• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.82-89
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the shear strength characteristics according to the area replacement ratio of RAP and the relative density of in-situ ground was studied through soil laboratory tests and large direct shear tests in a model ground. As a result, the internal friction angle tends to increase in proportion to in-situ relative density(Very Loose, Loose, Medium) in composite ground formed by the same area replacement ratio of RAP and also increase in proportion to increasing the area replacement ratio(30, 40, 50%) of RAP in the same ground condition. Furthermore, the comparative analysis between the experimental value and theoretical value of the shear strength is carried out.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.93-99
• /
• 2011

This study was performed to compare the shear strength of the bondings between stainless steel crown/direct type composite resin and stainless steel crown/indirect type composite resin. Four groups of bonding conditions were prepared. Two groups of bonding conditions were made by the indirect type composite resin system and the other two groups were made by the direct type composite resin system. The shear strength tests were carried out using universal testing machine, Model 4465 of Instron Co.. It was indicated that the bond strength values of the indirect type composite resins were higher than those of the direct type composite resins. TE-SE group was superior to the TE-ONE in indirect type resin system. These results were thought to be the high degree of the polymerization accompanied with temperature and pressure of the resin of indirect type resin. It was also found that indirect composite resin contains less amount of porosity in resin.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.283-291
• /
• 1990

The purpose of this study was to measure and compare tensile and shear strength for 4 types of new direct-bonding brackets and same brackets after recycling and to evaluate the change of bracket slot width after recycling. Four types of new direct-bond brackets were bonded to recently extracted human premolar teeth and the tensile and shear strength was measured by Universal Testing Machine. The brackets were recycled by chemical process and the tensile and shear test was repeated. To evaluate the change of the bracket slot width, slot width was measured by the Topcon Universal Measuring Microscope before and after recycling. Following results were obtained: 1. There was no satistically significant difference between the tensile and shear strength of recycled brackets and those of new brackets. 2. In both new and recycled brackets, the tensile and shear strength of perforated base bracket was lower than those of photoetched, foilmesh and contou-lok mesh base brackets. (P<0.01) 3. There was no statistically significant difference in bonding strengths of control group bonded only once and two times. 4. There was no statistically significant difference in the change of the bracket slow width after recycling process. 5. Of the failure, the combination type (58%) in the tensile strength and the tooth adhesive interface (65%) in the shear strength was the most common type.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.282-283
• /
• 2014

An active study on UHPC, which has been recently used in high-rise building and bridges, is in progress. However, research on adhesion strength of normal concrete and UHPC is required to be studied due to the lack of information. In this study, experimental research progress for adhesion strength (shear strength of adhesive surface) evaluation of Bi-compressive strength concretes (UHPC, Normal concrete) is proceeded. First, specimens using glue are produced and surface treatment methods of concrete bonded section are considered. Second, Direct Shear test is applied on concrete bonded section of UHPC (80~180MPa) and Normal Concrete (NC). As a result of this study, it is confirmed that bond strength is deteriorated as the difference of intensity ration of NC and UHPC increases.

• 한국지반환경공학회 논문집
• /
• 제17권2호
• /
• pp.41-49
• /
• 2016

본 논문에서는 HDPE 표면처리(textured) 지오멤브레인의 경계면 전단거동을 파악하고자 하였다. 표면처리 지오멤브레인과 marl, 그리고 직포(woven geotextile)와의 경계면에서 발생하는 경계면 전단강도를 측정하였으며, 표면처리의 영향을 파악하기 위해 매끈한(smooth) 지오멤브레인과 직포와의 경계면 전단강도를 측정하여 비교 분석하였다. 경계면 전단강도는 대형직접전단 시험기를 이용하여 측정하였으며, 다양한 조건에 대해 거동 변화를 알아보기 위해 수침조건과 수직응력을 변화시켰다. 시험에 사용된 수직응력은 총 6단계로 저압(12, 24, 45kPa)과 고압(100, 500, 1,000kPa)으로 구분하여 적용하였다. 시험결과 수침에 의한 경계면 전단강도의 감소는 유의미한 수준으로 나타났으며, 수직응력의 영향은 불확실했다. 표면처리 여부에 따라 경계면 전단강도는 큰 차이를 보여주었는데 매끈한 지오멤브레인의 경계면 전단강도는 표면처리 지오멤브레인에 비해 절반까지 감소하는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.75-85
• /
• 2004

