• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.318-325
• /
• 2003

The new biotelemetry method and system that the installation and the treatment of equipment is convenient and the instantaneously detailed position of the fish attached the pinger is able to track comparatively easily had been developed, an availabilities of it were verified in water tank by using hydrophone and pinger. First of all, the receiving system for biotelemetry was calibrated so as to measure tracking of high precision or wide detection range. In the next place, the precision at narrow and wide beam array of receiving system by using hydrophone was investigated and the actual position was compared with measured hydrophone position. The mean standard deviations of the position by narrow beam array of receiving system were 6.4em in phase beam of fore-aft pair and 6.3em in starboard-port pair, and the wide beam array were 24em and 23em respectively. The precision of distance, position, and velocity at narrow beam array of receiving system by using pinger were investigated and the actual values were compared with measured values. The distance from receiving system to pinger was measured by the pinger synchronizing method, angle of direction of pinger was detected by the super short base line (SSBL) method. The three dimensional position of pinger to the receiving system was measured by combining of two kinds of methods (SPB method), the velocity of pinger was obtained with a differential of the three dimensional positions. The mean standard deviations of the distance by pinger synchronizing method in narrow beam array of receiving system was 1. 8 em, that of the position by SPB method was 7.7cm.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.323-329
• /
• 2012

In order to investigate the rheological properties of myofibrillar protein (MP) mixed with tapioca starch (TS; 0, 1, and 2%) at various salt concentrations (0.1, 0.3, and 0.45 M), viscosity, gel strength, differential scanning calorimeter (DSC) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were measured. Viscosity of MP increased with increasing salt concentrations (p<0.05), but not with the addition of TS. The addition of TS improved gel strength and cooking yield at all salt concentrations (p<0.05). DSC results demonstrated that the starting peak of TS gelation was observed at $55^{\circ}C$, however, no differences in peak were observed with various salt and TS levels (p>0.05). SDS-PAGE profile also showed no differences in protein bands for pork myofibrillar protein with various salt and TS levels. Based on the model study, pork model sausages with various levels of tapioca (0, 1, and 2%) and TG (1%) were manufactured. The pork model sausages with 2% TS increased pH and water holding capacity (p<0.05), while those with TGase (1%) increased most textural properties, regardless of the addition of TS. Thus, the combination of 1% TG with 2% TS improved the gel strength and water holding capacity in the meat products.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2010

Recently, the effective use of closed waste landfill nearby urban areas has been demanded, because of the lack of the usable land. However, the reuse of closed landfill is needed an adequate stabilization of liner system. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetics liners in there. Liner system of waste landfills is an important facility which prevents leachate outgoing from the landfills and also groundwater infiltrating from surroundings into the landfills. During the waste disposal stage, differential settlement and tensile stress of the geosynthetic materials could occur due to impact load of trucks and dozers, waste loads and weak foundation soils. In this study, the tensile strength and tracer test were performed to evaluate the stability of geomembrane liner systems. Based on the tensile strength test result of in-situ geomembrane sample, the yield tensile strength maintain the suitable strength by specification and current law. However, according to the tracer test, the damage of geomembrane liner was detected on sanitary landfill section.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.805-811
• /
• 1996

Congenital cystic adenomatoid malformation of the Lung(CCAM) is characterized by anomalous fetal development of terminal respiratory structures, resulting in an adenomatoid proliferation of bronchiolar elements and cystic formation. CCAM was first described and differentiated from other cystic lung disease in the English literature by Ch'in and Tang in 1949. CCAN is a rare, potentially lethal form of congenital pulmonary cystic disease and the salient features of lesion are an irregular network of terminal respiratory bronchiole-like structures and macrocysts variably lined by pseudostratified ciliated columnar epithelium and simple cuboidal epithelium. Adult presentation of CCAM of the lung is so rare that only 9 cases have been reported in the literature of date. The pathogenesis of CCAM remains disputed and reseachers have variously proposed that the lesion represents a developmental anomaly, hamartoma, or a fonn of pulmonary dysplasia. Van Dijk and Wagenvoort divided CCAM into three subtypes : cystic, intermediated, and solid. These correspond to types I, II, and III of Stocker. In adults, the evaluation of cystic or multi cystic lung disease requires consideration of a differential diagnosis including the acquired lesions of lung abscess, cavitary neoplasm or inflammatory mass, bullous disease, bronchiectasis, and postionflammatory pneumatocele. Congenital lesions such as sequestration, bronchopulmonary-foregut anomalies, and bronchogenic cyst are also encounted. The definitive treatment for CCAM is complele removal of the involved lobe. Panial lobectomy leads to multiple complications, including severe post-operative infection. We report a case of CCAM in a 14-year-old female presentated with a pneumothorax and large bullae, who was treated by surgical remove of the involved lobe.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.408-413
• /
• 2010

