• 전기화학회지
• /
• 제14권4호
• /
• pp.225-230
• /
• 2011

Copper indium gallium selenide (CIGS) 기반 박막 태양전지는 저렴한 제작 단가 및 다른 박막 태양전지에 비해 높은 효율을 보여 실리콘 기반 태양전지의 차세대 태양전지로 각광을 받고 있다. 구성 요소 중 buffer 층은 window 층과 absorber 층 사이의 높은 밴드 갭(band gap)을 해소 해주는 역할을 한다. 기존의 cadmium sulfide(CdS)의 인체 유해성 때문에 이를 대신할 indium sulfide(In2S3)를 이용한 buffer 층의 연구가 활발히 진행되고 있다. 본 연구에서는 전기화학적인 방법을 통해 값싸고 간편하게 indium sulfide buffer 층을 전극 표면에 합성하는 연구를 진행하였다. Indium-Tin-Oxide(ITO) 전극표면을 sodium thiosulfate 및 indium sulfate의 혼합물 용액에 담그고 환원 전위를 인가하여 indium sulfide를 합성하였다. 크기가 다른 두 전압을 교대로 인가하여 확산 한계(diffusion limit)를 최소화 함으로써 표면에 균일한 조성을 가지는 buffer 층을 합성해 낼 수 있었다. 또한 합성 중 온도의 조절을 통해 buffer 층의 밴드 갭을 최적화 할 수 있었다. 이렇게 전기화학적으로 합성된 buffer 층은 X-선 광전자 분광법과 회절법의 분석을 통해 ${\beta}$-indium sulfide 결정구조를 가짐을 확인 하였다.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.57-62
• /
• 2008

Twelve mortars were mixed and tested to explore the effect of gypsum on the compressive strength development and shrinkage strain of alkali-activated mortars. Powder typed sodium silicate and ground granulated blast-furnace slag were employed as alkaline activator and source material, respectively, to produce cementless mortar. The main variables investigated were alkali quality coefficient combining the concentration of activator and main compositions in source material, and the adding amount of gypsum ranged between 1 and 5% with respect to the weight of binder. Initial flow, compressive strength development, modulus of rupture, and shrinkage strain behavior of mortar specimens were measured. In addition, the hydration production of alkali-activated pastes with gypsum was traced using X-ray diffraction and energy-dispersive X-ray analysis combined with scanning electron microscope image. Test results showed that the initial flow of slag-based alkali-activated mortar was little influenced by the adding amount of gypsum. On the other hand, the effect of gypsum on the compressive strength of mortar specimens was dependent on the alkali quality coefficient, indicating that the compressive strength increased with the increase of the adding amount of gypsum until a certain limit, beyond which the strength decreased slowly. Shrinkage strain of mortar tested was little influenced by the adding amount of gypsum because no ettringite as hydration product was generated. However, the adding of gypsum had a beneficial effect on reducing the microcrack in the alkali-activated mortar.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• 한국광학회지
• /
• 제9권3호
• /
• pp.134-141
• /
• 1998

원적외선인 7.6$\mu$m 과정대역에서 회절한계 성는을 만족하는 무초점 줌 망원경 광학계응 설계하였다. 기계보정식 4군 줌 방식을 적용하여 줌 대물부 설계하였으며 접안부는 고정초점 렌즈를 구성하였다. 망원경의 줌 비(zoom ratio)는 4.05로 배율을 2.0배에서 8.1배까지 연속적으로 가변할수 있으며, 총 5개의 렌즈군에 9매의 렌즈로 구성하였다. 줌 대물부는 F/1.3의 텔리포트 형태로 설계하여 최고배율 초점거리에 비해 광학계의 길이가 작아 시스템 적용성이 우수하도록 하였으며, 초점조절 렌즈를 줌밍 렌즈군의 뒤에 놓아 물체까지의 거리에 따라 초점을 조절하도록 설계하였다. 광학계에 사용된 재질은 색수차 보정을 위하여 대물부의 렌즈 1매만 ZnSe를 적용하고 나머지 헨즈는 모두 Ge을 적용하여\ulcorner며, 총 18면의 곡률중 1면만 비구면을 적용하고 나머지 면은 모주 구면을 적용하였다. 설계된 망원경의 8.1배율에서의 시야는 $\pm$2.31$^{\circ}$,대물부 유효구경은 163mm이며, 모든 배율에서 회절한계 성능을 만족하는 것으로 평가하였다.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.283-291
• /
• 2014

층상규산염광물 중 하나인 활석($Mg_3Si_4O_{10}(OH)_2$)은 경도가 매우 낮고, 산업분야에서 매우 다양하게 이용되는 재료물질이다. 실험에 이용한 활석은 외부가열열수고압기기를 이용하여 압력 200 MPa, 온도 $600^{\circ}C$인 조건하에서 합성한 분말시료이다. 포항가속기연구소에서 대칭다이아몬드 앤빌 기기와 방사광 및 각분산 X-선회절방법을 이용하여 상온에서 11.06 GPa까지 압축실험을 시행하였다. 본 실험의 압력 범위 내에서 상변이는 관찰하지 못하였다. 체적탄성률은 버치-머내한 상태방정식을 이용하여 72.4 GPa로 결정되었으며, 이 값은 천연산활석에 비해 낮은 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2226-2230
• /
• 2007

