• Applied Microscopy
• /
• v.35 no.4
• /
• pp.64-73
• /
• 2005

In this paper we discussed in details how to determine the nature of dislocations in a crystal such as a Burgers vector, the line vector of dislocation and the associated slip plane, using LACBED and usual imaging techniques. These techniques basically involve the application of Cherns and Prestone s rules, the simulations of LACBED patterns with a certain form of the dynamical diffraction theory. The theoretical aspects including necessary approximations for calculations also were in details discussed. As a test specimen for experiments, the foils of a pure aluminum, containing many dislocations with appropriate density for LACBED experiments, were used..

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.90-106
• /
• 1995

The "O"S' BONDING make metallic and non-metalic crystal structures and form localized superconducting orbitals , which induce electrical conduction , semi-conduction, and superconduction. The orbitals are proced by Ampere's law, Faraday's law , Meissner effect, highcritical temperature of thecopper oxide layers. abnomal trans-membrane signal in cancer cell and plastic deformations bytwins and dislocations, In the case of alloying metals, the most deterimentla cases of electrical conduction are those of solid solution and intermetalic compound . The highest case for the hardness are also those of solid solution and intermetallic compound. It explains the contributions of the "O"S' BONDING for conduction bands and plastic deformation by twins and dislocations.ns and dislocations.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.205-211
• /
• 1996

Structural studies have been performed on precipitation hardening discovered in $Ll_2$-ordered $Ni_3$(Al,Cr) containing 0.2 and 0.5 mol% of carbon in terms of transmission electron microscopy(TEM). By aging at temperatures around 1073 K after solution treatment at 1423 K, fine polyhedral precipitates appear firstly on the dislocations and then in the matrix. The selected area electron diffraction (SAED) studies revealed that these particles are a $M_{23}C_6$ type carbide which has the cube-cube orientation relationship with the matrix lattice. Weak-beam electron microscopy observations of deformation induced dislocations suggested that the dislocations bypass the carbide particles during deformation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.132-132
• /
• 2011

The sheet resistance (Rs) of undoped GaN films on AlN/c-plane sapphire substrate was investigated in which the AlN films were grown by R. F. magetron sputtering method. The Rs was strongly dependent on the AlN layer thickness and semi-insulating behavior was observed. To clarify the effect of crystalline property on Rs, the crystal structure of the GaN films has been studied using x-ray scattering and transmission electron microscopy. A compressive strain was introduced by the presence of AlN nucleation layer (NL) and was gradually relaxed as increasing AlN NL thickness. This relaxation produced more threading dislocations (TD) of edge-type. Moreover, the surface morphology of the GaN film was changed at thicker AlN layer condition, which was originated by the crossover from planar to island grains of AlN. Thus, rough surface might produce more dislocations. The edge and mixed dislocations propagating from the interface between the GaN film and the AlN buffer layer affected the electric resistance of GaN film.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.322-325
• /
• 2009

An enhanced continuum model for the size dependent strengthening of particle reinforced composites is presented. The model accounts explicitly for the enhanced strength in a discretely defined "punched zone" around the particle in a metal matrix composite as a result of geometrically necessary dislocations developed through a CTE mismatch. The size of the punched zone presents an intrinsic length scale, and this results in the size dependence of the overall behavior of the composite. Results show that predicted 0.2% offset yield stresses are increasing with smaller inclusions and larger volume fractions and this length-scale effect on the enhanced strength can be observed by explicitly including GND region around the particle.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.124-125
• /
• 2000

Since Nye and Berry$^{(1)}$ showed that in free space the electromagnetic field could contain stable, propagating phase singularities termed "dislocations", optical dislocations have been extensively investigated in nonlinear optics and laser physics. As the wave propagates, the lines of constant phase surrounding a dislocation trace out a spiral in space or in time. So these phase singularities are now usually referred to as optical vortices. Baranova and her co-workers$^{(2)}$ have shown that in fully developed speckle patterns, there is, one optical vortex accompanying each speckle spot on average. Among these vortices there are networks in phasemap because only one phase is to be assigned in one point except optical dislocations having zero amplitude. Freund et al.$^{(3)}$ have been studied optical dislocation networks and simulations are compared with experimental results. (omitted)

