• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.151-156
• /
• 2018

Because of its large differences in writing style, context-independency and high recognition accuracy requirement, free handwritten digital identification is still a very difficult problem. Analyzing the characteristic of handwritten digits, this paper proposes a new handwritten digital identification method based on combining structural features. Given a handwritten digit, a variety of structural features of the digit including end points, bifurcation points, horizontal lines and so on are identified automatically and robustly by a proposed extended structural features identification algorithm and a decision tree based on those structural features are constructed to support automatic recognition of the handwritten digit. Experimental result demonstrates that the proposed method is superior to other general methods in recognition rate and robustness.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2014

This paper suggested a theoretical approach and an implementation for the design of an unequal Wilkinson power divider with a high dividing ratio operating at two-frequencies. The T-section transmission lines and the two-section of Monzon's theory are proposed to operate a dual-band application. To achieve the high dividing ratio divider, the high impedance line using a T-shaped structure and low impedance lines with periodic shunt open stubs are implemented. For the validation of this divider, a dual-band power divider with a high dividing ratio of 5 is simulated and measured at 1 GHz and 2 GHz. The measured performances of the divider are in good agreements with simulation results.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1014-1024
• /
• 1998

This paper describes the implementation of the asymmetric digital subscriber lines(ADSL) interface device function in ATM networks. The function of the ADSL interface devices has been achieved within a type of the ATM switch standard board. The board connected with the ADSL modem process the ATM physical layer function of data transfering asymmetrically. For the implementation of the board, we have modeled a worst case of the subscriber line conditions from the existing investigated results on the impairments such as crosstalk, impulse noise, and some important noises loaded to subscrber line. Also we have performed assessment tests in the full test environments. We have found that the board is met to the standard specification in condition with various test loops and the worst line conditions using an ADLS line simulator. And we confirmed that high-speed multimedia services are performed well with the ATM switch and the ADSL subscriber line. It is evaluted that this board can be used for high quality ADSL services through existed copper subscriber line.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.379-388
• /
• 2007

This paper presents a real-time respiration and heartbeat detector comprised of a 1.6 GHz single-channel Doppler sensor and analog/digital signal processing block for remote vital sign detection. The RF front end of the Doppler sensor consists of an oscillator, mixer, low noise amplifier, branch-line hybrid and patch antenna. We apply artificial transmission lines(ATLs) to the branch-line hybrid, which leads to a size reduction of 40 % in the hybrid, while its performance is very comparable to that of a conventional hybrid. The analog signal conditioning block is implemented using second order Sallen-Key active filters and the digital signal processing block is realized with a LabVIEW program on a computer. The respiration and heartbeat detection is demonstrated at a distance of 50 cm using the developed system.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.2
• /
• pp.138-147
• /
• 2014

In manufacturing companies, different types of production have been developed based on diverse production strategies and differentiated technologies. The production systems have become smart, factories are filled with unmanned manufacturing lines, and sustainable manufacturing technologies are under development. Nowadays, the digital manufacturing technology is being adopted and used in manufacturing industries. When this technology is applied, a lot of efforts, time and cost are required and training professionals in-house is limited. In this paper, we introduce e-FEED system (electronic based Front End Engineering and Design) that is the integrated design and analysis system for optimized manufacturing line development on virtual environment. This system provides the functions that can be designed easily using library and template based on standardized modules and analyzed automatically the logistic and capacity simulation by one-click and verified the result using visual reports. Also, we can review the factory layout using automatically created 3D virtual factory and increase the knowledge reuse by e-FEED system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.117-125
• /
• 2012

Although many studies have been conducted to extract buildings from airborne lidar data, most of them assume that all the boundaries of a building are straight line segments. This makes it difficult to model building boundaries containing curved segments correctly. This paper aims to model buildings containing curved segments as combination of straight lines and arcs. First, two sets of boundary points are extracted by adaptive convex hull algorithm and local convex hull algorithm with a larger radius. Then, arc segments are determined by average spacing of boundary points and intersection ratio of perpendicular lines. Finally, building boundary is modeled through regularization of least squares line or circle fitting. The experimental results showed that the proposed method can model the curved building boundaries as arc segments correctly by completeness of 69% and correctness of 100%. The approach will be utilized effectively to create automatically digital map that meets the conditions of the Korean digital mapping.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73.2-73.2
• /
• 2011

