• Title/Summary/Keyword: digital I & C

Search Result 406, Processing Time 0.037 seconds

Estimating the Attribute Values of 4 Major River Estuaries in Korea -Focusing on Testing for the IIA Assumption in MNL Model and the Alternative Models- (4대강 하구의 속성 가치 추정 -다항로짓모형에서 IIA가정의 검토와 대안 모형을 중심으로-)

  • Shin, Youngchul
    • Environmental and Resource Economics Review
    • /
    • v.22 no.3
    • /
    • pp.521-545
    • /
    • 2013
  • This study applied choice experiment(CE) method(which is included in the stated preference method) to estimate values of some important attributes(i.e. type of estuary, water quality of river in estuary, water quality of sea in estuary, biodiversity level of estuary) of 4 major river(Hangang, Guemgang, Yeongsangang, Nakdonggang) estuaries in Korea. Although the multinomial logit model(MNL) is generally applied to analyse the CE data, testing for IIA assumption with the Hausman and McFadden test in MNL model shows that the IIA assumption in our data is rejected. Therefore, the heteroscedastic extreme value model(HEV) and the multinomial probit model(MNP) which are not based on the IIA assumption are used to analyse our CE data. As results, the coefficients and the elicited economic values of MNL model are seriously distorted if the IIA assumption is not satisfied in MNL model. The estimation results of MNP model show that the economic values are elicited as 352.3 billion won(95% C.I. 261.1 - 477.8 billion won) for natural estuary, 411.5 billion won(95% C.I. 338.5 - 525.5 billion won) for one grade improvement of river water quality in estuary, 358.9 billion won(95% C.I. 292.5 - 457.0 billion won) for one grade improvement of sea water quality in estuary, and 151.9 billion won(95% C.I. 99.0 - 218.6 billion won) for one grade improvement of biodiversity level of estuary. Therefore, the value of estuary is reached to 2,197.0 billion won(95% C.I. 1,721.0 - 2,879.9 billion won) if any natural estuary in 4 major rivers has good water quality of river in estuary(i.e. 2nd grade), good water quality of sea in estuary(i.e. 1st grade), and good biodiversity level of estuary.

A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design - (디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 -)

  • Kim Seok-Hwa
    • Journal of Science of Art and Design
    • /
    • v.5
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

Electrical Characterization of BST Thin Film by IDC pattern (IDC 패턴에 따른 BST 전기적 특성)

  • Roh, Ji-Hyoung;Kim, Sung-Su;Song, Sang-Woo;Kim, Ji-Hong;Koh, Jung-Hyuk;Moon, Byung-Moo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.200-200
    • /
    • 2008
  • This paper reports on electrical characterization by IDC pattern using BST$(Ba_{0.5}Sr_{0.5}TiO_3)$ thin film. BST thin films have been deposited on $Al_2O_3$ Substrates by Nd-YAG pulsed laser deposition with a 355nm wavelength at $700^{\circ}C$. The post deposition annealing at $750^{\circ}C$ in flowing $O_2$ atmosphere for I hours. The capacitance of IDC patterns have been measured from 1 to 10 GHz as a function fo electric field (${\pm}40$ KV/cm) at room temperature using interdiigitated Au electrodes deposited on top of BST. The IDC patterns have three type of fingers number. For the finger paris was increased onto $Al_2O_3$, the capacitance increased. The capacitance of 5 pairs finger was 0.3pF and 10 pairs finger was 0.9pF.

  • PDF

A Study on the Creep Characteristics of QFP Solder Joints (QFP 솔더접합부의 크립특성에 관한 연구)

