• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.29-30
• /
• 2010

Cotton fabric is usually dyed with anionic dyes such as direct and reactive dyes. Naturally, there is no affinity for basic dyes to cotton fiber. In this study, to improve the dyeability of cotton fiber with cationic dyes, the fabric was pretreated with air plasma and grafted with acrylic acid to create acidic groups on the surface of cotton fibers. The grafted samples were dyed with natural cationic dye extracted from roots of berberis vulgaris. The effect of plasma treatment and grafting of acrylic acid on the color strength of cotton fabric was studied.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• Clean Technology
• /
• v.22 no.1
• /
• pp.16-28
• /
• 2016

Textile industry is considered as one of the most polluting sectors in terms of effluent composition and volume of discharge. It is well known that the effluents from textile dying industry contain not only chromatic substances but also large amounts of organic compounds and insolubles. The azo dyes generate huge amount of pollutions among many types of pigments. In general, the electrochemical treatments, separating colors and organic materials by oxidation and reduction on electrode surfaces, are regarded as simpler and faster processes for removal of pollutants compared to other wastewater treatments. In this paper the electrochemical degradation characteristics of dye wastewater containing CI Direct Blue 15 were analyzed. The experiments were performed with various anode materials, such as RuO₂/Ti, PtO₂/Ti, IrO₂/Ti and graphite, with stainless steel for cathode. The optimal anode material was located by changing operating conditions like electrolyte concentration, current density, reaction temperature and initial pH. The degradation efficiency of dye wastewater increased in proportion to the electrolyte concentration and the current density for all anode materials, while the temperature effect was dependent on the kind. The performance orders of anode materials were RuO₂/Ti > PtO₂/Ti > IrO₂/Ti > graphite in acid condition and RuO₂/Ti > IrO₂/Ti > PtO₂/Ti > graphite in neutral and basic conditions. As a result, RuO₂/Ti demonstrated the best performance as an anode material for the electrochemical treatment of dye wastewater.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.156-164
• /
• 2003

It has been known that the natural colorants exhibit good dye-uptake toward cotton, silk, and wool fibers, while they do poorly toward synthetic fibers. This study utilizes the chitosan treatment in order to improve the dye-uptake for the natural fibers and to enable the synthetic fibers, whose dye-uptake levels are low, show better affinity toward the natural colorants. Since chitosan has $-NH_2$ group and -OH group in the structure, the dyeability of the fabric will be improved when the fabric is treated with the chitosan. Cotton fabric as one of the natural fiber fabrics and nylon fabric as one of the synthetic fiber fabrics were selected for this study. 1. In case of cotton fabric, the chiosan treatment takes effect for the Caesalpinia sappan and cochineal, resulting in remarkable ${\Delta}E$ increase after dyeing. Chitosan helps in developing dark shade by increasing the uptake of the Caesalpinia sappan and cochineal. It does not, however, participate in the developing of the specific color as does a metallic mordant. 2. In case of dyeing cotton fabric with Gardenia jasminoides, the effect of the treatment with mordant and chitosan is not very pronounced. It is thought that the Gardenia jasminoides uptake is accomplished in a direct manner in the cellulose chains without the aid of mordant. 3. Air-permeability is decreased when the non-mordanted and non-chitosan treated cotton fabric is dyed with Caesalpinia sappan, cochineal, and Gardenia jasminoides. 4. In case of nylon fabric, premordanting and chitosan treatments are not highly effective in promoting the dye-uptake.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.

• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.79-84
• /
• 2024

As microchips' degree of integration is getting higher, its cooling problem becomes important more than ever. One of the promising methods is using fractal microchannel heat sink by mimicking nature's Murray networks. However, most of the related works have been progressed only by numerical analysis. Perhaps such lack of direct experimental studies is due to the technical difficulty of the temperature and heat flux measurement in complex geometric channels. Here, we demonstrate the direct visualization of in situ temperature profile in a fractal microchannel heat sink. By using the temperature-sensitive fluorescent dye and a transparent Polydimethylsiloxane window, we can map temperature profiles in silicon-based fractal heat sinks with various fractal scale factors (a=1.5-3.5). Then, heat transfer rates and pressure drops under a fixed flow rate were estimated to optimize hydrodynamic and thermal characteristics. Through this experiment, we found out that the optimal factor is a=1.75, given that the differences in heat transfer among the devices are marginal when compared to the variances in pumping power. This work is expected to contribute to the development of high-performance, high-efficiency thermal management systems required in various industrial fields.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.254-256
• /
• 2007

