• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1059-1068
• /
• 2003

Geographic Information System (GIS) combined with Universal Soil Loss Equation (USLE) was used to estimate the soil erosion of Asan Bay experiment watershed in Korea. Spatial data for each USLE factors were obtained from the Landsat-5 TM remote sensing images and 1/25,000 scale digital contour maps. Sediment yield to Asan Bay was estimated by the sediment delivery ratio and trap efficiency. The estimated sediment yield was compared with observed on the Asan and Sapgyo estuary sub-watershed within Asan Bay experimental watershed for the period from 1981 to 2000. The calculated total annual sediment yields from Asan and Sapgyo estuary sub-watershed to Asan Bay were 5,665tonnes/yr and 6,766tonnes/yr, respectively. The measured sediment yields were 12,937tonnes/yr and 12,395tonnes/yr, respectively on an average.

• Composites Research
• /
• v.18 no.6
• /
• pp.26-33
• /
• 2005

The mechanical properties of composite materials may severely degrade in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause considerable damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PVDF(polyvinylidene fluoride) film sensors were used for monitoring high-velocity impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research shows how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composite.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.158-164
• /
• 1999

This paper investigated and evaluated the NASA's Shuttle Imaging Radar-C (SIR-C) multiple frequency SAR data for differential backscattering effects of microwave from the surface geological materials overlying the skarn type mineralization. Although an integrated approach in mineral exploration is more cost effective and is well in use, there are still many technical and scientific issues to be further investigated and researched. In this study we have reprocessed several sets of previously surveyed exploration data and experimented with fuzzy logic digital fusion of the preprocessed data with respect to chosen exploration targets. Among the numerous fuzzy logic operators, which are currently available for a data driven integrated exploration strategy, we used varying combinations of fuzzy MIN, fuzzy MAX, and fuzzy SUM operators along with Gamma operator for fusion of exploration data, including the contact metamorphic zone information. The final exploration target tested was a skarn type W-Mo-F mineralization in the study area. The fuzzy logic derived mineral potential anomaly almost exactly matched the differential backscattering anomalies on the C-band and L-band SIR_C data when overlaid on each other. Although this high degree of correlation between these two data sets is remarkable, the differential backscattering anomaly over the skarn type W-Mo-F mineralization in the study area requires further investigation.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.262-266
• /
• 1999

Several commercial companies that plan to provide improved panchromatic and/or multi-spectral remote sensor data in the near future are suggesting that merge datasets will be of significant value. This study evaluated the utility of one major merging process-process components analysis and its inverse. The 6 bands of 30$\times$30m Landsat TM data and the 10$\times$l0m SPOT panchromatic data were used to create a new 10$\times$10m merged data file. For the image classification, 6 bands that is 1st, 2nd, 3rd, 4th, 5th and 7th band may be used in conjunction with supervised classification algorithms except band 6. One of the 7 bands is Band 6 that records thermal IR energy and is rarely used because of its coarse spatial resolution (120m) except being employed in thermal mapping. Because SPOT panchromatic has high resolution it makes 10$\times$10m SPOT panchromatic data be used to classify for the detailed classification. SPOT as the Landsat has acquired hundreds of thousands of images in digital format that are commercially available and are used by scientists in different fields. After the merged, the classifications used supervised classification and neural network. The method of the supervised classification is what used parallelepiped and/or minimum distance and MLC(Maximum Likelihood Classification) The back-propagation in the multi-layer perception is one of the neural network. The used method in this paper is MLC(Maximum Likelihood Classification) of the supervised classification and the back-propagation of the neural network. Later in this research SPOT systems and images are compared with these classification. A comparative analysis of the classifications from the TM and merged SPOT/TM datasets will be resulted in some conclusions.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.453-464
• /
• 2006

