• 소성∙가공
• /
• 제20권1호
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• 한국환경과학회지
• /
• 제27권8호
• /
• pp.621-629
• /
• 2018

Many chemically active species such as ${\cdot}H$, ${\cdot}OH$, $O_3$, $H_2O_2$, hydrated $e^-$, as well as ultraviolet rays, are produced by Dielectric Barrier Discharge (DBD) plasma in water and are widely use to remove non-biodegradable materials and deactivate microorganisms. As the plasma gas containing chemically active species that is generated from the plasma reaction has a short lifetime and low solubility in water, increasing the dissolution rate of this gas is an important challenge. To this end, the plasma gas and water within reactor were mixed using the air-automizing nozzle, and then, water-gas mixture was injected into water. The dissolving effect of plasma gas was indirectly confirmed by measuring the RNO (N-Dimethyl-4-nitrosoaniline, indicator of the formation of OH radical) solution. The plasma system consisted of an oxygen generator, a high-voltage power supply, a plasma generator and a liquid-gas mixing reactor. Experiments were conducted to examine the effects of location of air-automizing nozzle, flow rate of plasma gas, water circulation rate, and high-voltage on RNO degradation. The experimental results showed that the RNO removal efficiency of the air-automizing nozzle is 29.8% higher than the conventional diffuser. The nozzle position from water surface was not considered to be a major factor in the design and operation of the plasma reactor. The plasma gas flow rate and water circulation rate with the highest RNO removal rate were 3.5 L/min and 1.5 L/min, respectively. The ratio of the plasma gas flow rate to the water circulation rate for obtaining an RNO removal rate of over 95% was 1.67 ~ 4.00.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.828-833
• /
• 2014

본 연구는 이젝터 팽창기를 적용한 냉동기에서 팽창한 냉매가 액기분리기에 포집된 후, 이 중 포화기체의 일부는 이젝터로 재흡입되고, 포화액체는 증발기에 유입되어 증발된 후 액기분리기의 잔여 기체와 혼합되어 압축되는 공정을 고안하여 특성을 해석하였다. 본 공정의 특성은 이젝터에서 등엔트로피 팽창 후 액체량의 증가로 냉동능력이 증가하고, 압축기에 유입되는 기체의 압력이 상승하게 되어 압축일이 감소함으로써 효율이 증가하게 된다. 냉매 R134a를 적용하는 냉장고 시스템과 본 고안 시스템을 비교한 결과, 이젝터에서 압력이 65% 저하될 때 COP는 27.8%가 증가된 최대값이 되었다. 다른 냉매의 경우 R401A가 75% 압력강하에서 40.1%의 COP 증가를 보였다. 이젝터의 디퓨져에서의 압력 상승율이 20%~60%까지 변화될 때, COP 증가율은 2.6%~3%로 영향이 매우 적었다.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.25-30
• /
• 2014

자동차용 터보차저 원심압축기의 오버헝 볼류트의 두 가지 타입에 대한 유동장 특성이 수치적으로 연구되었다. 볼류트의 성능을 높이기 위해서는 높은 압력회복계수와 낮은 손실계수를 갖도록 함이 필요하다. 본 연구에서는 디퓨저 입구각을 $24^{\circ}$, 질량유량을 0.055 kg/s 로 유지하고 두 가지 타입의 오버헝 볼류트에 대한 유동장 특성을 조사하였다. 하나는 1 개의 원호로 이루어진 볼류트 단면(타입 1)이며, 다른 하나는 3 개의 원호로 이루어진 볼류트 단면(타입 2)이다. 타입 2 볼류트가 타입 1 볼류트 보다 원주방향 전체를 통틀어 높은 압력회복계수와 낮은 손실계수를 보여주었다.

• 대한기계학회논문집B
• /
• 제41권7호
• /
• pp.445-453
• /
• 2017

본 연구에서는 RO용 고압 다단 펌프의 수력 부 성능에 대해서 연구를 수행하였다. 수력 부 설계는 크게 임펠러 설계와 레이디얼 디퓨저 설계로 나뉠 수 있다. 임펠러의 자오면 형상 변화에 따른 유동분포와 성능을 수치 해석적으로 연구하였으며, 임펠러 외경, 출구 폭, eye dia 등은 고정시킨 상태에서 반응 표면 기법을 이용하여 허브 및 쉬라우드 자오면 곡선을 변화 시키면서 성능을 최적화하였다. 해석결과 양정에 가장 큰 영향을 미치는 설계 변수는 ${\varepsilon}Ds$로 나타났으며 효율은 허브 입구 길이 및 쉬라우드 곡선이 가장 큰 영향을 주는 것을 알 수 있었다. 자오면 프로파일을 변경한 결과 기준모델(case 25)에 비해 약 0.5% 효율이 개선됨을 확인할 수 있었다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.345-354
• /
• 2014

