• 한국융합학회논문지
• /
• 제10권3호
• /
• pp.73-79
• /
• 2019

머리 측두부 디지털 영상 및 통신 표준 영상을 이용한 외이도 길이, 상하 굴곡각도, 내 외경 비율에 따른 음향민감도를 외이도 모델링으로 시뮬레이션하고 측정하였다. 실험은 인간 가청주파수 기준으로 200Hz씩 증가하면서 1 파스칼의 압력으로 일정하게 전달된 주파수를 고막 음향크기로 나타내어 그 측정값들을 선형과 이차곡선 회귀분석으로 나타내었다. 그 결과 외이도 길이는 길수록, 외 내경 둘레의 비율은 높을수록 낮은 주파수에서 빠른 음향적 반응을 나타내었다. 회귀분석을 이용한 메타모델의 음향민감도 상관관계는 외이도 길이가 77%, 외 내경 비율 5%의 영향으로 나타났지만 상하 굴곡각도는 특별한 관계를 나타내지 못하였다. 이로써 인간의 청각음향 민감도는 외이도 길이가 길수록, 외 내경 둘레의 비율 차이가 높을수록 낮은 주파수에서 빠르게 반응하는 인자임을 알 수 있었다.

• 대한통합의학회지
• /
• 제6권4호
• /
• pp.29-38
• /
• 2018

Purpose: The purpose of this study was to investigate the psychological symptoms of insomnia, impulsiveness, and memory impairment according to the drinking frequency of college students. Methods: From May 4 to May 17, 2018, a questionnaire survey was conducted for men and women enrolled in J city S university in the Department of Occupational Therapy, Architecture, Social Welfare, and Digital Content. After visiting the department to explain the purpose of the study, 400 questionnaires were distributed to those who agreed to participate in the study. The SPSS 22.0 program was used to analyze the data collected. All statistical analyses were performed at the significance level of 5 %. Results: There is a correlation between alcohol consumption and psychological symptoms, such as insomnia, impulsivity, and memory impairment. As a result of analyzing all departments, insomnia, impulsivity, and memory impairment were the highest in the addiction level. In post-analysis of psychological symptoms, insomnia and impulsiveness had no significant difference, but there was a significant difference in memory impairment (p=.04). Conclusion: Our hope is that this study will help activate programs like preventative education and counseling on alcohol-related psychological symptoms for college students.

• 한국농공학회논문집
• /
• 제61권5호
• /
• pp.69-77
• /
• 2019

The objective of this study was to calibrate and validate the HSPF (Hydrological Simulation Program-Fortran) model for estimating the runoff of the Hapcheon dam watershed. Spatial data, such as watershed, stream, land use, and a digital elevation map, were used as input data for the HSPF model. Observed runoff data from 2000 to 2016 in study watershed were used for calibration and validation. Hydrologic parameters for runoff calibration were selected based on the user's manual and references, and trial and error method was used for parameter calibration. The $R^2$, RMSE (root-mean-square error), RMAE (relative mean absolute error), and NSE (Nash-Sutcliffe efficiency coefficient) were used to evaluate the model's performance. Calibration and validation results showed that annual mean runoff was within ${\pm}4%$ error. The model performance criteria for calibration and validation showed that $R^2$ was in the rang of 0.78 to 0.83, RMSE was 2.55 to 2.76 mm/day, RMAE was 0.46 to 0.48 mm/day, and NSE was 0.81 to 0.82 for daily runoff. The amount of inflow to Hapcheon Dam was calculated from the calibrated HSPF model and the result was compared with observed inflow, which was -0.9% error. As a result of analyzing the relation between inflow and storage capacity, it was found that as the inflow increases, the storage increases, and when the inflow decreases, the storage also decreases. As a result of correlation between inflow and storage, $R^2$ of the measured inflow and storage was 0.67, and the simulated inflow and storage was 0.61.

• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.97-105
• /
• 2019

Objective: This study was performed to evaluate the accuracy and reliability of a newly designed method to achieve mandibular dental model superimposition, using voxel-based cone-beam computed tomography (CBCT) registration. Methods: Fourteen dry cadaveric mandibles and six teeth extracted from patients with severe periodontitis were used to establish 14 orthodontic tooth-movement models. The protocol consisted of two steps: in the first step, voxel-based CBCT mandible superimposition was performed; the reference comprised the external portion of the symphysis, extending to the first molar. The laser-scanned dental model image was then integrated with the CBCT image to achieve mandibular dental model superimposition. The entire process required approximately 10 minutes. Six landmarks were assigned to the teeth to measure tooth displacement, using tooth displacement on the superimposed laser-scanned mandibles as the reference standard. Accuracy was evaluated by comparing differences in tooth displacement based on the method and the reference standard. Two observers performed superimposition to evaluate reliability. Results: For three-dimensional tooth displacements, the differences between the method and the reference standard were not significant in the molar, premolar, or incisor groups (p > 0.05). The intraclass correlation coefficients for the inter- and intra-observer reliabilities of all measurements were > 0.92. Conclusions: Our method of mandibular dental model superimposition based on voxel registration is accurate, reliable, and can be performed within a reasonable period of time in vitro, demonstrating a potential for use in orthodontic patients.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.57-68
• /
• 2021

