• Particle and aerosol research
• /
• v.15 no.3
• /
• pp.105-113
• /
• 2019

The exhaust emissions from coal-fired power plants have received much attention because coal-fired power plants are the one of the largest sources of particulate matter (PM) emissions in South Korea. To measure the PM10 and PM2.5, we developed the novel diluter which is comprised of ejector and porous tube in series. The dilution ratio must be defined to calculate particle concentrations of the sampled air as well as to probe match for the isokinetic sampling. For this reason, we verified the dilution ratio of the developed diluter by the flow rate, numerical solution, gas concentration and particle concentration. The ejector-supplied flow rates were 10-50 L/min and the porous tube-supplied flow rates were 30, 50 L/min in this study. All methods above showed similar dilution ratios to each other within 10 % error rate. The dilution ratio was confirmed by comparing mass concentrations before and after the dilution process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.71-75
• /
• 2001

Linear regression analyses between the electrical conductivity of the saturation-paste extract. ECe, and the electrical conductivity of the 1:5 soil extract, EC1:5, for different soils yielded different dilution factors, or slopes with significant $r^2$ values from 0.842 to 0.905. The dilution factor was inversely proportional to the cation exchange capacity of soil which reflected textural difference. The dilution factors recommended for different textural classes ranged from 6.44 for clay soil to 12.29 for sandy soil based on the CEC's of the textural classes among 350 surface soils recorded in the Taxonomical Classification of Korean Soils except volcanic ash derived soils. Though saturation percentage of the saturation-paste of the soils in this study, CEC should be taken into account for dilution factor between ECe and EC1:5, and the suggested dilution factors might be reasonable estimate for the soil textural classes.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.421-425
• /
• 1990

This study was carried out to compare lactic acid bacteria count of liquid type yogurts with various experimental conditions during shelf-life period. The conditions were media(BCP and Elliker agar), incubation conditions(aerobic and anaerobic), dilution waters(saline and phosphate buffer) and dilution methods(10 and 100 times). All of the samples were incubated at $37^{\circ}C$ for 72 hrs. In the case of counting L. acidophilus as a yogurt starter culture, there were differences on dilution waters and incubation conditions, but were no difference on media and dilution methods. In the case of counting L jugurti and mixed strain with L. acidophilus and L. casei, there were differences on media, incubation conditions and dilution waters, but was no difference on dilution methods. For L. casei in the yogurt, media and dilution methods were shown slightly different viable cell count but incubation conditions were not shown difference. In the case of counting L. bulgaricus, there were differences on media, incubation conditions and dilution methods, but was no difference on dilution waters. Therefore, the measurment of lactic acid bacteria count may be effective if preferred experimental conditions are selected for different types of strain.

• Journal of Korean Biological Nursing Science
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2010

Purpose: We tested the inhibitory effect of six purchasable alcohol hand rubs against Staphylococcus aureus. Methods: Five alcohol hand rubs were collected with random manner on the market and 1 alcohol hand rubs which is currently used in a hospital was included. we designed the experimental scheme on the basis of M7-A6 method of NCCLS. Each hand rubs were diluted to 1:1, 1:10, 1:100, 1:1,000 with tryptic soy broth. S. aureus was cultured. Turbidity and the colony counting was measured. Results: With dilution rate of 1:1, all products showed more than 95% of the inhibitory effect on bacterial growth. At 1:10 dilution, product $N^{\circ}1$, 2, 3, 4, and 5 displayed the inhibitory effect of 97.77%, 92.38%, 78.19%, 97.42%, and 96.6%, respectively. But, the inhibitory effect of product $N^{\circ}6$ has been disappeared at that dilution. Over 1:100 dilution, all products lost their inhibitory effect except product $N^{\circ}5$. Product $N^{\circ}5$ displayed more than 96% of inhibitory effect at all dilution rate, even at 1:100 and 1:1,000. Conclusion: We identified that inhibitory effect on bacterial growth of alcohol hand rubs was variable. We suggest that concentration of alcohol should be checked before choosing alcohol hand rubs. Further evaluation of in vivo study is needed.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.198-202
• /
• 1987

