• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.355-361
• /
• 2003

In the present study, a new Real Time Subjective Evaluation (RTSSE) system was developed. The system is composed of two parts: a sensibility input part and sensibility evaluation part. The sensibility input part receives values, which are recorded on an input board using a stylus and digital tablet, from each subject's evaluation of his/her own subjective sensibility towards a particular stimulus. The sensibility evaluation part displays the level of pleasantness and arousal on one or two dimensions in real time. An experiment was conducted in order to investigate the feasibility and effectiveness of the RTSSE system. The present study compared Galvanic Skin Response (GSR) with the RTSSE by presenting 28 subjects in their 20s with pictures arousing either positive or negative sensibility. Following the experiment, an off-line subjective assessment using a questionnaire was given to the same subjects. According to the correlation coefficients, changes in subjective sensibility caused by the positive visual stimulus were related more closely to GSR, from the positive visual stimulus, and changes in subjective sensibility caused by the negative visual stimulus were related more closely to GSR from the negative visual stimulus. The questionnaire results showed marked similarity to the average responses of the RTSSE. In conclusion, the most remarkable characteristic of the present system is that it not only assesses the average sensibility when stimuli are presented, but also shows the changing strength of sensibility over time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.89-98
• /
• 2016

In this paper, we proposed an automated areal feature matching method based on geometric similarity without user intervention and is applied into areal features of many-to-many relation, for confusion of spatial data-sets of different scale and updating cycle. Firstly, areal feature(node) that a value of inclusion function is more than 0.4 was connected as an edge in adjacency matrix and candidate corresponding areal features included many-to-many relation was identified by multiplication of adjacency matrix. For geometrical matching, these multiple candidates corresponding areal features were transformed into an aggregated polygon as a convex hull generated by a curve-fitting algorithm. Secondly, we defined matching criteria to measure geometrical quality, and these criteria were changed into normalized values, similarity, by similarity function. Next, shape similarity is defined as a weighted linear combination of these similarities and weights which are calculated by Criteria Importance Through Intercriteria Correlation(CRITIC) method. Finally, in training data, we identified Equal Error Rate(EER) which is trade-off value in a plot of precision versus recall for all threshold values(PR curve) as a threshold and decided if these candidate pairs are corresponding pairs or not. To the result of applying the proposed method in a digital topographic map and a base map of address system(KAIS), we confirmed that some many-to-many areal features were mis-detected in visual evaluation and precision, recall and F-Measure was highly 0.951, 0.906, 0.928, respectively in statistical evaluation. These means that accuracy of the automated matching between different spatial data-sets by the proposed method is highly. However, we should do a research on an inclusion function and a detail matching criterion to exactly quantify many-to-many areal features in future.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.77-82
• /
• 2006

Digital halftoning is the technique to obtain a bilevel-toned image from continuous-toned image. Among halftoning methods, the error diffusion method gives better subjective quality than other halftoning ones. But it also makes edges of objects blurred. To overcome the defect, we proposes the modified error diffusion to enhance the edges using the property that human vision perceives the local average luminance and doesn't perceive a little variation of the spatial variation. The proposed method computes a spatialactivity, which is the difference between a pixel luminance and the average of its $3{\times}3$ neighborhood pixels' Iuminance weighted according to the spatial positioning. The system also usesof edge enhancement (IEE), which is computed from the normalized spatial activitymultiplied by the average luminance. The IEE is added to the quantizer's input pixel and feeds into the halftoning quantizer. The quantizer produces the halftone image having the enhanced edge. The computer experimental results show that the proposed method produces clearer bilevel-toned images than conventional methodsand the edge of objects is preserved well. Also the performance of the preposed method is improved, compared with that of the conventional method by measuring the edge correlation and the local average accordance at some ranges of viewing distance.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.13-25
• /
• 2021

The most widely used method for determining the blast effects of explosives is the Trauzl test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a tested explosive charge in the cavity of a lead block with defined quality and size. In this paper, Trauzl lead block test and High speed 3D-DIC (Digital Image Correlation) system were conducted to evaluate the stemming effect of the blast hole. The effects of stemming materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The blasting experiment was conducted with emulsion explosives. The stemming material in the blast hole of lead block, which was adopted in this study, were using sand and stone chips. Results of blasting experiment and numerical analysis showed that the expansion rates of lead block were most affected by stone chips followed by sand. Also, as result of dynamic strain measurement on the lead block surface of High speed 3D-DIC system, the displacement and surface strain on the block were the highest in the experiment case of stone chips stemming.

• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.493-503
• /
• 2019

This study presents a new method of estimating the size distribution of river bed gravel through image processing. The analysis was done in two steps; first the individual grain images were analyzed and then the grain particle segmentation of river-bed images were processed. In the first part of the analysis, the relationships (long axes, intermediate axes and projective areas) between grain features from images and those measured were compared. For this analysis, 240 gravel particles were collected at three river stations. All particles were measured with vernier calipers and weighed with scales. The measured data showed that river gravel had shape factors of 0.514~0.585. It was found that the weight of gravel had a stronger correlation with the projective areas than the long or intermediate axes. Using these results, we were able to establish an area-weight formula. In the second step, we calculated the projective areas of the river-bed gravels by detecting their edge lines using the ImageJ program. The projective areas of the gravels were converted to the grain-size distribution using the formula previously established. The proposed method was applied to 3 small- and medium- sized rivers in Korea. Comparisons of the analyzed size distributions with those measured showed that the proposed method could estimate the median diameter within a fair error range. However, the estimated distributions showed a slight deviation from the observed value, which is something that needs improvement in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.158-165
• /
• 2019

Although evaluation of writing disabilities identification and timely intervention are required, clinicians adopt a manual scoring method and there is a possibility of error due to subjective evaluation. In this study, the size ratio and position of letters are digitized and quantified through image processing of offline handwritten characters. We tried to evaluate objectively and accurately the performance of writing through comparison with existing methods. From November 12th to 16th, 2018, 20 adults without neurological injury were selected. They used a pencil to follow the 10 words, 2 sentence stimuli after keeping the usual habit, and we collected the writing test data. The results showed that the height of the word was 1.2 times larger than the width and it tilted to the lower left. The spacing interval was 9mm on average. In the Paired T test, a high correlation was showed between our system and existing methods in the word and sentence 2. This demonstrated the possibility as a testing tool. This study evaluated objectively and precisely writing performance of offline handwritten characters through image processing and provided preliminary data for performance standards. In the future, it can be suggested as a basic data on writing diagnosis of various ages.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.23-29
• /
• 2021

The specific strength of magnesium alloy is four times that of iron and 1.5 times that of aluminum. For this reason, its use is increasing in the transportation industry which is promoting weight reduction. At room temperature, magnesium alloy has low formability due to Hexagonal closed packed (HCP) structure with relatively little slip plane. However, as the molding temperature increases, the formability of the magnesium alloy is greatly improved due to the activation of other additional slip systems, and the flow stress and elongation vary greatly depending on the temperature. In addition, magnesium alloys exhibit asymmetrical behavior, which is different from tensile and compression behavior. In this study, a jig was developed that can measure the plane deformation behavior on the surface of a material in tensile and compression tests of magnesium alloys in warm temperature. A jig was designed to prevent buckling occurring in the compression test by applying a certain pressure to apply it to the tensile and compression tests. And the tensile and compressive behavior of magnesium at each temperature was investigated with the developed jig and DIC equipment. In each experiment, the strain rate condition was set to a quasi-static strain rate of 0.01/s. The transformation temperature is room temperature, 100℃. 150℃, 200℃, 250℃. As a result of the experiment, the flow stress tended to decrease as the temperature increased. The maximum stress decreased by 60% at 250 degrees compared to room temperature. Particularly, work softening occurred above 150 degrees, which is the recrystallization temperature of the magnesium alloy. The elongation also tended to increase as the deformation temperature increased and increased by 60% at 250 degrees compared to room temperature. In the compression experiment, it was confirmed that the maximum stress decreased as the temperature increased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.35-44
• /
• 2022

The aim of this study is to evaluate the development of the left mandibular third-molar development with modified Demirjian method and its relation to chronological age. A total of 1653 digital panoramic radiographs of healthy individuals aged between 7 and 23 years who visited Yonsei University Dental hospital were selected. The developmental status of the left mandibular third molars was assessed using dental maturity scoring proposed by Demirjian et al. The mean age of the first appearance of mineralization, complete crown formation, and complete root formation were around 9, 14, 21 years respectively. Statistically significant differences between males and females in the development stage of D and G were revealed that crown formation and root length completion were attained earlier in males than in females. There was significant positive relationship between age and third molar development in both sexes, and new formula was presented to estimate age of children and adolescents based on their developmental stages of third molars. In this study, the use of left mandibular third molar as a developmental marker is appropriate, and age estimation can be attained with dental maturity stage.