The Solar energy is either used as a solar thermal energy or converted to electrical power through power conversion system. The latter method is defined as a solar cell changing the solar energy into the direct electric energy or power conversion that convert the dc power into ac power.For the solar cell to be a practical alternative energy, the study should be focused not only on the solar cell ,but also the power conversion system for common power source. In this study, we get the suitable power to common load ,using Ag Grid DSC(Dye-sensitized solar cell). Our purpose is to achieve the common solar cell power generation system ,using converter and PWM(Pulse width modulation) inverter system controled by DSP.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.79-89
• /
• 2007

The effect of chitosan treatment on the dyeing and dye fastness, and mechanical properties of hair was investigated in this study when the carotinoid dyestuffs extracted from African Marigold(Tagetes erecta L.) were applied to the hair. The sequences of the chitosan treatment were changed in dyeing and mordanting procedures, i.e., pre-treatment, mid-treatment, and post-treatment. While the effect of chitosan application on the color shade change was not significant, the pre-treatment of the chitosan increased the dye uptake. Discoloration and fading was observed in the lightfastness test when chitosan was mid-treated. Alkali perspiration and acid perspiration fastness test results showed that chitosan post-treatment gave lower tendency. Washing fastness results showed that chitosan post-treatment and mid-treatment gave lower values, which indicates that chitosan deters the direct formation of insoluble complex among fiber-dyestuff-mordant. In the mechanical characteristics results, however, initial modulus and breaking strength increased significantly in the post-treatment and pre-treatment of chitosan.

• Molecular & Cellular Toxicology
• /
• v.1 no.2
• /
• pp.92-98
• /
• 2005

DNA microarray analysis of gene expression in toxicogenomics typically requires relatively large amounts of total RNA. This limits the use of DNA microarray when the sample available is small. To confront this limitation, different methods of linear RNA amplification that generate antisense RNA (aRNA) have been optimized for microarray use. The target preparation strategy using amplified RNA in DNA microarray protocol can be divided into direct-incorporation labeling which resulted in cDNA targets (Cy-dye labeled cDNA from aRNA) and indirect-labeling which resulted in cRNA targets (i.e. Cy-dye labeled aRNA), respectively. However, despite the common use of amplified targets (cDNA or cRNA) from aRNAs, no systemic assessment for the use of amplified targets and bias in terms of hybridization performance has been reported. In this investigation, we have compared the hybridization performance of cRNA targets with cDNA targets from aRNA on a 10 K cDNA microarrays. Under optimized hybridization conditions, we found that 43% of outliers from cDNA technique and 86% from the outlier genes were reproducibly detected by both targets hybridization onto cDNA microarray. This suggests that the cRNA labeling method may have a reduced capacity for detecting the differential gene expression when compared to the cDNA target preparation. However, further validation of this discordant result should be pursued to determine which techniques possesses better accuracy in identifying truly differential genes.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.147-147
• /
• 2000

본 연구는 화장지용 펼프원료로 저급지인 색지(color ledger)고지를 사용함으로써 생산원 가를 절감하기 위한 목적으로 실시되었다. 일반적으로 색지 고지는 azo dyes, stilbene dyes, c copper phthalocyanine dyes와 같은 직접염료(direct dye)로 착색돼있는 것으로 보고되고있 다[) 한편, 펄프표백에 사용되는 약품은 hydrogen peroxide(HzOz), ozone(03), sodium h hypochloriten업oeD와 같은 산화표백제들과 F AS (formamidine sulfinic acid), sodium h hydrosulfite(NazSz04)와 같은 환원표백제들이 사용되는 것으로 널리 알려져 있다. 보통 화 장지용 펄프는 백색도가 78%이상이 되어야만 제품생산에 사용할 수 있는 것으로 인식되고 있다. 따라서 색지 고지를 이 목표로 달성하기 위한 탈색방법을 확립코자 다음과 같은 2가 지 실험을 실시하였다. 먼저, 색의 3원색인 빨강, 노랑, 파랑색의 색지 고지를 동일한 양으로 혼합하여 PY, HY, YH, YH, HY와 같은 5가지 방법의 실험을 실시하였다. 이중 YH 방법 이 가장 우수한 것으로 나타났다. 이 결과를 근거로 하여 여러 가지 색으로 구성된 색지 고 지가 50% 함유한 백상지 고지를 사용하여 Table과 같은 약품 및 조건으로 표백을 겸한 탈 묵실험을 실시하였다. 이 실험에서 백색도 81.8%, L* 93.3, a* -0.5, b* 4.1의 결과를 얻었다. 색지 고지의 탈색은 Y 단계에서 pH와 온도에 큰 영향을 받는 것으로 본 실험을 통하여 알 수가 있었다.