• 대한화학회지
• /
• 제39권5호
• /
• pp.356-363
• /
• 1995

유기 리간드(디크로로 비스[η-싸이크로 펜타디엔닐])을 가지고 전이금속 4가$(Nb^{4+}와\;Mo^{4+}$와의 착물들에 대한 거동을 UV-vis 분광학적, 자기적, 그리고 전기화학적 방법에 의해 조사하였다. 2 또는 3개의 에너지 흡수띠가 이들 착물들의 스펙트라에 의해 관찰되었다. 결정장 갈라짐 에너지 크기와 스핀 짝지움 에너지 그리고 결합 세기는 착물들의 스펙트라로부터 얻어졌다. 이들은 비편재화이고, 낮은 스핀 상태이며 그리고 강한 결합 세기임을 알았다. 자기쌍극자 모멘트는 상자기성과 반자기성 착물이었다. 착물들의 산화환원 과정은 비수용매속에서 순환 전압전류법에 의해서 조사되었다. Nb-C 착물의 산화환원 반응과정은 일전자의 확산과 반응 전류에 의한 짝-단일 반응이었고 또한 Mo-C 착물에서는 일전자의 반응전류에 의한 짝-단일 반응이었다.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.434-438
• /
• 2010

The selenization process has been a promising method for low-cost and large-scale production of high quality CIGS film. However, there is the problem that most Ga in the CIGS film segregates near the Mo back contact. So the solar cell behaves like a $CuInSe_2$ and lacks the increased open-circuit voltage. In this study we investigated the Ga distribution in CIGS films by using the $Ga_2Se_3$ layer. The $Ga_2Se_3$ layer was applied on the Cu-In-Ga metal layer to increase Ga content at the surface of CIGS films and to restrict Ga diffusion to the CIGS/Mo interface with Ga and Se bonding. The layer made by thermal evaporation was showed to an amorphous $Ga_2Se_3$ layer in the result of AES depth profile, XPS and XRD measurement. As the thickness of $Ga_2Se_3$ layer increased, a small-grained CIGS film was developed and phase seperation was showed using SEM and XRD respectively. Ga distributions in CIGS films were investigated by means of AES depth profile. As a result, the [Ga]/[In+Ga] ratio was 0.2 at the surface and 0.5 near the CIGS/Mo interface when the $Ga_2Se_3$ thickness was 220 nm, suggesting that the $Ga_2Se_3$ layer on the top of metal layer is one of the possible methods for Ga redistribution and open circuit voltage increase.

• 대한기계학회논문집B
• /
• 제41권11호
• /
• pp.767-773
• /
• 2017

인쇄기판형 열교환기는 금속박판에 유체의 유로를 형성하여 고온고압 환경에서 금속분자의 확산을 이용하여 접합하는 방식으로 제작하므로 고온고압 유체의 열교환에 유리한 장점을 가지고 있다. 또한 금속박판에 유로를 미세하게 식각하여 형성시킬 수 있으므로 단위체적당 전열면적을 크게 할 수 있어 열교환 집적도가 향상되어 고효율의 열전달 효과를 낼 수 있다. 집적도를 향상시키기 위해서는 금속부분을 줄일수록 유리하나 미세채널 내에 고압 유체가 흐르게 되면 압력에 의한 변형이 발생할 수 있으므로 채널간 금속박판의 변형이 일어나지 않도록 채널 형상 및 구조를 설계하여야 한다. 또한 미세채널이 모여서 배관으로 연결되는 헤더 부분의 내압설계도 중요하다. 본 연구에서는 기존 내압규격을 이용하여 운전 조건에 따라 인쇄기판형 열교환기를 설계할 수 있는 방법론을 제시하고 유동조건에 따른 전산해석을 통하여 설계 결과를 검증해 보고자 한다.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.