• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.454-459
• /
• 2010

This study investigated the applicability of manganese coated media such as manganese coated sand (MCS), manganese coated sericite (MCSe) and manganese coated starfish material calcined at $550^{\circ}C$ (MCSf) to remove Mn(II) in synthetic wastewater. Manganese coated media prepared at different pH was applied in the treatment of soluble Mn(II) in batch and column experiments at various Mn(II) concentrations. The amount of Mn coated on three different media was approximately 800~1100 mg/kg. From the stability test, negligible dissolution of Mn was observed above pH 3.0. In batch test, more than 40% of Mn(II) was removed by all sand media at various manganese concentrations. In order to see the effect of additional oxidant for the removal of Mn(II), 4 mg/L of hypochlorite was added in Mn(II) solution during column experiment. Breakthrough of Mn(II) was greatly retarded in the presence of hypochlorite in all column reactors packed with different media. Among the manganese coated media, MCSf prepared at pH 4 indicated the highest removal capacity. The removal efficiency of Mn(II) was also increased in the multi-layer system (0.5 g of MCS, MCSe, and MCSf each).

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.375-382
• /
• 2003

Porous media consist of physically and chemically different materials and have an extremely complicated behavior due to the different material properties of each of its constituents. In addition, the internal structure of porous media has generally a complex geometry that makes the description of its mechanical behavior quite complex. Thus, in order to describe and clarify the deformation behavior of porous media, constitutive models for deformation of porous media coupling several effects such as flow of fluids of thermodynamical change need to be developed in frame of Arbitrary Lagrangian Eulerian (ALE) description. The aim of ALE formulations is to maximize the advantages of Lagrangian and Eulerian methods, and to minimize the disadvantages. Therefore, this method is appropriate for the analysis of porous media that are considered for the behavior of solids and fluids. First of all, governing equations for saturated porous media based on ALE description are derived. Then, weak forms of these equations are obtained in order to implement numerical method using finite element method. Finally, Petrov-Galerkin method Is applied to develop finite element formulation.

• Mycobiology
• /
• v.45 no.3
• /
• pp.172-177
• /
• 2017

The genus Paxillus is characterized by the difficulty of species identification, which results in reproducibility problems, as well as the need for large quantities of fungal inoculum. In particular, studies of Paxillus ammoniavirescens have reported divergent results in the in vitro growth while little is known of its capacity to degrade organic matter. For all the above, and assuming that this variability could be due to an inappropriate culture media, the aim of this study was to analyse growth in different culture media (MMN, MS, and 1/2 MS) and in the case of MMN in presence/absence of two types of organic matter (fresh litter and senescence litter) to probe the saprophytic ability of P. ammoniavirescens. We also evaluated the effects of pH changes in the culture media. Growth kinetics was assessed by weekly quantification of the area of growth in solid culture media over 5 wk, calculating the growth curves and inflection points of each culture media. In addition, final biomass after 5 wk in the different culture media was calculated. Results showed that best culture media are MS and 1/2 MS. Moreover, an improvement in growth in culture media containing decomposing fall litter was observed, leading to confirm differences in the culture media of this species with others of the same genus. Further, we established that all growth media suffered a significant acidification after fungal growth.

• The Korean Journal of Zoology
• /
• v.30 no.2
• /
• pp.99-106
• /
• 1987

It is the purpose to investigate the physiological toxity and mutagenicity by heavy metal compounds such as potasium dichromate, sodium arsenite and selenium dioxide on the development of Drosophila melanogaster. These chemical compounds were highly toxic at every developmental stage of Drosophila. The relative values of fecundity, viability and developmental time obtained on food media containing 5 different levels of potasium dichromate (500, 600, 700, 800, and 900 ppm), also 5 different levels of sodium arsenite and selenium dioxide (10, 15, 20, 25 and 30 ppm). Resulting in the relative values of fecundity and viability generally decreased, on the contrary developmental time generally reduced as the concentration of chemicals in the food increased. A significant reduction in the fecundity was observed between 800 and 900 ppm (p<0. 01) on the potasium dichromate media, between 15 and 20 ppm (p<0. 05) on the sodium arsenite media, between 20 and 25 ppm (p<0. 02) on the selenium dioxide media. A significant reduction in the viability was observed between 700 and 800 ppm (p<0. 01) on the potasium dioxide media, between 25 and 30 ppm (p<0. 01) on the sodium arsenite media, between 20 and 25 ppm (p<0. 01) on the selenium dioxide media. The developmental time was significantly reduced between 800 and 900 ppm (p<0. 001) on the potasium dioxide media, between 15 and 20 ppm (p<0. 001) on the sodium arsenite media, and between 25 and 30 ppm (p<0. 01) on the selenium dioxide media.