Purpose : We aimed to prove the relative limitation of $^{99m}Tc-DMSA$ scintigraphy (DMSA) compared to computed tomography (CT) in diagnosing acute pyelonephritis (APN) in children. Methods : Since September 2006, after a 64-channel CT was imported, 10 DMSA false-negative patients have been identified: these patients underwent a CT scan for acute abdomen or acute febrile symptoms and were diagnosed as having APN; however, their DMSA scans were clear. We focused on these 10 DMSA false-negative patients and analyzed their clinical findings and CT results. We used Philips Brilliance Power 64-channel CT scanner for the CT scan and Siemens Orbitor Nuclear Camera 60 Hz for the DMSA scan. Results : The 10 DMSA false-negative patients were mostly males (80%) and infants (80%). They had fever for a mean of 1.1-day duration before admission and showed increase in acute reactants: leukocyte, erythrocyte sedimentation rate, and C-reactive protein. The CT findings of renal lesions were focal in 6 (60%) cases and diffuse in 4 (40%) cases, and most of the lesions were unilateral in 80% of patients. CT proved that 22 renal lesions were neglected by DMSA. Differential renal function test by DMSA was also of no use in the evaluation of renal lesions. Conclusion : In this study, DMSA scan showed limitation in finding renal cortical lesions of CT-proven APN patients. DMSA false-negative results seem to occur at early-phase disease of infantile age, but more prospective studies are needed to determine the reasons and their prevalence.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2014

In this study, we propose optimized RBFNNs based on night vision face recognition simulator with the aid of $(2D)^2$ PCA algorithm. It is difficult to obtain the night image for performing face recognition due to low brightness in case of image acquired through CCD camera at night. For this reason, a night vision camera is used to get images at night. Ada-Boost algorithm is also used for the detection of face images on both face and non-face image area. And the minimization of distortion phenomenon of the images is carried out by using the histogram equalization. These high-dimensional images are reduced to low-dimensional images by using $(2D)^2$ PCA algorithm. Face recognition is performed through polynomial-based RBFNNs classifier, and the essential design parameters of the classifiers are optimized by means of Differential Evolution(DE). The performance evaluation of the optimized RBFNNs based on $(2D)^2$ PCA is carried out with the aid of night vision face recognition system and IC&CI Lab data.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.685-696
• /
• 2015

This study intends to evaluate visual preference and image for 10 types of forest sceneries which have own distinct characteristics without overlapping each other among 22 types of beautiful forest sceneries based on Korea National Parks. Z scale and paired comparison methods were used to analyze visual preference for forest scenery, and SD scale method was also adopted to assess visual image for forest scenery. Experiments were conducted with 3 different university students groups. The results of this study can be summarized as follows. First, the evaluation results of Z scale (N=70) and paired comparison (N=64) methods show similar visual preference for different types of forest scenery. 'Scenery inside forests' and 'valley and rock' sceneries have the highest level of preference, and 'panorama of ridges', 'ridge of curious rock peaks', and 'waterfall and cliff' also have relatively higher preference level than others. However, 'community of dead trees' has the lowest preference in forest sceneries. Second, the factor analysis outputs of the image scores for beautiful forest scenery types by SD scale (N=66) show 3 factors of 'mysterious charm', 'colorful sense', and 'vividness/variety'. Examined the variables of forest scenery types for each factor, the image of 'mysterious charm' is based on the sceneries of mountain ridges, the image of 'colorful sense' is focused on the sceneries of color-expressed sense of the season, and the image of 'vividness/variety' is based on the sceneries of waterscape and curious rock peaks.

