• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.209-210
• /
• 2019

본 논문은 해상 원격의료진료 시스템 구현을 위한 통신모듈에 관한 내용이다. 해상에서 실시간 원거리 영상통신 및 원격제어를 통한 의료서비스을 구현하기 위한 통신 시스템을 디지털 회로로 구현하였으며 이에 대한 회로구조 및 통신 방법등에 대해 발표하고자 한다.

• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.34-37
• /
• 2015

An ideal teaching-learning method, such as the blended learning method, is to motivate interests in education and to allow active class participation of students. Students exposed to this method are hypothesized to be dedicated in learning and their school life. A research was conducted on $11^{th}$ graders in Daejeon city high school specialized in industry; the blended learning method was applied to a course, digital logic circuit and the effects on the students' learning were monitored. The result shows that compared with a common leaning method, the blended learning method is very effective in terms of increasing educational interest, class participation, the level of concentration in class and academic achievement of students. Also, it shows positive feedbacks from the students on the educational videos and the usage of the contents. Conclusively, the blended learning method effectively increases academic achievements through improved educational motivation and active class participation which positively affect the overall satisfaction of participants.

• 대한전기학회논문지
• /
• 제37권2호
• /
• pp.80-88
• /
• 1988

As a method to improve harmonics in the voltage source PWM inverter, 5 level stair case wave method is used. The complementary transistor inverter (CTI) bridge circuit has this characteristics. This circuit required synchronous type 3 level PWM signal. In this paper, the 3 phase PWM digital signals within about 10 modulation error of the natural sampling was caculated, and a ROM table out of it for the digital signal of the control system was made. According to this table, the digital control method was proposed, and DTI circuit operated by this method was reviewed. It was confirmed to make V/F control possible by the select modulation ratio to the frequency.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.923-928
• /
• 1986

This paper describes the design and fabrication of a high performance digital tuning analog component integrated circuit that contains a television station detector and decoders(H and L types). When the comparator level sampling method is used, this integrated circuit can be used as a stable channel selector for an external circuit with very large signal variation. It has been fabricated using the SST bipolar standard process and its chip size is 2.2x2.1mm\ulcorner As a result, we have succeeded in fabricating the IC that satisfies the D.C characteristics, and the channel station detector and decoder function.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.747-753
• /
• 1986

This paper describes the design and fabrication of a digital volume control integrated circuit which replaces a mechanical volume control. The integrated circuit can be controlled volume by up/down switch. It has been fabricated by SST bipolar standard process. Its chip size is 2.5x2.5 mm\ulcorner As a result, we succeeded in fabrication of integrated circuit which satisfied DC characteristics and proper operation of volume control.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.403-411
• /
• 2020

기존에 진성난수 생성기를 위한 베타선 센서 회로의 아날로그 회로와 비교기 회로에 사용되는 파워와 그라운드 라인은 서로 공유하므로 비교기 회로의 디지털 스위칭에 의해 발생되는 파워와 그라운드 라인에서의 전압강하가 CSA를 포함한 아날로그 회로의 출력 신호 전압이 감소하는 원인이었다. 그래서 본 논문에서는 디지털 스위칭 노이즈의 source인 비교기 회로에 사용되는 파워와 그라운드 라인을 아날로그 회로의 파워와 그라운드 라인과 분리하므로 CSA(Charge Sensitive Amplifier) 회로를 포함한 아날로그 회로의 출력신호전압이 감소되는 것을 줄였다. 그리고 VREF(=1.195V) 전압을 VREF_VCOM과 VREF_VTHR 전압으로 변환해주는 전압-전압 변환기 회로는 PMOS current mirror를 통해 IREF를 구동할 때 PMOS current mirror의 드레인 전압이 다른 경우 5.5V의 고전압 VDD에서 channel length modulation effect에 의해 각각의 current mirror를 통해 흐르는 구동 전류가 달라져서 VREF_VCOM과 VREF_VTHR 전압이 감소하는 문제가 있다. 그래서 본 논문에서는 전압-전압 변환기 회로의 PMOS current mirror에 PMOS 다이오드를 추가하므로 5.5V의 고전압에서 VREF_VCOM과 VREF_VTHR의 전압이 down되지 않도록 하였다.

• 전기의세계
• /
• 제26권6호
• /
• pp.41-47
• /
• 1977

The paper deals with the fundamental specification for the physical implementation of interface circuit, which will play an important role in information and signal trammission between computer and controlled system, and also we have proved that the digital contoller will be able to improve the data handling of interface circuit.

• Journal of Radiation Protection and Research
• /
• 제20권2호
• /
• pp.85-95
• /
• 1995

GM 계수관을 방사선 검출기로서 사용하고, 검출기의 신호를 디지탈 펄스로 변환하는 펄스처리회로와 디지탈 통신방식의 하나인 FSK(frequency shift keying) 변복조회로를 설계하였으며, 휴대용 무전기로 송수신되는 방사선 검출신호를 방사선량과 방사선량율로 개인용 컴퓨터의 화면에 표시하는 단일채널 무선 방사선측정 시스템을 개발하고 성능을 평가하였다. 성능검증 실험에서 펄스를 입력한 경우와 검출기에 방사선을 조사시킨 경우 펄스처리회로에서 약 5V의 동일한 디지탈 펄스가 출력되었고, 무선통신계통에서도 입력과 출력이 왜곡없이 송수신되고 있음을 확인하였다. 검출기에 표준방사선원(Cs-137)으로 방사선을 조사시켜 선량률을 측정한 결과 측정오차는 조사된 선량률의 10% 이내를 나타내었다. 본 시스템은 국내에선 처음으로 설계되었으며, 향후 다중채널로 구성하여 실시간 개인방사선피폭선량계, 방사선감시기 등 여러 용도의 방사선측정기에 응용함으로써 방사선방어에 기여할 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.609-611
• /
• 1996

Zero-Cross Detector makes pilot signal to control the power to CEDM(Control Element Drive Mechanism). Existing Zero-Cross Detectors has had a problem which can cause unexpected reactor trip resulted from fluctuating frequency of input signal coming from M/G Set. The existing Zero-Cross Detector can't work properly when power frequency is varying because it was designed to work under stable M/G Set operation, and produces wrong pilot signal and output voltage. In this report the Zero-Cross Detector is improved to resolve voltage fluctuating problem by using new devices such as digital noise filtering circuit, variable cycle compensator and alarm circuit. And through the performance verification it shows that new circuit is better than old one. If suggested detector is applied to plant, it is possible to use it under House Load Operation because stable voltage can be generated by new Zero-Cross Detector.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.455-462
• /
• 2004

This paper is concerned with the implementation of the active vibration suppression controller using analog circuit and microprocessor. The target active vibration controller is the positive position feedback(PPF) controller since it provides a simple algorithm suitable for both analog circuit and digital controllers. In this study, the analog PPF controller is realized using an operational amplifier and the digital PPF controller is realized using a low-cost micro-controller. The circuit diagrams are explained in detail. We then discuss the advantages and disadvantages of both methods from the view of practical implementation. Experimental results show that both implementation methods can be effectively used for the active vibration control but need to be chosen based on the mission objective.