• Korean Journal of Animal Reproduction
• /
• v.20 no.2
• /
• pp.101-109
• /
• 1996

This study was done to find out the methods of long-term use of liquid boar semen in 100 ml plastic bottle for artificial insemination and to investigate differences between Lactose-Egg yolk and Biitschwiler diluents according to storage temperature, and effect of final glycerol concent ration in Lactose-Egg yolk diluent. Liquid boar semen diluted with Lactose-Egg yolk diluent showed significantly higher sperm motility (p<0.05) after 0.5 and 2h incubation at 37$^{\circ}C$,than Butschwiler diluent at all storage length when it was preserved in the 5$^{\circ}C$ refrigerator. The NAR acrosome in Lactose-Egg yolk diluent a after 0.5 and 2h incubation at 37$^{\circ}C$, respectively, during preservation periods was similar to that in Biitschwiler diluent. When liquid boar semen was preserved at 15$^{\circ}C$, liquid boar semen in the Butschwiler diluent showed significantly higher percentages of sperm motility and NAR acrosome from third day to seventh than that in Lactose-Egg yolk diluent. In the effect of final glycerol concentration of liquid boar semen in the Lactose-Egg yolk diluent, the final glycerol concentration of 2% showed higer percentages of sperm motility and NAR acrosome than that of 0, 1, 3, and 5%. Farrowing rate, litter size and average pig weight at birth did not differ significantly between Lactose-Egg yolk and But schwiler diluents. As a result of this study, we found out that liquid boar semen can be stored for 6-7 days at 5$^{\circ}C$ in Lactose-Egg yolk diluent and at 15$^{\circ}C$ in Butschwiler diluent.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.238-243
• /
• 2005

Succinic acid has recently been drawing much interest as a raw material for biodegradable polymer. In this study acetic acid was removed by reactive extraction with various amines dissolved in various diluents. Distribution coefficients were determined as the kind of amines, diluents, and pHs of continuous phase. The extraction capacity increased with the polarity of diluent and the decrease of pH from the artificial binary solution. Based on the different extractability for succinic acid and acetic acid from the artificial binary solution, the removal of acetic acid from fermentation broth was investigated using various amines and diluents. In addition, the extractability and selectivity of CLA for succinic acid and acetic acid from fermentation broth were higher than that of straight solvent extraction.

• Journal of Environmental Health Sciences
• /
• v.19 no.2
• /
• pp.40-45
• /
• 1993

A solvent extraction system of copper-thiocyanate complex into various types of alkylamines such as secondary, tertiary and quaternary ammonium salt for the determination of trace copper by atomic absorption spectrometry is presented. The maximum extraction of copper shows at 0.1 M-thiocyanate and single extraction with 10 ml of 1% amine-MIBK from 50 ml of aqueous solution is enough to be quantitative for micro amounts of copper. The effect of amine diluents and of diverse ions are also examined.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.520-523
• /
• 2003

We used three types of reactive diluents with different chemical structures, N-vinyl-pyrrollidone(NVP), ethyl hexyl acrylate(EHA) and hydroxyehtyl methacrylate(HEMA). It was founded that N-vinylpyrrollidone(NVP) and ethyl hexyl acrylate(EHA) based PUA with low molecular weight polypropylene glycol(PPG) at low oligomer content give high diffraction efficiency. The morphology of the resultant gratings was analyzed by using scanning electron microscopy(SEM) and Tg of the polymer matrix by dynamic mechanical thermal analysis(DMTA).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.38-41
• /
• 2001

The combustion characteristics of the disilicides molybdenum system have been studied experimentally. The pertinent reaction parameters that control self-propagating high temperature synthesis reactions have been examined. These include reactant particle size, powder mixing and compaction, reaction stoichiometry, diluents. The influence of experimental variables on integrity, uniformity, structure, and related material properties will be discussed. Formation mechanism of $MoSi_2$ during SHS might be different and depending on experimental conditions.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.213-216
• /
• 1996

The relationship between the chemical structure and properties of UV-cured polyurethane acrylate films has been investigated. Studies have been made on the effects of the molecular weight of polyol, the types of polyol and diluents on the properties such as tensile properties and thermal properties. The glass transition temperature decreased with increasing the molecular weight of polyol. However storage modulus increased by using the diluent containing rigid structure and multifunctional acrylate monomers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.38-41
• /
• 2001

The combustion characteristics of the disilicides molybdenum system have been studied experimentally. The pertinent reaction parameters that control self-propagating high temperature synthesis reactions have been examined. These include reactant particle size, powder mixing and compaction, reaction stoichiometry, diluents. The inf1uence of experimental variables on integrity, uniformity, structure, and related material properties will be discussed. Formation mechanism of MoSi$_2$ during SHS might be different and depending on experimental conditions.

