• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.63-69
• /
• 2012

This paper presents the design of a calculable standard dipole antenna with a hybrid balun in the frequency range of 1 GHz to 3 GHz. A new formula of the antenna factor for a dipole antenna with a hybrid balun is derived using the power mismatch-loss concept. The antenna factors derived in this paper are in good agreement with the results calculated from S-parameters. The design results show that the calculable dipole antenna with a hybrid balun can be characterized by power mismatch-loss component factors.

• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.45-49
• /
• 2002

This paper presents the basic characteristics of a forced resonant type EMI dipole antennas for frequencies below 80 MHz in which two reactance elements are used for the impedance matching at the fined point. The input impedance of the short dipole less than half-wavelength is controlled by the properly determined loading position and the value of loading reactance. The numerical results show that the small-sized EMI dipole antenna with loller antenna factors for frequencies below 80 MHz can be realized by the reactance loading. In case tole proposed center driven forced resonant type EMI dipole antenna with 0.3 λ length is loaded from the center, the input impedance is matched at feed line with 50 $\Omega$, and hence the antenna has lower factors in the frequency range of 30 to 80 MHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.347-348
• /
• 2008

We investigate the characteristics of a dipole antenna on an artificial magnetic conductor (AMC) constructed of a normal material and a ground plane. We studied how the antenna performance is affected by changes in the dipole length and the distance between the dipole and the ground plane. The relation between the reflection phase of the AMC and the input resistance of the dipole for input impedance matching is also verified.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.112-116
• /
• 2002

In this paper, the active integrated antenna(AIA) using a wideband printed dipole antenna and a balanced amplifier is designed and fabricated. The proposed active printed dipole antenna has characteristics of easy matching, wide bandwidth and higher output power To feed balanced signal to printed dipole, a Wilkinson power divider and delay lines are used. The measured result shows that, at 6 GHz center frequency, the impedance bandwidth is 22 % (VSWR < 2), 3 dB gain bandwidth is 28 %, the maximum gain is 14.77 dBi, and output power at P1 dB point is 23 dBm.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.329-339
• /
• 1999

LPDA(Log-Periodic X Dipole Antenna)에 비하여 안테나 붐의 길이가 짧으면 서도 복사특성이 우수한 대수주기 안테나로서 X 다이폴을 구성소자로 하는 LPXDA(Log-Periodic X Antennas)를 제안하였다. 500MHz~1,000MHz에서 동작하는 LPXDA를 설계하고 모멘트법을 이용하여 설계안테나의 본사특성을 해석하여 LPDA의 특성과 비교 검토하였다. 그 결과 본 논문에서 제시한 LPXDA가 LPDA보다 붐의 길이가 20%짧으면서도 주파수 변화에 따른 복사특성이 우수한 것으로 나타났으며 LPXDA의 측정결과도 계산결과에 근접하는 것으로 나타났다.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.227-233
• /
• 2011

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-${\Omega}$ microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the -10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1365-1368
• /
• 2014

A CPW-fed to CPS dipole antenna of triangular loop director by microstrip tapered balun is proposed for dual and wide band operations, in this paper. The proposed antenna is consisted of a CPW-fed to CPS transform, microstrip tapered balun element, CPS dipole driver and triangular loop director. A dual and wide bandwidth of the proposed dipole antenna is realized by introducing the triangular loop director and taper matching element. The operated frequency bandwidth is 1GHz (2.14~3.14 GHz) and 1.9 GHz (4.6~6.5 GHz) to return loss criterion of less than 10 dB. The measured return loss of the proposed antenna showed good results of the dual and wide band operating frequency and the radiation pattern. The proposed antenna is able to support WLAN wireless communications applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.120-123
• /
• 1999

This paper presents the design method of EMC(Electromagnetic Coupling) microstrip array antenna for CS(Communication Satellite) system. Microstrip dipole antennas are attractive elements owing to the desirable properties such as simplicity, small size and linear polarization. From the optimum simulation results by the FDTD method[1], design parameters such as EMC dipole length, width, height and offset are discussed at 12CHz. The array characteristics of 5-elements and 10-elements array are also presented. By adjusting geometry of model antenna, we can design dual polarization EMC microstrip dipole antenna for CS system. Direction of nam beam is easily tilted by the control of distance between dipole elements.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.145-149
• /
• 2006

본 논문에서는 RFID 태그용 UHF밴드 전방향성 안테나를 설계하였다. 전방향 방사특성과 소형화를 위해서 로딩 다이폴을 교차시키는 방법과 구부리진 다이폴을 교차시키는 방법을 나타내었다. 다이폴 간의 급전 위상차를 90도 되게 급전함으로써 E면 방사패턴이 전방향 특성을 갖도록 하였다. 마일라 재질 위에 칩 입력임피던스와 공액 정합되도록 구현한 3종류 안테나에 대한 반사특성은 -10 dB 기준으로 670-1,050 MHz, 700-1,250 MHz 및 600-1,020 MHz의 광대역 특성을 얻었다. E면 및 H면 모두가 무지향인 전방향 방사특성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제2권3호
• /
• pp.79-82
• /
• 1981

A calculation method of the dipole moments for square planar and tetrahedral complexes by the valence bond method has been developed and an example calculation was carried out choosing the square planar and tetrahedral $[M(Ⅱ)N_2Se_2]$ type complexes. The calculated values of the dipole moments by the valence bond method are higher than those of the approximate orbital method. We found that we may predict the geometric structure of the transition metal complexes comparing the calculated values of the dipole moments with the experimental values. A new method for definition of C' parameter has also developed on the basis of extended Huckel theory.