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2010

Yttria stabilized zirconia (Y-CSZ) single crystals show plastic deformation at high temperatures by activating dislocations. The effect of strain rate on the plastic behavior of this crystal was studied. As increasing strain rate from $\varepsilon=1.04\times10^{-5} sec^{-1}$ to $2.08\times10^{-5} sec^{-1}$ the yield drop was suppressed and resulted in higher Young's modulus and yield stress. Dislocation structures of the strained crystals were analyzed using a transmission electron microscope to elucidate the plastic behavior of these crystals. In the early stage of plastic deformation, dislocation dipoles and prismatic dislocation loops were formed in both samples. However, dislocation density was increased by increasing strain rate. Strong sessile dislocations were observed in the sample with higher strain rate, which may cause the higher work hardening.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.1
• /
• pp.55-62
• /
• 1997

The morphology of deformation induced dislocations in polycrystalline $Ni_3$(Al, Cr) containing $M_{23}C_6$ precipitates has been investigated in terms of transmission electron microscopy(TEM). Fine Polyhedral precipitates of $M_{23}C_6$ appeared in the matrix by aging at temperatures around 973 K after solution annealing at 1423 K. TEM examination revealed that the $M_{23}C_6$ phase and the matrix lattices have a cube-cube orientation relationship and keep partial atomic matching at the {111} interface. After deformation at temperature below 973 K, typical Orowan loops were observed surrounding the $M_{23}C_6$ particles. At higher deformation temperatures, the Orowan loops disappeared and the morphology of dislocations at the particle-matrix interfaces suggested the existence of attractive interaction between dislocations and particles. The change of the interaction modes between dislocation and particles with increasing deformation temperature can be considered as a result of strain relaxation at the interface bet ween matrix and particles.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.137-144
• /
• 2011

Strengthening mechanisms in an ordered intermetallic compound containing coherent precipitates of lower antiphase boundary energy than the matrix were investigated on the basis of the interaction between the deformation induced dislocations and the disordered precipitates in an $Ll_2$ ordered $Ni_3Al$-based alloy. Extra work was needed to pull out the dislocations from the precipitate, which was dependent on the difference in the antiphase boundary energy between the matrix and the precipitate, as well as the size and volume fraction of the precipitate. The strength of the $Ll_2$ ordered ${\gamma}^{\prime}$ phase containing fine precipitates of the disordered ${\gamma}$ phase was examined using the proposed model. The model can explain almost quantitatively the age hardening behavior of the $Ll_2$ ordered ${\gamma}^{\prime}$ phase.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.143-148
• /
• 2002

Purpose: We examined patients to evaluate the clinical results of traumatic metacarpophalangeal(M-P) dislocations of the thumb, uncommon and irreducible. Materials and Methods: In 11 traumatic M-P dislocations of the thumb, the types of dislocations were 10 dorsal and 1 volar dislocations resulted from the impacted and hyperextended forces on thumb. Authors evaluated the possibility of closed reduction, the anatomical structures interfering with closed reduction, and the surgical approaches. Results: Eight cases were treated with open reduction through volar approach and two cases were treated with closed reduction. Joint fusion was done with a plate in a chronic case. Initial closed reduction was attempted in all cases, but succeeded in only 2 cases because the interposed ruptured volar plate, the flexor pollicis brevis tendon and ulnar sesamoid bone at the volar side of the M-Pjoint were the obstacles to reduce. The metacarpal head was caught in button-hole slit between theflexor pollicis brevis and the ruptured volar joint capsule in all cases. Conclusion: Similar with the M-P joint dislocations of other fingers, the dorsal complex M-P dislocations of the thumb due to hyper extension are unusual and can't easily be reduced by closed manipulation. It is necessary to pay attention to the ruptured volar plate, capsule, the subluxated portion ofthe sesamoid and flexor pollicis brevis as interfering structures.