• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.184-193
• /
• 2015

In this study, dye encapsulated microcapsules were produced by polyurethane prepolymer synthesis method using hexamethylene diisocyanate, ethylene glycol and methyl ethyl ketone. The study showed that the average size of microcapsules were $4.697{\mu}m$ in normal distribution. These microcapsules were induced red color by thermochromic fluoran red dye with showing color change as temperature. After the textile finishing of microcapsules, durability of microcapsules were checked as crocking times and lightfastness. The microcapsules were pressed at protrusion of textile weave in 10 crocking times which meant that the microcapsules not fallen off. Lightfastness was acceptable giving rating 4. It means that the polyurethane microcapsules not affect to light durability.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.60-66
• /
• 1993

Aqueous polyurethane(PU) anionomer dispersions were prepared from isophorone diisocyanate (IPDI), polytetramethylene adipate glycol(PTAd) and dimethylol propionic acid(DMPA) as potential anionic centers. The effects of polyol molecular weight(Mn) on the state of dispersion, thermal, mechanical, and viscoelastic properties and swelling of emulsion cast film were determined. With increasing Mn of PTAd, particle size of emulsion and soft segment T$_{g}$ decreased, and solvent swell, emulsion viscosity, and hard segment $T_{g}$ increased. Tensile strength showed minimum with PTAd 1000, and elongation at break generally increased with the Mn of PTAd. These results were possibly nterpreted in terms of soft segment-hard segment phase separation and crystallization of high molecular weight PTAd.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2408-2413
• /
• 2012

Effects of stanous catalyst on the cross-linking reaction characteristics of multi-functional fluoropolymer with blocked-hexamethylene diisocyanate(HMDI) were studied by dynamic DSC and non-isothermal thermogravimetric analysis (TGA). Results showed that cross-linking reaction occurred around $230-250^{\circ}C$ aftr the solvent and phenol, blocking agent, were removed upto the $150^{\circ}C$. It was considered that the reaction mechanism of the multi-functional fluoropolymer with HMDI might not be changed by the catalyst, however, the reaction rate became extremely faster upto to 100 times, showing the change of activation energy 81.8 kJ/mol for non-catalytic system to 61.7 kJ/mol for 1 phr catalytic system.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.1-7
• /
• 1999

Urethane-acrylate propelymers for secondary coating of optical fiber and high - performance material were prepared from the 4,4'-diphenylmethane diisocyanate(MDI), poly(tetramethylene oxide)glycol(PTMG, Mw 650 or 1000), 1,6-hexanediol(HD), 2-hydroxyethyl acrylate(HEA), and dibutyltin dilaurate as a catalyst. UV-Curable polyurethane acrylates were formulated from the urethane-acrylate prepolymers, three types of reactive diluents(DTs) having mono-, di-, and trifunctional-phenoxyethyl acrylate(PEA), hexanediol diacrylate(HDDA), and trimethylolpropane triacrylate(TMPTA), and 1-hydtoxycyclohexyl phenyl ketone(Irgacure 184) as a photoinitiator. The UV-cured films of polyurethane acrylates were obtained by curing using a medium-pressure mercury lamp(U W/cm, $\lambda_{max}=365\;nm)$. In this work, the effects of molecular weights of polyol and diol with low molecular weight into polymer chain on mechanical and dynamic mechanical properties of UV-cured polyurethane acrylates were studied. The structure and properties of the films obtained from the UV photopolymerization of urethane-acrylate prepolymer were investigated by FT-IR spectroscopy, dynamic mechanical measurement, tensile testing, and X-ray diffractometry.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.97-102
• /
• 2002