  • Cho, Yun-Sung;Cho, Myung-Gi;Kim, Jong-Min;Lee, Seong-Hyuk;Shin, Young-Eui
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.16 no.5
    • /
    • pp.151-156
    • /
    • 2007
  • In this paper, the creep characteristics of lead and lead-free solder joint were investigated using the QFP(Quad Flat Package) creep test. Two kind of solder pastes(Sn-3Ag-0.5Cu, Sn-0.2Sb-0.4Ag-37.4Pb) were applied to the QFP solder joints and each specimen was checked the external and internal failures(i.e., wetting failure, void, pin hole, poor-heel fillet) by digital microscope and X-ray inspection. The creep test was conducted at the temperatures of $100^{\circ}C$ and $130^{\circ}C$ under the load of 15$\sim$20% of average pull strength in solder joints. The creep characteristics of each solder joints were compared using the creep strain-time curve and creep strain rate-stress curves. Through the comparison, the Sn-3Ag-0.5Cu solder joints have higher creep resistance than that of Sn-0.3Sb-0.4Ag-37.4Pb. Also, the grain boundary sliding in the fracture surface and the necking of solder joint were observed by FE-SEM.

Simultaneous Switching Characteristic Analysis and Design Methodology of High-Speed & High-Density CMOS IC Package (고밀도 고속 CMOS 집적회로에서 동시 스위칭에 의한 패키지 영향해석 및 패키지 설계방법)

  • 박영준;최진우;어영선
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.36C no.11
    • /
    • pp.55-63
    • /
    • 1999
  • A new CMOS If Package design methodology is presented, analyzing the electrical characteristics of a package and its effects on the CMOS digital circuits. An analytical investigation of the package noise effects due to the simultaneous switching of the gates within a chip, i.e., simultaneous switching noise (SSN) is performed. Then not only are novel design formula to meet electrical constraints of the Package derived, but also package design methodology based on the formula is proposed. Further, in order to demonstrate the Proposed design methodology, the design results are compared with HSPICE (a general purpose circuit simulator) simulation for $0.3\mu\textrm{m}$-based CMOS circuits. According to the proposed design procedures, it is shown that the results have excellent agreements with those of HSPICE simulation.

  • PDF

4D Reconstruction of Cine Cardiac MR Images (심장 자기공명영상의 4차원 재구성)

  • Lee, D.H.;Kim, J.H.;Song, I.C.;Cho, S.S.;Park, J.H.;Han, M.C.;Min, B.G.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1996 no.11
    • /
    • pp.314-316
    • /
    • 1996
  • To diagnose cardiac malfunctions, various imaging techniques have been applied to heart : DSA(Digital Subtracted Angiography), Doppler Ultrasound, MR Angio. But it is difficult to observe three dimensional heart motion which is the most intuitive tool for diagnosis, only by using these methods. In this research, we have suggested 4-Dimensional reconstruction scheme of heart motion images that can be acquired by ECG-gated cine MR imaging. One cardiac cycle was devided into $9\sim15$ phases and for each phase 3D reconstructed volumn heart was made. We can observe 3D volumns along the cardiac cycle, time. So the results were 4-D reconstructed data.

  • PDF

Development of GIS for the Food Chain Assessment around Kori Nuclear Power Plant Using ArcView (ArcView를 이용한 고리 원전 주변 육상생태계 평가를 위한 GIS 구축)

  • Kang, H.S.;Choi, H.J.;Yu, D.H.;Keum, D.K.;Choi, Y.H.;Lim, K.M.;Lee, H.S.;Lee, C.W.
    • Journal of Radiation Protection and Research
    • /
    • v.30 no.3
    • /
    • pp.121-130
    • /
    • 2005
  • Geographical Information System(GIS) was established to display the calculation results which show the concentration change with time and regions in case of an accidental release of radionuclides from Kori Nuclear Power Plants. GIS included the commercial program, ArcView(ESRI), and a basic digital map of 1:5000 scale lot 20km by 20km around Kori area. The object for the presentation was $^{131}I$ concentration in rice which is one of staple foodstuffs. Provided by deposited $^{131}I$ concentrations, ECOREA-II code computed the $^{131}I$ concentration of the soil and the plant in the area divided by In unit cells in total, in which the concentrations also varied with time. The results were introduced into the attributed data of previously designed polygon cells in ArcView. In order to display the concentration change with time by monotonic color, the RGB value for ArcView color lamp was controlled. This display definitely helped the concentration change around Kori area be acceptable to public.

