosa lipase in the reverse phase solvent system. (i.e. immobilized wet particles is dispersed in continuous phase olive oil or organic solvents containing olive oil). Sephadex LH-20 and LH-60 were used as the supports that can be used in organic solvents. The water content of wet particles of sephadex LH-20 and LH-60 were about 72% (w/w) and 85% (w/w), respectively Both swollen gels with 0.05M buffers adsorbed about 18% of lipase dissolved. They were easily dispersed in liquid olive oil or in organic solvents. The effects of organic solvents on the stability and catalytic activity of the lipase have been examined. The results revealed that isooctane is superior to the other solvents examined for enzymatic fat spliting in reverse phase system. Kinetics of enzymatic hydrolys of olive oil by immobilized lipase has been investigated in a batch reactor. Effects of pH and temperature on the lipase were studied. The substrate concentration was influenced positively on the thermal stability.

• KSBB Journal
• /
• 제14권2호
• /
• pp.198-204
• /
• 1999

Asymbiotic bacterium with highly effective toxins was isolated from entomopathogenic nematode Steinernema glaseri which has been widely used against various soil-inhabiting pests. The symbiont of S. glaseri was identified as Xenorhabdus nematophilus sp. by using several biochemical and physiological tests. When this strain was released into the hemolymph of insect larva, it produced highly toxic substances and killed the larva within 2 days. Two colony forms that differed n some biochemical characteristics were observed when cultures in vitro. Phase l colonies were mucid and difficult to be dispersed in liquid. Phase II was not mucoid and was easily dispersed in liquid. It did not adsorb neutral red or bromothymol blue. Rod-shaped cell size was highly variable between two phases, ranging 2-10 ${\mu}{\textrm}{m}$. It was also found that only infective-stage nematodes can carry only primary-phase Xenorhabdus in their intestine.

• Elastomers and Composites
• /
• 제31권5호
• /
• pp.327-334
• /
• 1996

A correlative analysis has been carried out to predict the average particle size of rubber dispersed phase In high impact polystyrene manufactured by bulk polymerization. To do the correlation, a mechanistic model suggested previously by the author was used for describing the size of stabilizing particles agitated under the turbulent viscous shear subranges in a prepolymerization reactor, where the rubber particles were assumed to be formed at the time of phase inversion in the reactor. Viscosities required for the model were postulated to describe the overall behavior of butadiene rubber and polystyrene mixture along the wide range of conversion. The good agreement between the model and the experimental data from a plant was quite satisfactory for the prediction of the average rubber particle size of high impact polystyrene.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.549-555
• /
• 1991

Mullite-zirconia (0∼4 mol% yttria) composites were obtained by In-situ sintering of zircon and alumina mixture, and their mechanical properties were studied in conjuction with microstructure observation. Martensitic transformation temperature (Ms) of zirconia dispersed in the mullite matrix decreased with Y2O3 contents and was about 600$^{\circ}C$ for ZrO2 containing 4 mol% Y2O3. On cooling of this composites, tetragonal to monoclinic phase transformation induced microcracks at the grain boundary of mullite matrix. The microcracks seemed to absorb the fracture energy in stress field during mechanical tests. Therefore, toughening mechanisms of this composite were considered to nucleation and extension of microcrack, and crack deflection mechanism due to the difference of thermal expansion coefficient between matrix and dispersed phase.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.708-709
• /
• 2006

New Al-based alloys with very high ultimate tensile strength were developed in high Al concentration range of 91-95 at.% for Al-Fe-Cr-Ti-M (M: Co and Mo) systems and Al-Fe-Cr-Mo-Ti-Co system by the dispersion of nanoscale quasicrystalline particles in Al phase. The effect of adding elements, M was discussed in the viewpoint of stability of super-cooled liquid state and formation ability of quasicrystalline phase. The P/M Al-Fe-Cr-Ti-M alloys with dispersed nanoscale quasicrystalline particles exhibited ultimate tensile strength of 350MPa at 573K and 200MPa at 673K.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.287-289
• /
• 2001

