• 대한한의학회지
• /
• 제25권1호
• /
• pp.40-48
• /
• 2004

Background and Objectives: Aroma therapy using Eucalyptus Globulus essential oil for curing allergic rhinitis is an inhalation treatment which has been applied as an aid to oriental clinics which use a fundamental treatment such as acupuncture and herbs. There have been no studies so far performed on the effect of this oils' use, only . We aimed to find out the therapeutic effect of its exclusive use only on an Animal Model with Allergic Rhinitis. Materials and Methods: Sprague-Dawley rats were induced the allergic rhinitis by ovalbumin solution. And then, rats in the treated group were treated by diffusing Eucalyptus essential oil in a flask for 7 days. Compared with the treated group, rats in the control group were treated by diffusing normal saline in a flask for 7 days. We observed changes in glandular cells and mast cells in nasal mucosa and submucosa; also changes in the number of eosinophils and neutrophils in blood and the succus of rhinenchysis. Results: The number of neutrophils in the succus of rhinenchysis was significantly decreased in treated group compared with control group(p<0.05). The number of neutrophils in blood and mast cells in nasal mucosa were decreased in the treated group but, these were not significant statistically(p>0.05). Histologic changes showed edema; congestion and expansion of grandular cells in nasal submucosa and hypertrophy of epithelium in nasal mucosa were decreased in treated group compared with control group. Conclusions: The results may suggest that the inhalation treatment using Eucalyptus essential oil decreases the inflammatory response on an Animal Model with Allergic Rhinitis.

• Tribology and Lubricants
• /
• 제25권1호
• /
• pp.7-12
• /
• 2009

Coating brittle intermetallic compounds on metal can enlarge the range of their use. It is found that intermetallic compound coating layers made by only combustion synthesis in an electric furnace have porous multi-phase structures containing several intermediate phases, even though the coating layers show good wear resistance. In this study, dense $Ni_{3}Al$ single phase layer corresponding to the initial composition of the mixed powder is coated on two different ferrous materials by the diffusing treatment after combustion synthesis. After- ward, sliding wear behaviors of the coating layer are evaluated in comparison with that of the coating layer with porous multi-phase structure made by only combustion synthesis. As a result, the wear properties of the coating layer composed of dense $Ni_{3}Al$ single phase are considerably improved at the range of low sliding speed com- pared with that of the coating layer with porous multi-phase structure, particularly in the running-in wear region. This is attributed to the fact that wear of the coating layer is progressed by shearing as a sequence of adhesion, not by occurring of pitting on the worn surface due to having dense structure without pores.

• 동의생리병리학회지
• /
• 제26권6호
• /
• pp.803-811
• /
• 2012

Oriental Medicine always attach great importance to the damp diseases. Dampness is related with many organs and many clinical diseases. The cause and the location of the damp disease, nature of the symptoms, combination with other pathogenic factors are very diverse. This article analyzed the concept, cause of disease, pathogenesis, characteristic of symptoms, treatment method and prescriptions of Epidemic Warm Diseases of dampness syndrome and cases of dampness-heat diseases based on the theories of Epidemic Warm Diseases and found that theories of Epidemic Warm Diseases have very wide area of application. Dampness is classified into cold-dampness and dampness-heat by combination of heat or cold. The dampness syndrome is related with organs such as lung, spleen, kidney, triple energizers and bladder, and affects liver and heart. The basic treatment methods are dispelling dampness turbidity and diffusing qi movement. The detail treatment methods are spreading lung qi with lightness and resolving dampness and excreting turbidity in upper energizer, opening and dipping down with pungent-bitter and diffusing qi movement and strengthening the spleen and stomach in the middle energizer, draining dampness with bland in the lower energizer. Warming Yang is the main method of treatment for cold-dampness and clearing heat is for dampness-heat with the assistant methods such as resolving dampness and promoting the flow of qi. 5. Acute fever, virus diseases, epidemic diseases among modern diseases are much related with the dampness-heat syndrome.

• 한국결정성장학회지
• /
• 제29권2호
• /
• pp.50-53
• /
• 2019

박막 태양전지에 주로 적용되는 다결정 규소층을 AIC(Aluminum Induced Crystallization) 공정을 이용하여 제조하였다. 결정립의 확대를 위하여 selective diffusion barrier 사용하였다. 이 diffusion barrier는 $Al_2O_3$ 막을 사용하였다. 공정시간의 단축을 위하여 열처리는 RTA(Rapid Thermal Annealing) 공정으로 진행하였다. 비정질 실리콘의 결정화는 XRD 측정을 통해 분석했다. 그 결과 $500^{\circ}C$에서 결정화되었으며, 결정 크기는 $15.9{\mu}m$로 계산되었다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1284-1292
• /
• 2006

Heat treatment is a controlled heating and cooling process to improve the physical and/or mechanical properties of metal products without changing their shapes. Today finite element method is widely used to simulate lots of manufacturing processes including heat treatment and surface hardening processes, which aims to reduce the number of time- and cost-consuming experimental tryouts. In this study we tried, using this method, to simulate the full carburizing process that consists of carburizing, diffusing and quenching, and to predict the distribution of carbon contents, phase fraction and hardness, thermal deformation and other mechanical characteristics as the results. In the finite element analysis deformation, heat transfer, phase transformation and diffusion effects are taken into consideration. The carburizing process of a lock gear, a part of the car seat recliner, that is manufactured by the fine blanking process is adopted as the analysis model. The numerical results are discussed and partly compared with experimental data. And a combination of process parameters that is expected to give the highest surface hardness is proposed on the basis of this discussion.