Web camera is usually used for video communication between PC, it has small sensing area, cannot using long exposure application, so that is insufficient for astronomical application. But web camera is suitable for bright planet, moon, it doesn't need long exposure time. So many amateur astronomer using web camera for planetary imaging. We used ToUcam manufactured by Phillips for planetary imaging and Registax commercial program for a video file combining. And then, we are measure a property of web camera, such as linearity, gain that is usually using for analysis of CCD performance. Because of using combine technic selected high quality image from video frame, this method on take higher resolution planetary imaging than one shot image by film, digital camera and CCD. We describe a planetary observing method and a video frame combine method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.96-96
• /
• 2001

The aim of this study was to find out and confirm the project formulation, feasibility, scale and locations on the farmland development projects such as planned and ongoing tideland reclamation and irrigation facilities along the western coast of North Korea using satellite image data, Landsat TM, JERS OPS and SPOT PAN and aged maps. In order to apply to the study, remote sensing technologies such as geometric correction. digital mosaicking, image merging, linear extraction and land cover classification were studied. As the results of the study, the reclaimable tidal flats are recognized at about 178,000 ha equivalent to 59% of announced 300,000ha. and 16,000 ha of completed, 17,000 ha of ongoing project areas although 27,000 ha were revealed to be completed during 1987-1993. Almost planned projects are appeared to be shortage of water supply due to their small watersheds, however, most projects are connected with 2000 mile canal system.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.133-139
• /
• 2003

The purpose of this study is the analyses of the relationship between geology and terrain/satellite image in the southern part of the Bandung, Indonesia to provide basic information fur geological survey. For this, topography, geology and satellite image were constructed to spatial database. Digital elevation, slope, aspect, curvature, hill shade of topography were calculated from the topographic database and lithology was imported from the geologi-cal database. Lineament, lineament density, and NDVI were extracted the Landsat TM satellite image. The results showed the close relationship between geology and terrain and satellited image. Each sedimentary rocks seldom correspond with geology and analyses of topography but as a whole fur sedimentary rocks coincide with them. Tuff and volcanic breccia in the volcanic rocks correspond with the result of terrain analyses. Talus deposit is well matched with the analyses of topography/satellite image.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.459-467
• /
• 1997

In order to examine the primary trends and characteristics of geological lineaments along the southwestern boundary of Okcheon zone, we carried out the analysis of geological lineament trends over six selected sub-areas using Landsat-5 TM images and digital elevation model. The trends of lineaments is determined by a minimum variance method, and the resulting geological lineament map can be obtained through generalized Hough transform. We have corrected look direction biases reduces the interpretability of remotely sensed image. An approach of histogram modification is also adopted to extract drainage pattern specifically in alluvial plains. The lineament extracting method adopted in this study is very effective to analyze geological lineaments, and that helps estimate geological trends associated various with the tectonic events. In six sub-areas, the general trends of lineaments are characterized NW, NNW, NS-NNE, and NE directions. NW trends in Cretaceous volcanic rocks and Jurassic granite areas may represent tension joints that developed by rejuvenated end of the Early Cretaceous left-lateral strike-slip motion along the Honam Shear Zone, while NE and NS-NNE trends correspond to fault directions which are parallel to the above Shear Zone. NE and NW trends in Granitic Gneiss are parallel to the direction of schitosity, and NS-NNE and NE trends are interpreted the lineation by compressive force which acted by right-lateral strike-slip fault from late Triassic to Jurassic. And in foliated Granite, NE and NNE trends are coincided with directions of ductile foliation and Honam Shear Zone, and NW-NNW trends may be interpreted direction of another compressional foliation (Triassic to Early Jurassic) or end of the Early Cretaceous tensional joints. We interpreted NS-NNE direction lineation is related with the rejuvenated Chugaryung Fault System.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.95-100
• /
• 2004

This paper represents the development of a CLS(Control Loading System) for a target a airplane (KT-1) with mechanical linkage reversible flight control system. The system is composed of mechanical frame, controller, sensing part to measure the force from the stick, driving system generating the reaction forces. The DS1103 DSP(Digital Signal Processor) of the dSpace Corp. was used as the controller. The control algorithm of the CLS and the operational environment including monitoring software and evaluation tools are described. The evaluation of the system was conducted according to the requirement specification. The results of the test were analyzed by comparing with the actual data of the target airplane.