Imaging Characteristics of Computed Radiography Systems (CR 시스템의 종류와 I.P 크기에 따른 정량적 영상특성평가)

  • Jung, Ji-Young;Park, Hye-Suk;Cho, Hyo-Min;Lee, Chang-Lae;Nam, So-Ra;Lee, Young-Jin;Kim, Hee-Joung
    • Progress in Medical Physics
    • /
    • v.19 no.1
    • /
    • pp.63-72
    • /
    • 2008
  • With recent advancement of the medical imaging systems and picture archiving and communication system (PACS), installation of digital radiography has been accelerated over past few years. Moreover, Computed Radiography (CR) which was well established for the foundation of digital x-ray imaging systems at low cost was widely used for clinical applications. This study analyzes imaging characteristics for two systems with different pixel sizes through the Modulation Transfer Function (MTF), Noise Power Spectrum (NPS) and Detective Quantum Efficiency (DQE). In addition, influence of radiation dose to the imaging characteristics was also measured by quantitative assessment. A standard beam quality RQA5 based on an international electro-technical commission (IEC) standard was used to perform the x-ray imaging studies. For the results, the spatial resolution based on MTF at 10% for Agfa CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.9 cycles/mm and 2.8 cycles/mm, respectively. The spatial resolution based on MTF at 10% for Fuji CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.4 cycles/mm and 3.2 cycles/mm, respectively. There was difference in the spatial resolution for $14{\times}17$ inches, although radiation dose does not effect to the MTF. The NPS of the Agfa CR system shows similar results for different pixel size between $100{\mu}m$ for $8{\times}10$ inch I.P and $150{\mu}m$ for $14{\times}17$ inch I.P. For both systems, the results show better NPS for increased radiation dose due to increasing number of photons. DQE of the Agfa CR system for $8{\times}10$ inch I.P and $14{\times}17$ inch I.P resulted in 11% and 8.8% at 1.5 cycles/mm, respectively. Both systems show that the higher level of radiation dose would lead to the worse DQE efficiency. Measuring DQE for multiple factors of imaging characteristics plays very important role in determining efficiency of equipment and reducing radiation dose for the patients. In conclusion, the results of this study could be used as a baseline to optimize imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE for different level of radiation dose.

  • PDF

Development of Gamma Camera System for Small Animal Imaging and Environmental Radiation Detection (소동물 영상화 및 환경 방사선 검출을 위한 감마카메라 개발)

  • Baek, Cheol-Ha
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.2
    • /
    • pp.475-481
    • /
    • 2014
  • The aim of this work was to develop the gamma camera system for small animal gamma imaging and environmental radiation monitoring imaging using a parallel hole collimator and pinhole collimator. The small gamma camera system consists of a CsI(Tl) scintillation crystal with 6 mm in thickness and $50{\times}50mm$ in area coupled with a Hamamatsu H8500C PSPMT, are resistive charge divider, pre-amplifiers, charge amplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a computer for control and display. We have developed a radiation monitoring system composed of a combined pinhole gamma camera and a charge-coupled devices (CCD) camera. The results demonstrated that the parallel hole collimator and pinhole collimator gamma camera designed in this study could be utilized to perform small animal imaging and environmental radiation monitoring system. Consequently in this paper, we proved that our gamma detector system is reliable for a gamma camera which can be used as small animal imaging and environmental radiation monitoring system.

Design and implementation of Serial Communication for IoT Sensing Technology (IoT의 센싱 기술을 위한 직렬통신 설계 및 구현)

  • Park, Sangbong;Jeong, Daeseung
    • The Journal of the Convergence on Culture Technology
    • /
    • v.3 no.3
    • /
    • pp.27-30
    • /
    • 2017
  • IoT could be applied to various areas because of the important role of sensor. The existing sensor communication method is to quickly transmit data by using clock and two data pins based on the I2C serial communication method. As the objects used are gradually light-weighted and the amount of data transmission is decreased, the simplification of hardware is more emphasized as an essential design element than the speed of transmission. This paper designed a circuit to send/receive data in series, and also realized arduino, by analyzing the existing communication method and then using a single pin for light-weight. The single pin serial communication could reduce power consumption, which is suitable for the sensor area using digital communication of IoT area.