• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.375-380
• /
• 2017

A differential current-to-time interval converter is presented for current mode sensors. It consists of a ramp voltage generator, a current mode sensor, a reference current source, two current-tunable Schmitt triggers, a one-shot multivibrator, and two logic gates. The design principle is to apply a ramp voltage to each input of the two current-tunable Schmitt triggers whose threshold voltages are proportional to the drain current values of the current mode sensors. A proposed circuit converts a current change in the ISFET biosensor into its equivalent pulse width change. A prototype circuit built using TSMC 0.18 nm CMOS process exhibit a conversion sensitivity amounting to $726.9{\mu}s/pH$ over pH variation range of 2-12 and a linearity error less than ${\pm}0.05%$.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2015

A resistance deviation-to-time interval converter based on dual-slope integration using second generation current conveyors (CCIIs) is designed for connecting resistive bridge sensors with a digital system. It consists of a differential integrator using CCIIs, a voltage comparator, and a digital control logic for controlling four analog switches. Experimental results exhibit that a conversion sensitivity amounts to $15.56{\mu}s/{\Omega}$ over the resistance deviation range of $0-200{\Omega}$ and its linearity error is less than ${\pm}0.02%$. Its temperature stability is less than $220ppm/^{\circ}C$ in the temperature range of $-25-85^{\circ}C$. Power dissipation of the converter is 60.2 mW.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.125-126
• /
• 2008

A differential capacitance deviation-to-time converter for interfacing position sensor is presented. It consists of triaxial position sensor, six comparators, six current mirrors, and control logic. The prototype differential capacitance deviation-to-time interval converter has been simulated using Chartered $0.35-{\mu}m$ CMOS parameters. The simulation results show that the maximum conversion time of the converter is $350{\mu}s$ and the linearity error is less than ${\pm}0.00l5%$.