• Macromolecular Research
• /
• 제11권2호
• /
• pp.110-114
• /
• 2003

When using the dipping method for crystal formation, mono-layered colloidal crystal structures depend upon the lift-up rate of a glass substrate. The mono-layered colloidal crystals showed the highest quality when the glass substrate was raised at a rate of 3 mm/min at 25 $^{\circ}C$ in a 1 wt% polystyrene colloidal suspension (ethanol medium). In addition, in order to obtain multiple-layered colloidal crystals, an external electric Held was introduced. Multiple-layered colloidal crystals were successfully obtained via this method. The colloidal particles were well ordered over large areas and assembled into a homogeneous structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.860-863
• /
• 1992

In this paper, we investigate $\pi$-A isotherms of biological lipid layer such as cholesterol and phosphatidyl choline to study a gas sensor characteristics which response only to specific materials. And, we also deposit it on the surface of quartz crystal by vertical dipping method and horizontal lifting method. Then, we evaluate the deposition status of cholesterol and phosphatidyl choline LB film using AT-cut quartz crystal. We obtain the following results: (1) Cholesterol's solid surface pressure is about 20$\sim$40(dyne/cm) and limiting area is about 50${\AA}^2$/molecule. And, phosphatidyl choline's surface pressure is about 25$\sim$40(dyne/cm) and limiting area is about 20 ${\AA}^2$/molecule. (2) When LB films are deposited, the deposition ratio is coincident with the frequency shift. Therefore, we can evaluate the deposition status of LB film. (3) For cholesterol, Y type LB films are deposited up to 15 layers by vertical dipping method. (4) For phosphatidyl choline, X typo LB films are deposited to 15 layers by horizontal lifting method. But, in case of vertical dipping method, the deposition status is not good.

• 한국포장학회지
• /
• 제27권3호
• /
• pp.181-186
• /
• 2021

결구상추의 수확후 물올림을 위한 처리를 위해서 육묘 시에 부직포 포트를 이용하여, 저장 시 선도 유지 효과를 검토하였다. 결구상추 육묘 시 프러그 트레이와 부직포 포트를 사용한 결과 수확 시 생육에 차이가 보이지 않았다. 따라서 부직포 포트를 이용한 육묘 방법이 포장 및 저장 방법 개선을 위한 물올림 처리에 이용할 수 있는 것으로 판단되었다. 수확후 결구상추의 경정(줄기)을 부직포로 감아 물올림을 실시한 후 포장하여 저장하면, 무포장은 생체중이 감소하는데 비해 물올림 처리는 저장 28일에 1.7%까지 증가하였다. 그 외 엽록소(SPAD), 색도(hue angle)에서 물올림 처리의 측정치가 무처리 보다 높은 결과를 보였다. 따라서 결구상추의 선도유지를 위한 효과적인 저장방법으로 물올림 처리가 효과적인 것으로 보이며, 물올림을 위한 포장의 편이를 위하여 육묘 방법의 개량 가능성을 확인하였다. 앞으로 다른 원예작물에서도 저장 후 선도를 개선하기 위해서는 재배에서부터 수확후 품질에 중점을 둔 추후의 연구가 더 필요할 것으로 사료된다.

• Journal of Ginseng Research
• /
• 제9권1호
• /
• pp.42-53
• /
• 1985

This study was carried out to obtain the basic information about the large scale propagation of ginseng (Panax ginseng C.A. Meyer). Therefore, the stem cuttings of 1-year old ginseng, treated with various concentrations of plant growth regulators for 5 seconds (quick dipping) and 24 hours (prolonged soaking), were cultured. The root formation of stem cuttings was varied with the concentrations, kinds, and treatment methods of plant growth regulators. Besides normal-looking roots various malformed roots were observed. In the prolonged soaking method, the culture of stem cuttings, treated with 10 ppm of IBA or NAA, resulted in profuse root regeneration. And stem cuttings, in quick dipping method, treated with 2000 ppm of IBA or NAA resulted in more excellent root regeneration. In general, IBA was more vigorous for the root formation than NAA, The treatment with 50 ppm kinetin or 100 ppm BA brought good result for the retardation of senescence of stem cuttings and BA treatment was more effective than kinetin. As for the saponin content of roots derived from stem cutting culture, the roots, formed by non-treatment of growth regulators, were higher in saponin content than those formed by treatment of growth regulators.

• 자원환경지질
• /
• 제32권5호
• /
• pp.495-502
• /
• 1999

Common-mid-point (CMP) seismic data on a dipping layer have have a stacking different from a horizontal layer velocity and the reflection points on data are dispersed to many positions. Therefore, the CMP data are not stacked well by the conventional stacking method using the horizontal layer velocity. The CMP gather can ideally stacked by applying dip-moveout(DMO) processing. Hence, modern seismic processing indludes DMO as an essential routine step. DMO processing techniques are broadly categorized by two, Fourier transform and integral methods, each of which has many different computational schemes. In this study, the dip-decomposition technique of the Fourier transform method is used to test the DMO effect on the synthetic scismic data generated for dipping structures. Each of constnat offset sections NMO corrected by using the layer velocity of the model and DMO processed. The resulting zero-offset sections for many offsets are stacked. The stacked sections with DMO processing show the structural boundaries of the models much better than those without DMO processing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.148-152
• /
• 2001

One set of MMIC library has been developed using gate recess etching by spin processor. It is superior than that of dipping Method in the uniformity and the reproducibility of gate recess. A DC characteristics of p-HEMT have a uniform characteristics in the whole wafer than that of dipping method. The low noise p-HEMT with the $0.6{\mu}m$ and $200{\mu}m$ of gate length and gate width, respectivily, has a uniform characteristics of Idss 130~145 mA, conductances 190~220mS/nm, and threshold voltage -0.7~-1.1V in the drain voltage of 2V.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 춘계 총회 및 학술발표회
• /
• pp.32-33
• /
• 1997

중공사막은 제조과정인 wet spining의 과정에서 defect가 형성될 수 있어 분리선택도에 큰 영향을 미친다. 이러한 defect의 처리 방법으로는 dipping method등의 방법이 현재 널리 쓰이고 있다. dipping method는 제조된 중공사막을 PDMS 등의 고분자용액 속으로 통과시켜 결과적으로 중공사막 표면에 얇은 고분자막이 형성되도록 하는 방법이다. 그러나 이러한 방법으로 중공사 막을 처리할 경우 고분자 용액이 pore내로 침입하거나 중력으로 인하여 용액이 아래쪽으로 몰려 하반부의 두께가 두꺼워진다는 단점이 있다. 본 연구에서는 플라즈마 반응기 내의 전극사이의 공간에서 substrate의 위치를 변화시켜가면서 thickness를 측정하여 중공사막의 plasma coating을 위한 기초 자료를 정립하여 중공사막 plasma 표면처리 장치 개발에 기여하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.1-10
• /
• 1999

In this paper, we have investigated the effects of the environmental factors on Low Molecular Weight (LMW) silicone fluid contents existing in high temperature vulcanized (HTV) silicone rubber sample, using dipping method and contact angle, current measurement. Artificial treatments such as immersion in water, elevated temperature, UV irradiation and dry band arcing under salt-fog condition are selected as the environmental factors. This results will be helpful to investigate the degradation with time and to expect a life time, because the LMW silicone content, which is important to recovery the hydrophobicity of silicone rubber surface, show different results by each environmental factors.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.141-141
• /
• 1995

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.89-89
• /
• 2003