• 한국결정성장학회지
• /
• 제12권4호
• /
• pp.210-214
• /
• 2002

$450^{\circ}C$ 이하에서 Cu를 이용한 전계 유도 방향성 결정화 공정을 통해 비정질 실리콘의 결정화 거동을 고찰하였다. 열처리와 동시에 전계를 인가하여 Cu가 증착된 패턴의 외부에서 Cu가 존재하지 않는 비정질 실리콘의 영역으로 측면 결정화를 유도하였다. 특히, Cu가 존재하지 않는 영역의 측면결정화는 (-) 전극 쪽에서 (+) 전극 쪽으로 방향성을 가지고 결정화가 진행되었다. 이러한 현상은 Cu와 Si가 반응 할 때, 주확산 종이 금속(Cu)이기 때문에 가능하다고 판단되었다. 또한, FALC 공정을 이용한 $350^{\circ}C$의 온도에서 결정화된 영역 내에 커다란 dendrites 형태의 가지가 형성되었고 전계 방향에 따른 측면 결정화가 진행되었음을 확인하였다. 결론적으로 $350^{\circ}C$의 매우 낮은 온도에서 30 V/cm의 전계 인가를 통해 12$\mu$m/h의 결정화 속도로 결정화가 가능함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.150-155
• /
• 2004

This study attempts to form a TiN barrier layer against Cu diffusion by the easier and more convenient method. In this new approach, Ti was sputter-deposited, and nitrided by heat-treating in the NH$_3$ambient. Sheet resistance of as-deposited Ti was 20 Ω/$\square$, but increased to 195 Ω/$\square$ after the heat-treatment at 30$0^{\circ}C$, and lowered to 120 Ω/$\square$ after the heat-treatment at 50$0^{\circ}C$, and $600^{\circ}C$. AES results for these thin films confirmed that the atomic ratio of Ti and N was close to 1:1 at or above 40$0^{\circ}C$ heat-treatment. However, it was also found that excessive oxygen was contained in the TiN layer. To examine the barrier property against Cu diffusion, 100nm Cu was deposited on the TiN layer and then annealed at 40$0^{\circ}C$ for 40 min.. Cu remained at the surface without diffusing into the Si layer.

• 대한금속재료학회지
• /
• 제50권11호
• /
• pp.809-815
• /
• 2012

Recently, as the interest in improving energy efficiency has grown, the demand for vehicle and machine parts that are resistant in high temperature corrosive conditions and abrasive environments has increased. Pack chromizing treatment of sintered steels is a profitable method that satisfies both corrosion resistance and low friction properties. Since austenitic stainless steels have good corrosion resistance but low mechanical hardness, if they are replaced by sintered steel parts with pack chromizing treatment, all the desirable properties such as low price, easy molding, high hardness, low frictional coefficient, and high corrosion resistance, can be obtained. The higher corrosion resistance of the chromized parts over that of the austenitic stainless steels was acquired by coating chromium carbides and a thin chromium oxides layer on the surface. Moreover, the surface morphology of chromized parts, which were composed of chromium rich phases and hardened chromium carbides by diffusing and alloying, had a peak-and-valley shape so that the dimple effect by the wrinkled morphology and high hardness induced a low friction coefficient.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.184-187
• /
• 1996

Diamod nucleation by mw assisted CVD was examined various conditions namely, (1) diamond nucleation on variour substrate materials, such as Si, cubic BN, pyrolytic BN and AIN, (2) AST(Activated species transport) method which promote nucleation of diamond on single crystal and polycrystalline alumina substrate was developed. (3) Effect of bias enhancement of nucleation on single crystalline Si was examined, and finally (4) DST (Double step treatment) method was developed to enhance diamond nucleation on Ni. In this method, we separated carbon diffusing process into Ni, carbon precipitating process from the inside of Ni and diamond precipitation process.

• 식품기술
• /
• 제18권2호
• /
• pp.99-108
• /
• 2005

As an alternative to gaseous sanitizer which having penetrating and diffusing capacities, aerosolsanitizer’s effect on killing pathogens was investigated. To test the efficacy of aerosolized sanitizer, peroxyacetic acid was aerosolized($5.42-11.42\mum$) by nebulizer(Royal-G Enterprise, ShenZhen,China) in a model cabinet against artificially inoculated target microorganisms on lettuce. Lettuceleaves were inoculated with a cocktail of three strains each of Escherichia coli O157:H7, Listeriamonocytogenes, and Salmonella Typhimurium and treated with sanitizer aerosol for 10 min, 30 and60 min in a model aerosol cabinet at room temperature($22\pm2^\circC$). After treatment, surviving cellsincluding injured cells were enumerated on appropriate selective agar or using the over-lay agar method, respectively. Inoculated lettuce leaves exposed to antimicrobial aerosol for 10 min experienceda 0.8 log reduction in E. coli O157:H7, a 0.3 log reduction in Salmonella Typhimurium and a 2.5 logreduction in L. monocytogenes when compared to the control. After 30 min treatment, the threepathogens were reduced in number of CFU by 2.2, 3.3, and 2.7-log and after 60 min, the reductions were 3.4, 4.5, and 3.8-log, respectively. Aerosolization can be new antimicrobial agents deliverysystem in food sanitizing.