• Journal of Korea Trade
• /
• v.25 no.3
• /
• pp.21-47
• /
• 2021

Purpose - Offshoring has emerged as one of the major trends in international trade and has become one of the strategies for achieving competitiveness in the global market. In spite of this, the expected gains of offshoring can be offset by hidden costs and risks, such as those associated with the COVID-19 pandemic, the trade war between the USA and China, and the ongoing trade dispute between Korea and Japan. To obviate such business failure and prevent critical business blunders, offshoring strategies that efficiently consider both risk elements and potential wealth creation are urgently need. The first purpose of this study is to contribute to the development of more advanced offshoring strategies to help host countries select the best locations to manage supply chain risks and create unique value. The second purpose is to specifically analyze the current status of Korea and provide Korean companies with implications to be considered when deciding whether to offshore or re-shore. Design/methodology - A Network DEA model was applied to measure the comparative location efficiency of national competencies for offshoring strategy from perspectives of wealth creation opportunities (profitability and marketability) and supply chain risk management. The location efficiencies are compared among a total 70 countries selected from the Global Competitiveness Index (GCI) and globally attractive locations outlined by Kearney (2017). For the secondary analysis of efficiency, a t-test examining the nature of competitive advantage and the level of sophistication in production processes was implemented in three divisions. We then analyzed differences in offshoring performance in terms of the identified national traits. Moreover, Tobit regression analysis is conducted to investigate the correlation between value-added business activities and each divisional efficiency, seeking to determine how each degree of value-added business activity influences the increase in offshoring productivity. Findings - Regarding overall location efficiency for offshoring performance, only the USA and Italy were identified as being efficient as host countries for offshoring, under circumstances of advanced development, such as productivity and risk management. Korea ranks 13th among 70 countries. The determinants of national competitiveness depend on national traits (the nature of competitive advantage and business sophistication). Countries with labor/resource advantages and labor-intensive industries are more competitive in terms of marketability than others. In contrast, countries with strong technology-intensive industries benefit offshoring companies, particularly in the technology sector, with the added advantage of supply chain risk management. As the perception of a value chain is broader in a country, it can achieve both production sophistication and competitive advantages such as marketability and SCRM. Originality/value - Existing studies focus on offshoring effectiveness from a company perspective. This paper contributes to comparing country efficiency in producing core competencies related to an offshoring strategy and also segments countries into three performance-based considerations associated with the global offshoring market. It also details Korea's position as an offshoring location according to national efficiency and competency.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.2
• /
• pp.25-37
• /
• 2022

Objective : Through the bibliographic analysis method, the flow of research is grasped from a macroscopic point of view and the connection system of key words is conducted. The purpose of this is to provide basic data for conducting research on aging anxiety and lifestyle. Methods : Among the bibliographic analysis methods, a citation analysis method that identifies the association based on the number of citations and a simultaneous appearance word analysis method that identifies the association based on the number of keywords appeared was used. VOSviewer was used to cluster and chart the analyzed information. Results : The frequency of occurrence of papers by year showed a gradual increase until 2017 and a rapid increase from 2018. In the field of research paper study, research was most actively conducted in the field of psychiatry. In the citation analysis, the United States, Australia, and the United Kingdom showed high correlation with each other, and as a result of conducting simultaneous word analysis on major keywords, words with high association with aging anxiety were found to be depression. Conclusion : This study is meaningful in that it grasped the flow of aging anxiety and lifestyle research from a macroscopic point of view using a bibliographic analysis method. Based on this, it is expected to understand the importance of lifestyle from the preventive point of view of aging and to be used as basic data for intervention and related education.