• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.172-179
• /
• 2002

In this paper, an efficient reverse engineering method for free-formed surfaces is proposed based on the integration of a repetitive digitizing method and vision system. In recent reverse engineering process, the equi-interval digitization method is being used since the surface information is not known. If more accurate results are required, the number of measuring point should be increased appropriately. Thus, such measuring process tends to result in too dense data including useless information, and cause excessive measuring time. This problem can be improved by applying repetitive digitizing method and image process technique, which is proposed in this paper. The proposed methods are validated through appropriate simulation and experiments.

• 정보관리학회지
• /
• 제16권1호
• /
• pp.31-48
• /
• 1999

본 논문은 도서관 소장자료의 서지정보와 저작권이 있는 저작물, 사실정보, 인명정보의 디지털화와 관련한 저작권 문제를 검토하였다. 인터넷 상의 저작물 자체의 이용과 링크에 의한 저작물 이용과 관련한 문제점을 분석하였으며, 구축된 데이터베이스의 관내에서의 이용자 서비스와 관외의 이용자 요구에 응한 저작물 전송서비스와 관련된 법적 문제점도 조사하였다. 끝으로 현 상황 하에서 디지털도서관을 구현하기 위한 저작권 대책의 기본 방향을 제시하였다.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.677-682
• /
• 2007

In the distribution system, Change of system happens frequently. However, most of the relays are operated manually by a person or not changed when system changed. So, when fault happened, a case that relaydoes not act rapidly happens. Also, in current power system, digital relays are used because of digitization of relay. Digital relay has very many advantages than existing analog relay. One of these advantages is that communication is available and easily can make characteristic curve. If specific values are sent to a relay by communication, A relay can make suitable characteristic curve according to the value. In this paper, by using voltages and currents measured by relay, state of CB(Circuit Breaker) and these relays, SCADA(Supervisory Control And Data Acquisition) system that control and correct characteristic curve of overcurrent relay at system change by using HMI(Human Machine Interface) is proposed.

• 정보관리학회지
• /
• 제17권3호
• /
• pp.213-234
• /
• 2000

인쇄매체의 패러다임이 디지털 패러다임으로 바뀌면서 지식과 정보를 국가적인 차원에서 관리하기 위한 국가적인 전략이 요구되고 있다. 본 연구는 전략에 필요한 정보, 지식 및 지식정보의 이론적 틀, 왜 국가가 이들 자원을 관리하여야 하는가에 대한 관리의 문제점 및 해결방안 그리고 이들을 관리하기 위한 전략으로서 자원의 선정 등을 매크로적인 측면에서 제시하였다.

• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.232-236
• /
• 2017

A digital vacuum pressure sensor is designed, fabricated, and characterized using a packaged MEMS analog Pirani gauge. The packaged MEMS analog Pirani gauge requires a current source to heat up a heater in the Pirani gauge. To investigate the feasibility of digitization for the analog Pirani gauge, its implementation is performed with a zero-temperature coefficient current source and microcontroller that are commercially available. The measurement results using the digital vacuum pressure sensor showed that its operating range is 0.05-760 Torr, which is the same as the measurement results of the packaged MEMS analog pressure sensor. The results confirm that it is feasible to integrate the analog Pirani gauge with a commercially available current source and microcontroller. The successful hybrid integration of the analog Pirani gauge and digital circuits is an encouraging result for monolithic integration with a precision current source and ADCs in the state of CMOS dies.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.439-440
• /
• 2008

A high-speed DCO is proposed that uses the negative-skewed delay scheme. The DCO consists of a ring of inverters with each PMOS transistor driven from the output of 3 earlier stage through a set of minimum-sized pass-transistors. The digitization of negative-skewed delay is achieved by selecting pass-transistors turned on and digitizing the gate voltages of the selected pass-transistors. The proposed 7-stage DCO has been simulated using 1.8V, $0.18\;{\mu}m$ TSMC CMOS process to obtain a resolution of 3ps and an operation range of 2.88-5.03GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.153.6-153
• /
• 2001

3-Dimentional 3D digitization of the human is a technology that is still relatively new. There are present uses such as radiotherapy, identification systems and commercial uses and potential future applications. In this paper, we analyzed and experimented to determine the easiest and most efficient method, which would give us the most accurate results. We also constructed a database of realistic expressions and high quality human heads. We scanned people´s heads and facial expressions in 3D using a Minolta Vivid 700 scanner, then edited the models obtained on a Silicon Graphics workstation. Research was done into the present and potential uses of the 3D digitized models of the human head and we develop ideas for ...

• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.5-14
• /
• 1995

An optical measurement method of three dimensional surface profiles which is named the slit beam projection is suggested and practically implemented. This method is intended especially for noncontact and fast digitization of sculptured surfaces for CAD modeling and die manufacturing. Its basic principles are based on geometric optics. Deatiled optical principles and an sub-pixel image processing technique to enhance the measuring resolutions are described in this study. The measuring performances of the slit beam projection are presented and discussed to demonstrate that an actual measuring accuracy of below .+-. 0.2mm can be achived over the whole measuring range(500mm*300mm*200mm)

• 지식경영연구
• /
• 제18권3호
• /
• pp.201-230
• /
• 2017

It is argued that the strategy practice in the 21st digital organization is limited and constrained in that it is being laregy driven by a traditional positivistic strategic management thinking. This article, drawing upon the models and concepts developed in the field of general ecology, proposes a resilient ecological view of strategy, as an alternative strategy frame of reference for overcoming some of the pitfalls and shortcomings of the current digital strategy practice in the organization. The implications of this new ecological perspective on strategy practice are discussed in detail. The article concludes with discussions and directions for implanting the perspective in the organization.

• Management Science and Financial Engineering
• /
• 제11권3호
• /
• pp.47-60
• /
• 2005

Well-known e-CRM strategy is to focus on profitable customers and pay less attention to unprofitable ones. Moreover, some researchers recommend not serving unprofitable ones any more. However, it often neglects customers indirect value. Deselecting unprofitable customers can raise the issue of bad word-of-mouth publicity especially in the age of the Internet. Some studies pointed out that a customers decision to buy a product or service is often strongly influenced by others. In this paper, we consider customers' word-of-mouth effect on quality learning of inexperienced customers. We show that firms implementing e-CRM must take the effect into the consideration when deselecting unprofitable customers.