Toxic metabolites ('Toxins'), produced by Helminthosporium sativum causing leaf blotch in barley and root rot in barley and wheat were partially purified through C-18 column. The partially purified toxins appeared heat unstable and lipophilic. The responses of toxins to wheat and barley root corresponded with those to lettuce growth with the different concentrations. The determination of the concentration of toxins produced was developed using the dilution end-points. The equation [Y = a log X + b) was obtained from the semi-log­graphy with the linear analysis. The values 'a' and 'b' were discussed with the responses of several plants on the toxin produced by H. sativum.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.637-645
• /
• 2009

The main purpose of this study lies on the improvement of micro dilution tunnel based on the typical porous tube type chamber. The characteristics of flow and temperature fields for steady state has been obtained by numerical analysis using FLUENT. Three different geometrical variations of the porous tube; a) increase of thickness at center, b) step increase of thickness at center and downstream, c) tapered increase of thickness, have been proposed. Accordingly results are obtained and compared in terms of penetration velocity and velocity ratio to therrmophoretic velocity for improvement against particulate deposition inside the tube. The penetration velocity and velocity ratio distributions in the upstream portion and portion of impinging of dilution air are apparently shown to be improved for the case of the step and tapered change of porous tube. The tapered change of tube thickness addition are shown to be the most effective among three geometrical changes. In addition, the considerable improvement against deposition are shown that its thickness should be at least 2mm.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.4
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.789-801
• /
• 2000

This analysis was conducted for PCDDs/PCDFs in sediment by isotope dilution HRGC/HRMS method. From the result, the mean recovery of surrogate standard was in the range of 70.1-80.8%. Among the distribution of 2, 3, 7, 8-substituted isomers, the concentration of OCDD represented almost 40.6-78.5% of total concentration and that of OCDF showed 6.6-14.7% and 1, 2, 3, 4, 6, 7, 8-HpCDD showed 5.1-7.7%. The portion of PCDDs represented 62.4-86.9% of total PCDDs/PCDFs. In the TEQ concentration 1, 2, 3, 4, 7, 8-PeCDF concentration represented 22.7-35.6 % of total TEQ concentration.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1499-1504
• /
• 2004

Flue gas recirculation (FGR) is a method used to control oxides of nitrogen ($NO_x$) in combustion system. The recirculated flue gases resulted in slow reaction and low flame temperatures, which in turn resulted in decreased thermal NO production. Recently, it has been demonstrated that introducing the recirculated flue gas in the fuel stream, that is, the fuel induced recirculation (FIR), resulted in a much greater reduction in $NO_x$ per unit mass of recirculated gas, as compared to introducing the flue gases in air. In the present study, the effect on $NO_x$ reduction in turbulent swirl flame in laboratory scale using FGR/FIR methods through the dilution using $N_2$ and $CO_2$. Results. show the $CO_2$ dilution is more effective $NO_x$ reduction methods because of large temperature drop due to the larger specific heat $CO_2$ compared to $N_2$. FIR is more effective to reduce $NO_x$ emission than FGR when the same recirculation ratio of dilution gas.

• International Journal of Oral Biology
• /
• v.46 no.2
• /
• pp.94-97
• /
• 2021

The purpose of this study was to introduce a new in vitro method for evaluating the antimicrobial activity of toothpaste, reflecting the actual toothbrushing time and the dilution of toothpaste by salivation. We designed three experimental groups and one negative control group. The experimental groups were (1) 90 μL of toothpaste + 10 μL 1X phosphate-buffered saline (PBS, 9/10 dilution group), (2) 50 μL of toothpaste + 40 μL 1X PBS (1/2 dilution group), and (3) 25 μL of toothpaste + 65 μL 1X PBS (1/4 dilution group). During toothbrushing, saliva is continuously secreted into the oral cavity and the toothpaste concentration is diluted over time during toothbrushing. Therefore, the 1/2 and 1/4 dilution experimental groups were added. The negative control group was toothpaste diluted 20,000-fold with 1X PBS. Miracle Fresh Doctor toothpaste and Streptococcus mitis KCOM 1350, Prevotella intermedia KCOM 1107, Fusobacterium nucleatum subsp. polymorphum KCOM 1322, and Aggregatibacter actinomycetemcomitans KCOM 1306 were used as the toothpaste and target bacterial strains, respectively. The number of bacterial cells plated on agar plates in the negative control group was 1,000 CFU. If the number of colonies on the experimental group plate was less than one, the treatment was considered to have > 99.9% bactericidal activity. These results suggest that this new in vitro method for antimicrobial evaluation could be used as the standard method for testing the antimicrobial activity of toothpaste.