A series of waterbome poly(urethane-urea) anionomers were prepared from isophorone diisocyanate (IPDI), polycaprolactone diol (PCL), dimethylol propionic acid (DMPA), ethylene diamine (EDA), and triethylamine (TEA), NaOH, or Cu($(COOCH_3)_2$) as neutralizing agent. This study was performed to decide the effect of neutralizing agent type on the particle size viscosity, hydrogen bonding index, adhesive strength, antistaticity, antibacterial and mechanical properties. The particle size of the dispersions decreased in the following order: TEA based samples (T-sample), NaOH based samples (N-sample), and Cu($(COOCH_3)_2$) based sample (C-sample). The viscosity of the dispersions increased in the order of C-sample, N-sample, and T-sample. Metal salt based film samples Of and C-sample) had much higher antistaticity than TEA based sample. By infrared spectroscopy, it was found that the hydrogen bonding index (or fraction) of samples decreased in the order of T-sam-pie, N-sample, and C-sample. The adhesive strength and tensile modulus/strength decreased in the order of T-sample, N-sam-pie, and C-sample. The C-sample had strong antibacterial halo, however, T- and N-samples did not

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.21-26
• /
• 1996

Commercially available Chines oriental lacquer was treated to get two fractions, hexane soluble fraction and hexane insoluble fraction. Hexane soluble fraction was subjected to thermal curing process. Films obtained from the lacquer under normal conditions and obtained from thermal curing were compared. The compounds in hexane soluble fraction were copolymerized with 1,6-diisocyanohexane, and toluendiisocyanate(TDI). Films obtained by thermal curing were highly brittle and hydrophobic while the films obtained under normal conditions were hydrophilic. Curing reaction did not occur when oxygen was not available.Some of the major component in the lacquer was isolated by HPLC and UV spectrum of each compound was recorded.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.199-205
• /
• 2017

In this study, (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate acrylate was synthesized by reacting (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate with acrylic acid to minimize hardening shrinkage and to improve heat resistance, which are known as disadvantages of photopolymers for 3D printing application. Urethane acrylate was synthesized by reacting 1,3,5-triazine-2,4,6-triamino alcohol, 2-hexylethyl acrylate, and isophorone diisocyanate in order to improve the mechanical properties without deteriorating the heat resistance. The physical properties before and after the synthesis of the acrylate and the mechanical properties when the urethane acrylate was applied were investigated. The reaction progress of the composite was examined by FTIR and $^{13}C$ NMR. The heat deflection temperature, flexural strength, and surface hardness of the molding were measured. The curing behavior by Photo-DSC ultraviolet irradiation was also examined.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.81-85
• /
• 1999

Tributyl phyosphate(TBP) polypropylene glycol 4000(PPG-4000) and the mixture of two compounds were examined as a liquid membrane in a supported liquid membrane (SLM) to separate phenol from aqueous solution.The feed concentration of phenol was varied in a broad range from 500 mg/L to 5000 mg/L and different types of liquid membrane were prepared to elucidate their effects on separation of phenol. It was found that the modified PPG 4000 with TBP and toluene diisocyanate(TDI) might be used as a proper liquid membrane because the mass transfer rate examined with this membrane was higher than that through methyl isobutyl ketone (MIBK) which has been used as a conventional solvent in a solvent extraction process. The breakthrough pressure of the SLM is defined to be the pressure difference across the membrane at which the supported liquid membrane is not kept in the pores any more. it indicates how the SLM is stable., It was found that the breakthrough pressure of the modified PPG-4000 was much higher than those of typical organic solvents.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.3
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.424-430
• /
• 1976

Isocyanate-terminated SBR-prepolymers were prepared from SBR-diol and excess toluene diisocyanate. These prepolymers were then used as initiators for the sodium-catalyzed polymerization of ${\varepsilon}$-caprolactam. The resulting block copolymers, presumably the structure of nylon 6-SBR-nylon 6, were confirmed from their IR spectra. The viscosities of these polymers were measured in phenol/tetrachloroethane and the molecular weights were estimated. The polymerization reaction was not affected by the change in concentration of catalyst, but significantly faster at $185^{\circ}C$ than at $150^{\circ}C$. And the initiator concentration of 0.5 mole % gave good results.