As a cathode material of lithium rechargeable batteries, charged Li[Co0.1Ni0.15Li0.2Mn0.55]O2 electrodes, which were aged thermally at 25 oC and 90 oC respectively, were characterized by means of charge/discharger, impedance spectroscopy, and X-ray diffraction. The discharge capacity diminution of the electrodes aged at 25 oC and 90 oC for 1 week was 4% and 23%, respectively. The cell aged at 25 oC was recovered on cycling. However, the capacity loss after ageing at 90 oC was not recovered in a subsequent cycling test, which demonstrates that the reaction occurring during ageing at 90 oC is irreversible. A significant impedance increase of aged electrode at 90 oC is associated with irreversible capacity loss. The structural changes including phase transformation were not detected by XRD analysis, because it could be due to out of detection limit. After ageing, impedance was slightly decreased during subsequent cycling test. It could be explained the cyclic performance of aged sample is stable. The thermal stability was not deteriorated by ageing even at the high temperature of 90 oC.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.197-204
• /
• 2019

An electrochemical oxygen permeating membrane (OPM) is fabricated using Zr_0.895Sc_0.095Ce_0.005Gd_0.005O_2-δ (ScCeGdZ) as the solid electrolyte and aLa_0.7Sr_0.3MnO₃-bScCeGdZ composite (LZab, electrode) as the electrode. The crystal phase of the electrode and the microstructure of the membrane is investigated with X-ray diffraction and scanning electron microscopy. The electrochemical resistance of the membrane is examined using 2-p ac impedance spectroscopy, and LZ55 shows the lowest electrode resistance among LZ82, LZ55 and LZ37. The oxygen permeation is studied with an oxygen permeation cell with a zirconia oxygen sensor. The oxygen flux of the OPM with LZ55 is nearly consistent with the theoretical value calculated from Faraday's Law below a critical current. However, it becomes saturated above the critical current due to the limit of the oxygen ionic conduction of the OPM. The OPM with LZ55 has a very high oxygen permeation flux of ~ 3.5 × 10^-6 mol/㎠s in I = 1.4 A/㎠.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.424-424
• /
• 2008

Dye-sensitized Solar Cell (DSC) is a new type of solar cell by using photocatalytic properties of $TiO_2$. The electric potential distribution in DSCs has played a major role in the operation of such cells. Models based on a built-in electric field which sets the upper limit for the open circuit voltage(Voc) and/or the possibility of a Schottky barrier at the interface between the mesoporous wide band gap semiconductor and the transparent conducting substrate have been presented. $TiO_2$ thin films were deposited on the FTO substrate by Nd:YAG Pulsed Laser Deposition(PLD) at room temperature and post-deposition annealing at $500^{\circ}C$ in flowing $O_2$ atmosphere for 1 hour. The structural properties of $TiO_2$ thin films have investigated by X-ray diffraction(XRD) and atomic force microscope(AFM). Thickness of $TiO_2$ thin films were controlled deference deposition time and measurement by scanning electron microscope(SEM). Then we manufactured a DSC unit cells and I-V and efficiency were tested using solar simulator.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.189-195
• /
• 2000

New concept of LNG-FPSO ship with moonpool and bilge step in bottom is considered and investigated in the point of motion reduction and sloshing phenomena of the cargo and operation tanks. The cargo capacity of the ship of which principle dimensions is L x B x D x t(design) =270.0 x 51.0 x 32.32 x 13.7(m) 16K at 98% loading condition. The two moonpools and rectangular step at bilge part are setted up specially for getting the effect of motion decrease. For the motion analysis, linearized three dimensional diffraction theory with the simplified boundary conditions is used. The six-degree of freedom coupled motion responses are calculated for the LNG-FPSO ship. Viscous effects on the roll motion responses of a vessel are taken into account in this calculation program using an empirical formula suggested by Ikeda, Himeno and Tanaka is used. The case study for the moonpool size had been carried out by theoretical estimation and experimental method. For the optimization of the moonpool size and effect of the step, 9 cases of its size and with and without step are considered. From the results of calculation and experiment, it can be concluded that this designed LNG-FPSO ship have possibility to carry out her missions in the rough sea as for the owner's demand waves condition. The motion responses, especially roll motion, for the designed LNG-FPSO ship are much lower than those of another drillship and shuttle tanker and limit criterions are satisfied. For the check of the cargo tank and operation tank sizes we have performed sloshing analysis in the irregular waves which focuses on the pressure distribution on the tank wall and the time history of pressure and free surface for No.2 and No5. tanks of LNG-FPSO with chamfers. Finally we got the tank size which has no resonance and no impact pressure in all filling in the bow quartering and beam sea.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.308-313
• /
• 2005

In this study the electrical conductivity of excess BaO in $BaTiO_3$ was measured to investigate the relationship between defects and solubility in the temperature range of $900^{\circ}C$ to $1300^{\circ}C$ under various oxygen partial pressure. First of all, quenched $BaTiO_3$ powders of various Ba/Ti ratios were analysed by X-ray diffraction to confirm whether second phase is formed or not. As the results, we observed the solubility of BaO in the temperature range of $1200^{\circ}C$ to $1400^{\circ}C$, and it was also found that the conductivity minima move to lower $PO_2$ with increasing excess BaO within solubility limit.