Successfully adapting to digital and customer-oriented transformation, the concept of lean manufacturing professes the philosophy of creating greater benefit while minimizing losses. These losses are operations that do not add value in the production process to ensure the efficiency, flexibility, and profitability of projects. In the context of broad automation and digitalization of all sectors of the economy, mechanisms for combining automation technologies and lean production are becoming available. Moreover, when it comes to the efficient use of financial, human, or material resources, it is clear that the use of Industry 4.0 technologies can be an effective tool for achieving the goals of lean production, as many of them pursue the same goal. In this context, this article aims to study the effectiveness of the implementation of project management concepts at the global level and identify the main factors influencing its effectiveness to ensure the achievement of lean production through LEAN technologies and Industry 4.0 technologies. To achieve this goal, several statistical indicators were selected and several statistical methods of analysis were used: pairwise correlation, regression analysis, methods of comparison, synthesis, and generalization. Statistical analysis was conducted according to a survey conducted by the Project Management Institute (PMI) in 2020. An economic-mathematical model of dependence of project effectiveness in different regions of the world on the level of implementation of project management approaches is built, which shows that the increase in project effectiveness by 85% is due to financial losses, technical training, and consumer orientation. These results allow project managers to develop appropriate strategies to improve project management approaches at all levels. It is established that LEAN technologies and technologies of Industry 4.0 have several tools that have a positive effect on minimizing losses following the concept of lean production. Besides, given that the technology of Industry 4.0 is focused on the automation of Lean Production technology, a mechanism for the introduction of lean production using these technologies and methods.

• Composites Research
• /
• 제34권1호
• /
• pp.47-50
• /
• 2021

본 논문은 차량에 사용되는 B필러의 강화재를 기존의 스틸 소재에서 CFRP(Carbon Fiber Reinforced Plastics)와 GFRP(Glass Fiber Reinforced Plastics)로 대체하여 경량화하는 것이 목표다. 이를 위해서는 무게는 감소시키면서 기존 B필러를 대체할 수 있는 구조안정성을 확보해야 한다. 기존 B필러는 스틸 아우터(outer)를 포함하여 다양한 형상의 스틸 강화재로 구성되며, 이와 같은 스틸 강화재 중 2가지의 스틸 강화재를 복합재로 대체하고자 한다. 이와 같은 스틸 강화재는 강화재 각각을 따로 제작하여 용접을 통해 결합되지만, 복합재 강화재는 패치(patch) 형태의 CFRP와 리브(rib) 구조의 GFRP를 활용하여 압축과 사출 공정을 통해 한번에 제작된다. CFRP는 B필러의 고강도부에 부착되어 측면 하중에 저항하도록 하였으며, GFRP 리브는 위상 최적화(Topology optimization) 기법을 통해 비틀림과 측면 하중을 저항하도록 설계하였다. 구조해석을 통해 기존 스틸 강화재와 비교 분석을 수행하였고, 경량화율을 산출하였다.

• 한국정보통신학회논문지
• /
• 제23권10호
• /
• pp.1234-1239
• /
• 2019

본 논문에서는 추가 설비 없이 기존 CCTV 영상을 디지털 영상 처리를 통하여 미세먼지 농도를 측정하는 방법을 제안한다. 영상처리 알고리즘은 노이즈 제거, 샤프닝, ROI 지정, 엣지 강도 계산, HSV 변환을 통한 보정 순으로 구성되며 C++ OpenCV 라이브러리를 이용해 구현하였다. 한달동안 캡쳐한 CCTV 이미지들에 본 알고리즘을 적용한 결과 ROI 영역에 대해 계산된 엣지 강도는 미세먼지 농도와 밀접한 관계가 있는 것으로 나타났다. 두 데이터간 상관관계를 추론하고자 MATLAB을 이용하여 거듭제곱 방정식 형태의 추세선을 수립하였으며 그 추세선으로부터 이탈한 데이터 포인트들의 개수는 12.5% 내외로 나타나 전체적으로 약 87.5%의 정확도를 보였다.

