• 한국염색가공학회지
• /
• 제20권4호
• /
• pp.43-52
• /
• 2008

Wool fabric was treated with oxygen low-temperature plasma (LTP) and dichloroisocyanuric acid. The effect of dimensional stability (relaxation shrinkage, hygral expansion, felting shrinkage), tensile strength and elongation, crease recovery, and hand of wool fabric between LTP, DCCA treated wool fabrics and control wool fabric were investigated. SEM photograph showed that a little micro crack was formed on the fiber surface by plasma treatment with hard condition and epicuticle scale was damaged by DCCA treatment. Felting shrinkage, tensile strength and total hand value were much different in each samples.

• 소음진동
• /
• 제3권3호
• /
• pp.271-278
• /
• 1993

Acoustic characteristics of silencer system are affected by various geometric parameters such as cross sectional geometry, size of chamber, and location of inlet-outlet port. It is impossible to obtain exact solutions of the equations of acoustic wave propagation except few simple cases. So, we resort to numerical techniques to analyze performance of acoustic system. In this work, finite element formulation has been obtained to predict transmission loss of an arbitrary 3-dimensional muffler in the presence of mean flow of low mach number. The effect of the degree of the ellipticity of expansion chambers on the transmission loss has been studied using the resulting finite element equation.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.50-55
• /
• 2015

We report design and simulation of a two-dimensional (2D) silicon-based nanophotonic crystal as an optical insulator to enhance the light emission efficiency of light-emitting diodes (LEDs). The device was designed in a manner that a triangular array silicon photonic crystal light insulator has a square trench in the middle where LED can be placed. By varying the normalized radius in the range of 0.3-0.5 using plane wave expansion method (PWEM), we found that the normalized radius of 0.45 creates a large band gap for transverse electric (TE) polarization. Subsequently a series of light propagation simulation were carried out using 2D and three-dimensional (3D) finite-difference time-domain (FDTD). The designed silicon-based light insulator device shows optical characteristics of a region in which light propagation was forbidden in the horizontal plane for TE light with most of the visible light spectrum in the wavelength range of 450 nm to 600 nm.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.672-680
• /
• 1999

This paper presents an evolution program for optimal expansion problem with backlogs in demand which is to determine when and how much capacity should be added under varying types of demand and cost. To overcome premature convergence and stalling, we employ an exponential-fitness scaling scheme. To improve the chromosomes, we introduce hetero-dimensional mutation which generates a new dimension and produces a feasible solution, and homo-dimensional mutation which mutates the chromosomes in the negative of gradient direction. Finally, a numerical example is discussed.

• 대한수학회보
• /
• 제38권2호
• /
• pp.337-346
• /
• 2001

A linearization owing to Oseen originally is performed to study the recirculating Navier-Stokes flows at high Reynolds numbers. The procedure is generalized to produce higher order asymptotic expansion for the flow velocity. We call this the Oseen-type expansion of the given flow. As a concrete example, the velocity of a steady Navier-Stockes flow due to a swimming flexible sheet in two-dimensional infinite strip domain is calculated by an asymptotic expansion technic with two-parameters, the Reynolds number R and the perturbation parameter $\varepsilon$ first and then R secondly. The asymptotic result is up to second order in $\varepsilon$.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.12-21
• /
• 1996

The trellis shaping is the method of selecting a minimum weight sequence from an equivalent class of possible transmitted sequences. It is perforemed by searching through the trellis diagram of a shaping convolutional code Cs. A shaping gain of the order of 1dB may be obtained with a simple 4-state shaping code. But when the rellis shaping is applied to multi-dimensional constellation, the shaping gain is decreased and the transmission delay is increased, which make it difficult to apply the trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping algorithm is used for the mapper in the proposed trellis shaping. The simulatio result shows that the proposed trellis shaping is better than coventional trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping on multi-dimensional costellation with respect to shaping gain and transmission delay. And the constellation expansion ratio (CER) and the capacity of transmitted injformation are identical to those of conventional trellis shaping on multi-dimensional constellation.

• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.621-633
• /
• 2009

In this paper we compare the solution of the one-dimensional beam model and the numerical solution of the two-dimensional linearized elasticity problem for rectangular domain of the beam-like form. We first derive the beam model starting from the two-dimensional linearized elasticity, the same way it is derived from the three-dimensional linearized elasticity. Then we present the numerical solution of the two-dimensional problem by finite element method. As expected the difference of two approximations becomes smaller as the thickness of the beam tends to zero. We then analyze the applicability of the one-dimensional model and verify the main properties of the beam modeling for thin beams.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1430-1431
• /
• 2006

We investigated the formation of 2-dimension hologram grating by means of selective etching characteristic and photo-expansion effect according to photo irradiation on amorphous As-Ge-Se-S thin film. By method of phase holography, we made the 2-dimensional hologram grating by each (S:P) and ($+45^{\circ}:-45^{\circ}$) polarized beam with DPSS laser(532nm) and He-Ne laser(632nm). A recording property was observed at each polarized beam through 2-dimensional hologram surface relief grating. Chalcogenide thin film was etched selectively by NaOH solution after the formation of 1-dimensional diffraction grating. And then etched sample was rotated 90 degree to fabricate 2 dimensional hologram grating. We found that it was observed the formation of 2-dimensional hologram grating by AFM(Atomic Force Microscopy).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.57.3-57.3
• /
• 2008

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.221-228
• /
• 1998

In order to look into the comparative flow characteristics between a circular contraction duct and a circular expansion duct the both centerline turbulent structures have been investigated by the hot wire anemometry. Both of the contraction and the expansion have Morel type contours. Means, turbulences, and triple moments have been measured for the turbulent kinetic energy budgets along their centerlines. It is resulted that mean velocities of both have much deviated from theoretical values calculated by one-dimensional continuity considerations, and that for the same upstream condition, the expansion maintains the isotropy in general while the contraction maintains a severe anisotropy through the whole duct. The mean transport of the TKE along the expansion is willing to balance mostly with the dissipation in the TKE budgets while that along the contraction is balanced with the production in the turbulent kinetic energy equation.