폐기물 매립장의 침출수를 차수하기 위한 목적으로 다양한 토목섬유들이 폭 넓게 사용되어지고 있다. 이런 토목섬유 사이의 접촉 전단강도는 매립장 바닥차수 시스템 및 종료 매립장 커버 시스템 설계 시 구조물의 안전에 중요한 영향을 주는 설계정수임이 틀림이 없다. 본 연구에서는 폐기물 매립장 설계 시 중요한 설계정수인 토목섬유(지오멤브레인과 지오텍스타일 또는 토목섬유 점토 차수재) 사이의 접촉 전단강도를 산정하기 위하여 대형 직접전단 시험을 수행하였다. 특히, 대부분의 토목섬유가 강우, 침출수 및 지하수에 쉽게 영향을 받기 때문에 토목섬유의 접촉 전단강도에 대한 함수비의 영향을 고려한 연구를 수행하였다.

• 한국방재학회 논문집
• /
• 제9권1호
• /
• pp.27-32
• /
• 2009

본 연구의 주목적은 아스팔트 포장층간의 접착전단강도를 측정하는 실험법과 평가 방법을 개발하고 배수성 포장에 사용되는 택코트 재료의 특성과 적정 살포량을 평가하고자 하였다. 실험에는 두 종류(RSC-4, 개질유화)의 유화아스팔트와 가열 아스팔트바인더 타입(HM-1) 한 종류로 실시하였으며, HM-1은 배수성 포장에 사용하기 위해 새로 개발된 제품이다. 접착전단강도를 측정하기 위해 직접전단실험을 다양한 실험 조건에서 수행하였다. 실험을 통해 얻은 접착전단강도 값은 결과의 변별력이 떨어 졌으며 하중-변위 곡선의 면적인 터프니스가 접착전단강도를 평가하는데 보다 유용한 것을 확인 할 수 있었다. 배수성 포장의 경우 RSC-4의 경우는 $0.8l/m^2$ 이상, 개질유화아스팔트의 경우는 $0.5{\sim}0.6l/m^2$의 살포량이 적당한 것으로 나타났다. Trackless 성능이 우수한 HM-1은 유화 아스팔트 택코트에 비해 월등히 좋은 접착전단성능을 발휘하는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.31-45
• /
• 2019

In this study the spatial variability of soils is substantiated physically and numerically by using random field theory. Heterogeneous samples are fabricated by combining nine homogeneous soil clusters that are assumed to be elements of an adopted random field. Homogeneous soils are prepared by mixing different percentages of kaolin and bentonite at water contents equivalent to their respective liquid limits. Comprehensive characteristic laboratory tests were carried out before embarking on direct shear experiments to deduce the basic correlations and properties of nine homogeneous soil clusters that serve to reconstitute the heterogeneous samples. The tests consist of Atterberg limits, and Oedometric and unconfined compression tests. The undrained shear strength of nine soil clusters were measured by the unconfined compression test data, and then correlations were made between the water content and the strength and stiffness of soil samples with different consistency limits. The direct shear strength of heterogeneous samples of different stochastic properties was then evaluated by physical and numerical modelling using FISH code programming in finite difference software of $FLAC^{3D}$. The results of the experimental and stochastic numerical analyses were then compared. The deviation of numerical simulations from direct shear load-displacement profiles taken from different sources were discussed, potential sources of error was introduced and elaborated. This study was primarily to explain the mathematical and physical procedures of sample preparation in stochastic soil mechanics. It can be extended to different problems and applications in geotechnical engineering discipline to take in to account the variability of strength and deformation parameters.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.361-372
• /
• 2016

The soil-concrete interface shear strength, although has been extensively studied, is still difficult to predict as a result of the dependence on many factors such as normal stresses, surface roughness, particle sizes, moisture contents, dilation angles of soils, etc. In this study, a well-known rigorous statistical learning approach, namely the least squares support vector machine (LS-SVM) realized in a ubiquitous spreadsheet platform is firstly used in estimating the soil-structure interface shear strength. Instead of studying the complicated mechanism, LS-SVM enables to explore the possible link between the fundamental factors and the interface shear strengths, via a sophisticated statistic approach. As a preliminary investigation, the authors study the expansive soils that are found extensively in most countries. To reduce the complexity, three major influential factors, e.g., initial moisture contents, initial dry densities and normal stresses of soils are taken into account in developing the LS-SVM models for the soil-concrete interface shear strengths. The predicted results by LS-SVM show reasonably good agreement with experimental data from direct shear tests.