• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.145-152
• /
• 2010

Most wearable system for mobile healthcare applications consists of three parts. The first part is the sensing elements based on bio-signal, the second is the circuit module for control, data acquisition and wireless communication and control and the third is garment with a built-in electrodes and circuits. The existing healthcare garment systems have to find a solution to signal-wire and uncomfortable and inappropriate electrode to long-term attachment. Even if the wireless communication is used for healthcare garment system, the interface between sensors and circuits have to use wires. To solve these problems, this paper use electrode using PEDOT coated PVDF nanoweb for ECG signal and PVDF film sensor for respiratory signal. And, we constructed garment network using digital yarn of 10um, and transmitted ECG and respiratory signal to mobile phone through the integrated circuit with bluetooth called station To evaluate feasibility of the proposed mobile healthcare garment system, we experimented with transmission and measurement of ECG and respiratory signal using nanoweb electrode and digital yarn. We got a successful result without noise and attenuation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2155-2158
• /
• 2003

A term of home automation that was in fashion only a few years ago has not been used any more. Nowadays, We have been used a term of home network or digital home than home automation much. While internet infra is diffused at home, data network corp., communication corp., electric appliance corp. and home automation control system corp. which we did not mind each other particularly constructed consortium, and they have designs on home network market. Also, cellular phone's growth tried home networking by using not only wired internet but also broadband wireless communication. Regardless, many solutions are coming out it is few to be applied to real life because the standard is not determined with the protocol each other. Therefore, we developed home network system using USB(Universal Serial Bus) that has the possibility most in home networking standard. The mobile USB home control system is excellent at expansibility and portability. Also we can complete low cost and stable system using an embedded system.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.115-123
• /
• 2009

The change of digital technology caused not only the whole human life but also the change of a thinking form and an expression method of human beings. Also, the interactive communication structure became to form in space structure, and space users also get changed to an active system. The interaction between a human being and space, which uses digital media as a medium, makes a human being experience sensitivity through a cognitive process of a human being. The present research aimed to find out characteristics and expression of emotional space applied with digital technology based on the relationship between media space and cognitive functioning and to realize new emotional space. The research method was to define on digital media and experience by cognition of a human being through a literature research and a precedent research and to consider on approach to emotional space through experience of a cognition process like this. Based on the theory like this, the present research progressed by focusing on dramatized characteristics of experience in the digital media space and emotional space expression by induced characteristics. Through the analysis like this, the space applied with digital media could appear as a field of communication that can experience by forming mutual relation through perception of a human being. Additionally, the space induces active participation of a human being through various productions of media and responds to movement, and thus, this suggested infinite possibility as emotional space that can try new experience by stimulating a sense as effect of a cognitive process of a human being.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.3
• /
• pp.138-151
• /
• 2023

Korea's port infrastructure is rapidly aging, with old port facilities with more than 30 years of public life expected to surge from about 23% in 2019 to 47% in 2029. Traditional, aging ports lose competitiveness in logistics processing, reducing development around the port and increasing human casualties due to the human resource-based maintenance of the facilities. Therefore, it is necessary to solve this problem by establishing systematic management technology based on a digital twin. This research aimed to present the specific implementation steps of a digital twin reflecting smart port technology through cases of port infrastructure disasters, aging status, and smart ports. The study analyzed the port infrastructure linkage system and created and mapped scenarios essential for digital twin implementation. Three-dimensional (3D) modeling and simulation data for disaster and aging management among existing port infrastructure systems were collected. A digital twin port was implemented with 3D modeling. It implements a port digital twin simulation that links data such as sensing data and image data acquired from the port infrastructure in real time. Implementing a digital twin port for port infrastructure disasters and aging management can secure predictive port infrastructure management and disaster safety

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.915-919
• /
• 2014

Since smart phones are widely used globally, the demand for high-speed mobile communications are increasing. To accommodate the increased communication demand, the next-generation mobile communication services such as LTE-Advanced are deployed. In the LTE-Advanced base stations, the base station schemes of Digital Unit (DU) and Radio Unit (RU) are widely used. Here, the link between DU and RU is called fronthaul link. In the current fronthaul link, a digital optical communication interface is used, which is called Common Public Radio Interface (CPRI). However, the CPRI link cannot support the increased mobile traffic efficiently. Therefore, in this paper, we investigate an alternative technology based on the Radio over Fiber (RoF) to accommodate the increased mobile traffic economically.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.1958-1964
• /
• 2016

AC railway feeding system use single phase to supply power to the railway vehicles. And the system use the rail track as a return current path, so that current flows in the rail. In this situation inductive interference on communication system and unsafe environment can appear on railway system. Therefore knowing the current distribution of catenary system and analysing the return current is required. In this study detail return current distribution was analyzed by modeling the catenary system as 4-conductors group. The distribution characteristics and trends of return current were studied by using the PSCAD/EMTDC and FDTD method that based on Maxwell equation was used to calculate the induced voltage. Simulation code was made by MATLAB. Using this study result data, we can suggest the proper installation location of digital device and these data can be used for additional studies related to return current or induced voltage as a base data.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.47-57
• /
• 2019

We examine the weaknesses of the existing OOXML-based MS-Word file structure, and analyze how data concealment and forgery are performed in MS-Word digital documents. In case of forgery by including hidden information in MS-Word digital document, there is no difference in opening the file with the MS-Word Processor. However, the computer system may be malfunctioned by malware or shell code hidden in the digital document. If a malicious image file or ZIP file is hidden in the document by using the structural vulnerability of the MS-Word document, it may be infected by ransomware that encrypts the entire file on the disk even if the MS-Word file is normally executed. Therefore, it is necessary to analyze forgery and alteration of digital document through internal structure analysis of MS-Word file. In this paper, we designed and implemented a mechanism to detect this efficiently and automatic detection software, and presented a method to proactively respond to attacks such as ransomware exploiting MS-Word security vulnerabilities.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.549-554
• /
• 2014

Studies on the intelligent vehicles that are converged with IT and vehicular technologies are currently under active discussion. A variety of communication technologies for safety intelligent vehicle services are support. As such intelligent vehicles use communication technologies, they are exposed to the diverse factors of security threats. To conduct intelligent vehicle security authentication solutions, there are some factors that can be adopted ownership, knowledge and biometrics[6,7]. This paper proposes to analyze the factors to threaten intelligent vehicle, which are usually intruded through communication network system and the security solution using biometric authentication scheme. This study proposed above user's biometrics information-based authentication scheme that can solve the anticipated problems with an intelligent vehicle, which requires a higher level of security than existing authentication solution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.135-140
• /
• 2014

In this paper, we describe the contents of noise characteristic enhancement using digital filtering to the motion vector in the pattern noise of optical mouse. The designed circuit is implemented to enhance the smoothing and trembling with filtering and averaging of x, y motion vector before PS2 or USB output. The function is verified by using FPGA and the performance is measured by the fabricated chip using $0.35{\mu}m$ standard CMOS process. The system clock is 6MHz and the motion vector has the range of +6 to -6 per 1/1700sec. It is tested using the Cartesian robot to measure the noise characteristic enhancement.