• Composites Research
• /
• v.28 no.6
• /
• pp.395-401
• /
• 2015

This study investigated the thermal stability of Grubbs' catalyst and its reactivity with self-healing agents for self-healing damage repair. Four types of Grubbs' catalyst supplied by manufacturers were considered and each catalyst was tested in as-received and grinded conditions. Four types of self-healing agents were prepared by varying the mixing ratio of dicyclopentadiene (DCPD) and 5-ethylidene-2-norbonene (ENB). Heat flows as a function of temperature were measured through a differential scanning calorimetry (DSC) to determine the thermal stability of catalysts. Reaction heats of self-healing agents with the catalyst were measured to evaluate the reactivity of the catalyst. For this evaluation, Fluka Chemika Grubbs' catalyst was used based on the maximum temperature and the time to reach the maximum temperature. According to the results, catalysts had different shapes depending on the manufacturer and the results showed that the smaller the size of the catalyst the higher the reactivity with self-healing agents. As the ENB ratio in self-healing agents increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. As the amount of the catalyst increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. Considering the thermal stability of the catalyst and its reactivity with the self-healing agent, combination of 0.5 wt% catalyst and the D3E1 self-healing agent was optimal for self-healing damage repair. Finally, as the thermal decomposition may occur depending on the environmental temperature, the catalyst must not be exposed to temperature higher than that is necessary to maintain the thermal stability of the catalyst.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.87-93
• /
• 1985

Intraabdommal abscess usually causes distress with fever, leukocytosis, pain and toxicity. Diagnosis of intraabdominal abscess is occasionally difficult and It has high morbidity. However radiologic method, such as ultrasonography, CT scan, or RI scan are helpful to early detection of intraabdominal abscess. Among these methods, ultrasonography is a non-invasive technique and performed without discomfort to patient. And also differential diagnosis between cystic and solid lesion is very easy and sequential ultrasonography in same patient is valuable for the evaluation of treatment effect. We analyzed the ultrasonic features of 48 cases with intra-abdominal abscesses and the results are as follows; 1. In total 48 cases, the intra-abdominal abscesses were 30 cases, the retroperitoneal abscesses, 5 cases, and the visceral abscesses, 13 cases. 2. The causes of the intra-abdominal abscesses were perforating appendicitis (25 cases), postoperative complications (5 cases), pyogenic and amebic hepatic abscesses (13 cases), and the others (5 cases). 3. Round or oval shaped lesions were 26 cases (54%), irregular shape, 18 cases (38%), and multiple abscess formation in 4 cases (8 %). 4. The size of the lesions were between 5 and 10cm in diameter in 54% of total 48 cases, and the most frequent feature of the echo-pattern of the lesions was cystic with or without internal echogenicity (69%).

• Journal of the Korean Chemical Society
• /
• v.64 no.5
• /
• pp.249-258
• /
• 2020

The potential use of egg shell and calcined egg shell as adsorbent was evaluated and compared to remove Cd²⁺ from aqueous solution. The samples were characterized using Thermogravimetry and Differential Thermal Analysis (TG/DTA), Scanning Electron Microscope (SEM), X-ray Diffractometer (XRD), Energy Dispersive X-ray Spectrometer (EDX) and BET Surface Analyzer. The batch-type adsorption experiment was conducted by varying diverse variables such as contact time, pH, initial Cd²⁺ concentrations and adsorbent dosage. The results showed that, under the initial Cd²⁺ concentrations ranged from 25 to 200 mg g^-1, the removal efficiencies of Cd²⁺ by egg shell powder (ESP) were decreased steadily from 96.72% to 22.89% with increase in the initial Cd²⁺ concentration at 2.5 g of dosage and 8 h of contact time. However, on the contrary to this, calcined egg shell powder (CESP) showed removal efficiencies above 99% regardless of initial Cd²⁺ concentration. The difference in the adsorption behavior of Cd²⁺ may be explained due to the different pH values of ESP and CESP in solution. Cd²⁺ seems to be efficiently removed from aqueous solution by using the CESP with a basicity nature of around pH 12. It was also observed that an optimum dosage of ESP and CESP for nearly complete removal of Cd²⁺ from aqueous solution is approximately 5.0 g and 1.0 g, respectively. Consequently, Cd²⁺ is more favorably adsorbed on CESP than ESP in the studied conditions. Adsorption data were applied by the pseudo-first-order and pseudo-second-order kinetics models and Freundlich and Langmuir isotherm models, respectively. With regard to adsorption kinetics tests, the pseudo-second-order kinetics was more suitable for ESP and CESP. The adsorption pattern of Cd²⁺ by ESP was better fitted to Langmuir isotherm model. However, by contrast with ESP, CESP was described by Freundlich isotherm model well.