• Korean Journal of Clinical Pharmacy
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2001

Omeprazole is usually administered as encapsulated enteric-coated granules and enteric-coated tablets because of its acid-labile nature. For children and patients who can not swallow, it can be mixed with water or other liquid after a capsule is opened or a tablet is crushed. This study was performed to compare omeprazole liquid formulations of tablet and capsule Omeprazole 20 mg capsule containing enteric coated granules was opened and 20 mg entric-coated tablet was ground to be mixed with sodium bicarbonate solution, orange juice or water. Each liquid formulation was poured into dissolution tester, mixed with first solution (artificial gastric juice; pH 1.2) for two hours, then with second solution (artifical enteric juice; pH 6.8) for thirty minutes. pH was measured periodically for two and half hours. Samples were drawn periodically, mixed with lansoprazole as an internal standard, and injected to HPLC. As results, pH of sodium bicarbonate solution of omeprazole was significantly higher than that of orange juice or water in first solution (6.2-7.4 vs. 1.2, p<0.005). At 150 min, concentrations of omeprazole in three diluents with granules and in sodium bicarbonate solution of tablet powder sustained significantly higher than in other solution of tablet powder (p<0.001). In conclusion, enteric-coated granules from capsule with three diluents and powder from tablet in sodium bicarbonate solution was stable during dissolution test, which would be appropriate and recommended for patient who can not swallow solid preparations.

• Membrane Journal
• /
• v.24 no.2
• /
• pp.158-166
• /
• 2014

In this research, microporous and bicontinuous poly vinylidene fluoride(PVDF) hollow fiber membranes were prepared via hybrid process of the thermally induced phase separation (TIPS) and stretching method. The mechanism of the membrane preparation is based on liquid-liquid phase separation. The final membranes have characteristic structures which have both bicontinuous and fibrillar morphology by applying the stretching method. They showed quite different structure when compared with the spherulitic or nodular structure from S/L TIPS and bicontinuous structure from L/L TIPS. At first, PVDF hollow fiber precursors were prepared via TIPS method using various kind of diluent mixtures. We used gamma-butyrolacton, dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP) as diluents. We could make hollow fiber membranes which had porous outer surface or dense outer surface by controling the parameters such as cooling conditions, PVDF concentration and the ratio of diluent mixtures. Finally, these hollow fiber were stretched at room temperature and diluents were extracted by ethanol. Effects of the stretching ratio on the membrane morphology were investigated using scanning electron microscope (SEM), and its effects on water flux, porosity, pore size, roughness and tensile strength were examined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1458-1464
• /
• 2002

$CO_2$ is well known greenhouse gas which is the major source of global warming. Reducing $CO_2$ emission in combustion process can be achieved by increasing combustion efficiency, oxygen enriched combustion and recirculation of the emitted $CO_2$ gas. Stability of non-premixed flame in oxygen enriched environment will be affected by the amount of oxygen, kind of diluents and fuel exit velocity. The effects of these parameters on flame liftoff and blowout are studied experimentally oxidizer coflowing burner. Experiments were divided into three cases according as where $CO_2$gas was supplied. - 1) to coflowing air, 2) to fuel with 0$_2$-$N_2$ coflow, 3) to coflowing oxygen. Flame in air coflowing case was lifted in turbulent region. Flame lift and blowout in laminar region with the increase in $CO_2$ volume fraction in $CO_2$-Air mixture makes flame lift and blowout in laminar region. Increase in oxygen volume fraction makes flame stable-i.e. flame liftoff and blowout occur at higher fuel flowrates. Liftoff height was non-linear function of nozzle exit velocity and affected by the $O_2$ volume fraction. It was found that the flame in $O_2$-$N_2$ coflow case was more stable than $O_2$-$CO_2$ case, Liftoff heights vs (nozzle exit velocity/laminar burning velocity)$^{3.8}$ has a good correlation in $O_2$-$CO_2$ oxidizer case.