• Journal of Oral Medicine and Pain
• /
• 제46권2호
• /
• pp.21-32
• /
• 2021

Purpose: The purpose of the present study was to investigate the correlation between age and 34 radiomorphometric parameters on panoramic radiographs, and to provide generalized linear models (GLMs) as a non-invasive, inexpensive, and accurate method to the forensic judgement of living individual's age. Methods: The study included 417 digital panoramic radiographs of Korean individuals (178 males and 239 females, mean age: 32.57±17.81 years). Considering the skeletal differences between the sexes, GLMs were obtained separately according to sex, as well as across the total sample. For statistical analysis and to predict the accuracy of the new GLMs, root mean squared error (RMSE) and adjusted R-squared (R²) were calculated. Results: The adjusted R²-values of the developed GLMs in the total sample, and male and female groups were 0.623, 0.637, and 0.660, respectively (p<0.001), while the allowable RMSE values were 8.80, 8.42, and 8.53 years, respectively. In the GLM of the total sample, the most influential predictor of greater age was decreased pulp area in the #36 first molar (beta=-26.52; p<0.01), followed by the presence of periodontitis (beta=10.24; p<0.01). In males, the most influential factor was the presence of periodontitis (beta=9.20; p<0.05), followed by the number of full veneer crowns (beta=2.19; p<0.001). In females, the most influential predictor was the presence of periodontitis (beta=18.10; p<0.001), followed by the tooth area of the #16 first molar (beta=-11.57; p<0.001). Conclusions: We established acceptable GLM for each sex and found out the predictors necessary to age estimation which can be easily found in panoramic radiographs. Our study provides reference that parameters such as the area of tooth and pulp, the number of teeth treated, and the presence of periodontitis should be considered in estimating age.

• 산경연구논집
• /
• 제12권4호
• /
• pp.35-51
• /
• 2021

Purpose: As the digital environment has expanded opportunity for consumers to acquire information from social media and social network services(SNS), With this environment, influencer has not only promoted products, but also participated in distribution and influencing on their followers. Despite the increasing interest in influencers, there has not been enough research on the structure of fashion influencer, relationship of immersion and purchase intention. This study examined the effects of fashion influencers' characteristics to the immersion of relationship with followers and purchase intention. Research design, data and methodology: For data collection, a pilot survey and the final survey were conducted. The pilot survey data was conducted to 50 female SNS users following fashion influencers. Based on the pilot tests, questionnaire was revised and the final survey was conducted online from august 22 to September 1, 2019 to female SNS users who have followed fashion influencer. A total of 408 data were collected, and exploratory factor analysis, correlation analysis, and structural equational modeling techniques were employed for the data analyses using AMOS 26.0 and SPSS 26.0. Results: First, five factors were extracted for the fashion influencers' characteristics: interactivity, similarity, reliability, expertise and attractiveness. Second, fashion influences' reliability, expertise, similarity, interactivity have a positive (+) effects on relationship immersion; however, attractiveness has no effect on relationship immersion with followers and fashion influencer. It was also determined that relationship immersion had positive (+) influences on purchase intention. The relationship immersion has been found to have a partially mediated effect and similarity has complete mediated effects between interactivity, reliability, and expertise of fashion influencers and purchasing intentions. In terms of fashion opinion leadership, it was found to have a significant influence on purchase intention only for low fashion leadership groups. Conclusions: The present study found the structural relationships among the influencer characteristics, relationship immersion and purchase intentions to provide framework for succeeding research. This research revealed academic association of intention of purchasing through use of fashion social media and fashion influencer marketing. The results also showed the practical implications that fashion influencers' expertise and reliability perceived by their followers are key determinants to success in influencer marketing.

• 한국프랜차이즈경영연구
• /
• 제11권4호
• /
• pp.17-29
• /
• 2020

Purpose: As the untact culture has spread due to the recent COVID-19, the service industry as well as the beauty salon is shrinking. In order to overcome such a crisis in beauty salons, the lower dimension of beauty salon service quality is divided into servicescape, technical service, and employee service, and actions are taken with the 'perceived value of the customer' as a parameter. In this study, S-O-R(Stimulus-Organism-Response) theory was applied for customer-centered analysis, and gender and regularity were selected as moderator variables to add practical implications. Research design, data, and methodology: All constructs were measured using items developed and used in the previous study. A total of 261 questionnaires were collected online using NaverForm. The data were analyzed using factor analysis, correlation analysis, and measurement model analysis with SPSS 22.0 and AMOS 22.0. After testing the research model and hypothesis for the entire group, a multi-group analysis was conducted by dividing into male and female groups, regular customers, and non-regular customers. Results: First, this study showed that the service environment of beauty salon customers had a negative (-) effect on perceived utilitarian value, and the technical service and perceived hedonic value had a positive (+) effect on the customer's behavioral intention. Technical service and employee service had a positive (+) effect on perceived hedonic value, but perceived hedonic value did not affect customer's behavioral intention. Second, there is no statistically significant difference in each path between male and female groups. Third, there was a statistically significant difference between regular customers and non-regular customers, only the path that the servicescape influences the perceived hedonic value. Conclusion: According to the results of this study, technical service and utilitarian value should be considered in order to induce behavioral intention of customers, and technical service quality should be considered first. Also, operating a beauty salon requires a differentiated approach to the salon servicescape according to the ratio of non-regular and regular customers. The beauty salon servicescape generally showed negative practical value for non-regular customers, but positive for the Hedinic value for servicescape such as comfortable service and clean interior for regular customers.