In this paper, effects of physical configurations and operating conditions on bubble column performance were analyzed in terms of bubble hydrodynamic and mass transfer parameters. Bubble column with 3 different dimensions and 7 gas diffusers (single / multiple orifice and rigid / flexible orifice) were applied. High speed camera and image analysis program were used for analyzing the bubble hydrodynamic parameters. The local liquid-side mass transfer coefficient ($k_L$) was estimated from the volumetric mass transfer coefficient ($k_La$) and the interfacial area (a), which was deduced from the bubble diameter ($D_B$) and the terminal bubble rising velocity ($U_B$). The result showed that the values of kLa and a increased with the superficial gas velocity (Vg) and the size of bubble column. Influences of gas diffuser physical property (orifice size, thickness and orifice number) can be proven on the generated bubble size and the mass transfer performance in bubble column. Concerning the variation of $k_L$ coefficients with bubble size, 3 zones (Zone A, B and C) can be observed. For Zone A and Zone C, a good agreement between the experimental and the predicted $K_L$ coefficients was obtained (average difference of ${\pm}15%$), whereas the inaccuracy result (of ${\pm}40%$) was found in Zone B. To enhance the high $k_La$ coefficient and absorption efficiency in bubble column, it was unnecessary to generate numerous fine bubbles at high superficial gas velocity since it causes high power consumption with the great decrease of $k_L$ coefficients.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권3호
• /
• pp.41-49
• /
• 2000

수역의 수질개선을 위하여 생활하수, 산업폐수를 처리할 때 주로 BOD 또는 COD를 저하시키는데 주안점을 두어왔으나 제거되지 않은 질소와 인의 유입으로 인하여 해역은 부영양화가 진행되고 있다. 따라서 향후 수질을 개선하기 위해서는 조류증식의 제한인자인 질소와 인의 처리가 필요하다. 고차처리를 적용할 경우보다 건설비용과 유지관리비가 적게 소요되는 해중방류(Ocean Outfall)을 적용하였을 때 그 효과를 검토하였다. 남부하수처리장 2차처리수를 해중 방류했을 때 수영만 전역에 미치는 영향을 far-field 모델인 생태-유체역학 모델을 이용하여 예측한 결과, 과거 남부하수처리수가 해수면에 유입되던 용호만의 수질은 많은 개선을 보였으나 방류관 주변에서 무기질소와 인의 농도가 해역환경기준 III등급으로 적조나 부영양화의 가능성이 있는 것으로 나타났다.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.23-28
• /
• 2011

In this study, the ejector design was modeled using Fluent 6.3 of FVM(Finite Volume Method) CFD(Computational Fluid Dynamics) techniques to resolve the flow dynamics in the ejector. A vacuum system with the ejector has been widely used because of its simple construction and easy maintenance. Ejector is the main part of the desalination system, of which designs determine the efficiency of system. The effects of the ejector was investigated geometry and the operating conditions in the hydraulic characteristics. The ejector consists mainly of a nozzle, suction chamber, mixing tube (throat), diffuser and draft tube. Liquid is supplied to the ejector nozzle, the fast liquid jet produced by the nozzle entrains and the non condensable gas was sucked into the mixing tube. The multiphase CFD modeling was carried out to determine the hydrodynamic characteristics of seawater-air ejector. Condition of the simulation was varied in entrance mass flow rate (1kg/s, 1.5kg/s, 2kg/s, 2.5kg/s, 3kg/s), and position of driving nozzle was located from the central axis of the suction at -10mm, 0mm, 10mm, 20mm, 30mm.. Asaresult, suction flow velocity has the highest value in central axis of the suction.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.92-99
• /
• 2010

The purpose of this study is to apply pressurized plenum under floor air conditioning system to office areas to understand characteristics of indoor thermal environment based on forms of diffusers. For doing this, the author conducted experiment of module measurement, and based on the results, analyzed indoor temperature distribution and velocity distribution based on direction of diffusion by using Computational Fluid Dynamics(CFD), and estimated the Predicted Mean Vote(PMV) of residents based on forms of diffusers to present the optimal air conditioning of the pressurized plenum under floor air conditioning system in heating. The results of this study are as follows. First, as for forms of diffusers, distributed diffusers rather than conical and grill diffusers were favorable in maintaining $24^{\circ}C$, the established temperature in heating, were active in velocity flowing, and were wide in a radius of diffusion. Second, as for position of pressurizing, the difference between upper and lower temperature was wider in center, lateral, and dispersed pressurizing (in order). As for velocity distribution, the velocity was more increased in lateral, center, and dispersed pressurizing(in order), indicating that dispersed pressurizing maintained uniform thermal environment. Third, as for diffusion direction, mixed direction showed less difference between upper and lower temperature and the difference in velocity between center and lateral part was 0.01m/1, indicating that it maintained uniform thermal environment. Fourth, as for the PMV of residents based on the forms of diffusers, the dispersed type showed(+) values above (0) when applied variably based on the position of diffuser, presenting thermal feeling of "being comfortable" to residents.

• 한국광학회지
• /
• 제19권2호
• /
• pp.122-126
• /
• 2008

본 논문에서는 단일 광원에 광분할 반사경을 집적하여 휴대폰의 디스플레이부와 키패드부에 동시 적용 가능한 통합형 듀얼 백라이트 유닛을 제안하고 구현하였다. 이 광분할 반사경은 상부 커버와 홈 모양의 하부 기판을 서로 정렬함으로써 구현되며, 반사경 좌우에는 도광판, 확산 쉬트, 프리즘 쉬트로 이루어진 도광 모듈이 연결되어 있다. 하부 기판의 중앙에 위치한 광원에서 방사된 광은 반사경 내부에서 다중 반사를 하면서 진행하고, 도광 모듈에 입사된 후 면광원으로 변환된다. 제작된 듀얼 백라이트 유닛의 측정 결과를 살펴보면, 키패드부에서의 평균 휘도 및 휘도 균일도는 각각 $420\;cd/m^2$와 69%, 디스플레이부에서는 $640\;cd/m^2$와 79%였다.