• The Korean Journal of Zoology
• /
• v.30 no.2
• /
• pp.107-116
• /
• 1987

It is the purpose to investigate the physiological toxity and mutagenicity by heavy metal compounds such as potasium dichromate, sodium arsenite and selenium dioxide on the development of Drosophila melanogaster. These chemical compounds were highly toxic at every developmental stage of Drosophila. The relative values of fecundity, viability and developmental time obtained on food media containing 5 different levels of potasium dichromate (500, 600, 700, 800, and 900 ppm), also 5 different levels of sodium arsenite and selenium dioxide (10, 15, 20, 25 and 30 ppm). Resulting in the relative values of fecundity and viability generally decreased, on the contrary developmental time generally reduced as the concentration of chemicals in the food increased. A significant reduction in the fecundity was observed between 800 and 900 ppm (p<0. 01) on the potasium dichromate media, between 15 and 20 ppm (p<0. 05) on the sodium arsenite media, between 20 and 25 ppm (p<0. 02) on the selenium dioxide media. A significant reduction in the viability was observed between 700 and 800 ppm (p<0. 01) on the potasium dioxide media, between 25 and 30 ppm (p<0. 01) on the sodium arsenite media, between 20 and 25 ppm (p<0. 01) on the selenium dioxide media. The developmental time was significantly reduced between 800 and 900 ppm (p<0. 001) on the potasium dioxide media, between 15 and 20 ppm (p<0. 001) on the sodium arsenite media, and between 25 and 30 ppm (p<0. 01) on the selenium dioxide media.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.360-363
• /
• 2009

Variation of viewing position of the observer is one of factors of image distortion in the stereoscopic display. A rotation movement of the observer makes the stereoscopic image distortion and that is caused by different horizontal position of each eye of the observer. It is different from horizontal and depth directional movement of the observer. In this paper, we showed the numerical simulation result about the distortion analysis and the correction of the stereoscopic image in rotation movement of the observer.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.93-104
• /
• 2003

Porous media consist of physically and chemically different materials and have an extremely complicated behavior due to the different material properties of each of its constituents. In addition, the internal structure of porous materials has generally a complex geometry that makes the description of its mechanical behavior quite complex. Thus, classical continuum mechanics cannot explain the behavior of materials with pore spaces, such as concrete, soils and organic materials in waste landfill. For these reasons, porous media theory has been developed in the nineteenth century. Biot had the greatest influence on the development of porous media theory. Biot's work has been referred by many authors in the literature. Development of numerous fundamental equations in porous media theory were made possible due to Biot's work. His contributions made the greatest influence on porous media theory. Therefore, it is highly advantageous to review Biot's publications. This work presents a review of Biot's work. It shows how porous media theory has been developing so far and provides a chance to discuss the contribution of his work to the modern porous media theory.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.155-160
• /
• 2007

Constructed wetland has been widely used for the treatment of sewage, stormwater runoff, industrial wastewater, agricultural runoff, acid mine drainage and landfill leachate. For the removal of nitrogen and phosphorus, uptake by plants and adsorption to media material are the major processes, and, therefore, the selection of media with specific adsorption capacity is the critical factor for the optimal design of wetland along with the selection of appropriate plant species. In this study, two media materials (loess bead and mixed media) possessing different adsorption characteristics for ammonium and phosphate were selected, and their adsorption characteristics were evaluated. In addition, the performance of subsurface-flow wetland systems employing these media was evaluated in both batch and continuous flow systems. With LB medium, beter phosphorus removal was observed, while better ammonia removal was obtained with MM medium. In addition, enhanced removal efficiencies were observed in the wetland systems employing both media and aquatic plants, mainly due to the better environment for microbial growth. As a result, appropriate selection or combination of media with respect to the inflow water quality maybe important factors for the successful design and operation of wetland systems.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.6.1-6.16
• /
• 2024

Objectives: This study aimed to investigate the elemental analysis and microhardness of a bioactive material (Activa) and marginal tooth structure after storage in different media. Materials and Methods: Fifteen teeth received cervical restorations with occlusal enamel and gingival dentin margins using the tested material bonded with a universal adhesive, 5 of them on the 4 axial surfaces and the other 10 on only the 2 proximal surfaces. The first 5 teeth were sectioned into 4 restorations each, then stored in 4 different media; deionized water, Dulbecco's phosphate buffered saline (DPBS), Tris buffer, and saliva. The storage period for deionized water was 24 hours while it was 3 months for the other media. Each part was analyzed by scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analysis for different substrates/distances and the wt% of calcium, phosphorus, silica, and fluoride were calculated. The other 10 teeth were sectioned across the restoration, stored in either Tris buffer or saliva for 24 hours or 3 months, and were evaluated for microhardness of different substrates/areas. Data were analyzed using analysis of variance and Tukey's post hoc test. Results: Enamel and dentin interfaces in the DPBS group exhibited a significant increase in calcium and phosphorus wt%. Both silica and fluoride significantly increased in tooth structure up to a distance of 75 ㎛ in the 3-month-media groups than the immediate group. Storage media did not affect the microhardness values. Conclusions: SEM-EDS analysis suggests an ion movement between Activa and tooth structure through a universal adhesive while stored in DPBS.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.203-206
• /
• 2009

This paper represents an efficient algorithm to segment objects from the background using multiple images of distinct luminous intensities. The proposed algorithm obtains images with different luminous intensities using a camera flash. From the multiple intensities for a pixel, a saturated luminous intensity is estimated together with the slope of intensity rate. Then, we measure the sensitivities of pixels from their slopes. The sensitivities show different patterns according to the distances from the light source. Therefore, the proposed algorithm segments near objects using the sensitivity information by minimizing an energy function. Experimental results on various objects show that the proposed algorithm provides accurate results without any user interaction.