We present a new database of absorption and emission-line measurements based on the entire spectral atlas from the Sloan Digital Sky Survey (SDSS) 7th data release of galaxies within a redshift of 0.2. Our work makes use of the publicly available penalized pixel-fitting(pPXF) and gas and absorption line fitting (gandalf) IDL codes, aiming to improve the existing measurements for stellar kinematics, the strength of various absorption-line features, and the flux and width of the emissions from different species of ionized gas. Our fit to the stellar continuum uses both standard stellar population models and empirical templates obtained by combining a large number of stellar spectra in order to fit a subsample of high-quality SDSS spectra for quiescent galaxies. Furthermore, our fit to the nebular spectrum includes an exhaustive list of both recombination and forbidden lines. Foreground Galactic extinction is implicitly treated in our models, whereas reddening in the SDSS galaxies is included in the form of a simple dust screen component affecting the entire spectrum that is accompanied by a second reddening component affecting only the ionised gas emission. Most notable of our work is that, we provide quality of the fit to assess reliability of the measurements. The quality assessment can be highly effective for finding new classes of objects. For example, based on the quality assessment around the Ha and [NII] nebular lines, we found approximately 1% of the SDSS spectra which classified as "galaxies" by the SDSS pipeline are in fact type I Seyfert AGN.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.41-49
• /
• 2012

This paper proposes a detection method of wipes including horizontal wipes with linear moving borders, such as horizontal or vertical wipes, Barn Doors, and Iris Rounds with circular moving borders. The suggested method first obtains a difference image between two adjacent frames, and extracts lines and circles by applying Hough transformation to the extracted difference image. Then, we detect wipe transitions by employing an evaluation function that analyzes the number of moving trajectories of lines or circles, their moving direction and magnitude. To evaluate the performance of the suggested algorithm, experimental results show that the proposed method can effectively detect wipe transitions with linear and circular moving borders rather than some existing methods.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.337-342
• /
• 2018

This study was started to study the artistic aesthetic value of the antique artwork which is gradually declining in the field of metal crafts. The aesthetic interpretation of the lines and faces that have been identified through previous researches has been defined as a vitality and repetitive beauty. The researchers here have tried to express the formative works which can be repeated and change. As a result, it was found that the object of inquiry which can express the aesthetic beauty felt in the simple change of the line and the face is possible without the advanced technique of the difficult technique or the molding method through the natural and gradual change of the line and the face rather than the regular repetition. Through this study, it was found that the use of future lines and surfaces could be utilized as a variety of aesthetic expression methods as molding elements.

• International Journal of Contents
• /
• v.5 no.3
• /
• pp.50-56
• /
• 2009

Internet is being used for several activities by a great range of users. These activities include communication, e-commerce, education, and entertainment. Users are required to register regarding website in order to enroll web activities. However, registration can be done by automated hacking software. That software make false enrollments which occupy the resources of the website by reducing the performance and efficiency of servers, even stop the entire web service. It is crucial for the websites to have a system which has the capability of differing human users and computer programs in reading images of text. Completely Automated Public Turing Test to Tell Computers and Human Apart (CAPTCHA) is such a defense system against Optical Character Recognition (OCR) software. OCR can be defined as software which work for defeating CAPTCHA images and make countless number of registrations on the websites. This study proposes a new CAPTCHA context that is Korean CAPTCHA by means of the method which is splitting CAPTCHA images into several parts with random rotation values, and drawing random lines on a grid background by using Korean characters only. Lines are in the same color with the CAPTCHA text and they provide a distortion of image with grid background. Experimental results show that Korean CAPTCHA is a more secure and effective CAPTCHA type for Korean users rather than current CAPTCHA types due to the structure of Korean letters and the algorithm we are using: rotation and splitting. In this paper, the algorithm of our method is introduced in detail.