The morphology of silica supported MoO$_3$ catalysts, which was prepared by impregnation of ammonium heptamolybdate with various weight loadings up to 35 wt%, was studied using x-ray diffraction. In addition to the orthorhombic phase, the behavior of the rarely studied hexagonal phase was characterized. For high loading catalysts, excess ammonium ions present in the monoclinic and triclinic precursors are capable of occupying interstitial sites of microcrystalline MoO$_3$ during moderate temperature calcinations and in doing so enhance the MoO$_3$-SiO$_2$ interaction. This results in a "well dispersed" morphology at high loadings. Sintering at high temperature is due to loss of ammonium from the oxide framework. Ammonia reimpregnation, which leads back to the well dispersed hexagonal phase, may offer a simple regeneration process for spent Mo containing catalysts.

• Archives of Pharmacal Research
• /
• 제27권1호
• /
• pp.1-12
• /
• 2004

Initial burst is one of the major challenges in protein-encapsulated microparticle systems. Since protein release during the initial stage depends mostly on the diffusional escape of the protein, major approaches to prevent the initial burst have focused on efficient encapsulation of the protein within the microparticles. For this reason, control of encapsulation efficiency and the extent of initial burst are based on common formulation parameters. The present article provides a literature review of the formulation parameters that are known to influence the two properties in the emulsion-solvent evaporation/extraction method. Physical and chemical properties of encapsulating polymers, solvent systems, polymer-drug interactions, and properties of the continuous phase are some of the influential variables. Most parameters affect encapsulation efficiency and initial burst by modifying solidification rate of the dispersed phase. In order to prevent many unfavorable events such as pore formation, drug loss, and drug migration that occur while the dispersed phase is in the semi-solid state, it is important to understand and optimize these variables.

• 공업화학
• /
• 제16권1호
• /
• pp.34-38
• /
• 2005

직경이 0.102 m이고 높이가 2.5 m인 유동층 액-액 추출기에서 액적의 크기와 분포 그리고 상승속도의 특성에 대하여 연구하였다. 분산상(0~0.04 m/s)과 연속상(0.02~0.14 m/s)의 유속변화, 그리고 유동고체 입자의 크기변화(1.0, 2.1, 3.1, 6.0 nm)에 따른 액적의 특성을 검토하였다. 액적의 흐름 거동은 추출기 내부에서 액적의 흐름 거동은 분산상과 연속상의 증가와 액적의 크기에 따라 상당히 영향을 받았다. 액적의 크기는 분산상의 속도가 증가함에 따라 증가하였지만, 유동입자의 크기가 증가함에 따라 따라서는 감소하는 경향을 나타내었다. 그러나 연속상의 유속이 증가함에 따른 액적의 크기는 국부적인 최대값을 나타낸 후 감소하는 경향을 나타내었다. 액적의 크기와 상승속도는 실험변수들과 잘 상관됨을 알 수 있었다.

• 대한화장품학회지
• /
• 제11권1호
• /
• pp.21-31
• /
• 1985

폴리옥시에틸렌 도데실 에테르 유도체로 안정화된 헥산 - 물의 유화계에서 소량의 장쇄알칸 및 장쇄알칸올이 유화안정도에 미치는 효과를 비교 검토하였다. 장쇄알칸의 계면장력 및 원심분리에 의한 유화 안정도에 거의 영향을 주지 않았으나 장쇄알칸올은 계면장력을 현저히 저하시켰으며, 원심분리시 coalescence에 의한 유화파괴 방지에 효과적이었다. 그러나 시간 경과에 따른 유화안정도는 장쇄알칸이 장쇄알칸올 보다 더욱 효과적이었고 또 탄화수소쇄 길이가 길어질수록 더욱 효과적이었다. 이러한 것을 유화제를 변경시켰을 경우에도 마찬가지였다. 이것은 장쇄알칸을 첨가함으로써 분산상의 소수결합력을 증대시켜 물에 대한 용해도가 감소되어 분자확산에 의한 유화파괴가 어려워지기 때문이다. 즉 이러한 유화계에서 유화파괴는 coalescence보다는 분자확산에 의해 지배됨을 알 수 있다.