• 산업기술연구
• /
• 제20권A호
• /
• pp.203-209
• /
• 2000

The fluctuation integrals which give useful information in the structure of solution are associated with the mixed direct correlation integral ($C_{12}$) known. Using its weighted arithmetic mean of $C_{11}$ and $C_{22}$ and the activity coefficient model, the fluctuation integrals on solute-solute, solvent-solute, and solvent-solvent can be calculated in the function of mole fraction. In this work, several binary mixtures containing c-hexane were tested and the results on the fluctuation integrals were rather good.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.189-198
• /
• 1998

Recently, monitoring of tool life is a matter of common interesting because tool life affects precision, productivity and cost in machining process. Especially flank wear has a direct effect on cutting mechanism, so the various pattern of cutting force is obtained experimentally according to variation of wear condition. By investigating cutting force signal, AR(Autoregressive) modeling and correlation dimension analysis is conducted in turning operation. In this modeling and analysis, we extract features through 6th AR model, correlation integral and normalized correlation integral. After the back-propagation model of the neural network is utilized to monitor tool life according to flank wear. As a result. a very reliable classification of tool life was obtained.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.945-947
• /
• 2001

The He-Xe interaction potential has been determined using a direct inversion of the experimentally reduced-viscosity collision integrals obtained from the corresponding states correlation. The potential is in a good agreement with the previously determined potential. The potential predicts viscosity and diffusion coefficients and they are found to be in a good agreement with experiment.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.190-196
• /
• 2013

커브형 집적 영상 기술은 렌즈 배열을 이용하여 3D 영상을 공간에 쉽게 표현할 수 있는 기술이며, 넓은 관측각을 제공한다. 본 논문에서는 커브형 집적 영상에서 물체의 인식 향상을 위하여 다이렉트 픽셀 매핑 (DPM) 방법 기반의 비선형 상관기를 제안한다. 제안하는 비선형 상관기는 커브형 집적 영상 시스템에서 장애물에 가려진 물체로부터 픽업된 요소 영상을 DPM 방법을 통하여 해상도가 향상된 새로운 요소 영상을 생성한다. 새로운 생성된 요소 영상을 사용하여 복원한 3D 영상들과 참조 영상간의 비선형 상호상관을 이용하여 3D 물체의 인식 성능 향상시킨다. 제안된 방법의 유용함을 보이기 위하여 기초적인 상관 관계 실험을 수행하고 기존의 방법과의 비교 결과를 보고한다.

• 한국통신학회논문지
• /
• 제37권2A호
• /
• pp.128-134
• /
• 2012

본 논문에서는 커브형 집적영상 시스템에서 부분적으로 가려진 먼 거리 3차원 물체의 인식 향상을 위한 새로운 direct pixel-mapping (DPM)방법을 제안한다. 제안 방법은 커브형 집적영상 시스템에서 DPM 방법에 의해 먼 거리에 위치한 3차원 물체로부터 픽업된 요소영상배열 (elemental image array, EIA)은 가시적으로 가까운 거리에서 픽업한 것과 같은 새로운 요소영상배열을 생성한다. 이러한 특성은 재생한 3차원 물체 영상의 해상도를 향상 시킬 수 있고, 이로 인하여 먼 거리에 위치한 3차원 물체에 대한 인식 성능을 향상 시킬 수 있다. 컴퓨터적 실험결과와 기존 방법과의 비교를 통하여 제안방법으로 재생한 물체의 PSNR과 NCC의 값이 평균 1.75dB와 4.56% 향상됨을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.675-687
• /
• 2019

As the bridges are an integral part of the transportation network, their function as one of the most important vital arteries during an earthquake is fundamental. In a design point of view, the bridges piers, and in particular the wall piers, are considered as effective structural elements in the seismic response of bridge structures due to their cantilever performance. Owing to reduced seismic load during design procedure, the response of these structural components should be ductile. This ductile behavior has a direct and decisive correlation to the development of plastic hinge region at the base of the wall pier. Several international seismic design codes and guidelines have suggested special detailing to assure ductile response in this region. In this paper, the parameters which affect the length of plastic hinge region in the reinforced concrete bridge with wall piers were examined and the sensitivity of these parameters was evaluated on the length of the plastic hinge region. Sensitivity analysis was accomplished by independently variable parameters with one standard deviation away from their means. For this aim, the Monte Carlo simulation, tornado diagram analysis, and first order second moment method were used to determine the uncertainties associated with analysis parameters. The results showed that, among the considered design variables, the aspect ratio of the pier wall (length to width ratio) and axial load level were the most important design parameters in the plastic hinge region, while the yield strength of transverse reinforcements had the least effect on determining the length of this region.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.436-445
• /
• 2014

Objectives: Time-activity studies have become an integral part of comprehensive exposure assessment and personal exposure modeling. The aims of this study were to estimate exposure levels to nitrogen dioxide($NO_2$) and volatile organic compounds(VOCs), and to compare estimated exposures by using time-activity patterns and indoor air concentrations. Methods: The major microenvironments for office workers were selected using the Time-Use Survey conducted by the National Statistical Office in Korea in 2009. A total of 9,194 and 6,130 workers were recruited for weekdays and weekends, respectively, from the Time-Use Survey. It appears that workers were spending about 50% of their time in the house and about 30% of their time in other indoor areas during the weekdays. In addition, we analyzed the time-activity patterns of 20 office workers and indoor air concentrations in Daegu using a questionnaire and time-activity diary. Estimated exposures were compared with measured concentrations using the time-weighted average analysis of air pollutants. Conclusions: According to the time-activity pattern for the office workers, time spent in the residence indoors during the summer and winter have been shown as $11.12{\pm}2.20$ hours and $12.48{\pm}1.77$ hours, respectively, which indicates higher hours in the winter. Time spent in the office in the summer has been shown to be 1.5 hours higher than in the winter. The target pollutants demonstrate a positive correlation ($R^2=0.076{\sim}0.553$)in the personal exposure results derived from direct measurement and estimated personal exposure concentrations by applying the time activity pattern, as well as measured concentration of the partial environment to the TWA model. However, these correlations were not statistically significant. This may be explained by the difference being caused by other indoor environments, such as a bar, cafe, or diner.