• 제목/요약/키워드: different mash

검색결과 111건 처리시간 0.027초

매쉬심 용접판재의 성형 특성에 관한 실험적 연구 (An Experimental Study for Forming Characteristics of Mash Seam Welding Sheets)

  • 이명호;신외경;금영탁;황보원;유동열
    • 소성∙가공
    • /
    • 제9권6호
    • /
    • pp.582-589
    • /
    • 2000
  • In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Mash seam welding shows an overlap joint, a much wider welding area, and heat affected zone(HAZ) than a laser welding. This paper deals with the forming characteristics of mash seam welded tailored blanks. Mash seam welded blanks of same or different thickness combinations were prepared, and tensile, hardness, erichsen, and dome stretching tests were done.

  • PDF

밀가루 입국과 유산균을 이용하여 만든 Seed mash를 첨가한 발효액종의 특성 (Characteristics of Flour Ferment with Seed Mash Containing Wheat Flour Koji and Lactic Acid Bacteria)

  • 이명구;강상모;이시경
    • Applied Biological Chemistry
    • /
    • 제49권2호
    • /
    • pp.97-102
    • /
    • 2006
  • 빵의 노화와 풍미 향상을 목적으로 빵 제조시 첨가하기 위하여 제조한 유산균, 효모, seed mash을 첨가하여 배양한 발효액종(flour ferment)의 특성을 조사한 결과는 다음과 같다. Seed mash를 첨가하지 않은 발효액종은 배양 6시간 경과시 pH와 TTA가 각각 5.6 및 2.5이었으며, seed mash 5%와 각기 다른 유산균을 첨가한 발효액종은 pH가 4.63-4.69와 TTA가 9.0-9.9이었다. 4시간 발효시킨 발효액종에 함유된 유기산은 대조구의 경우 프로피온산이 0.09mg/g, 젖산과 초산이 각각 0.06 및 0.04 mg/g 검출되었으며, seed mash와 효모만을 발효시킨 발효액종에서는 프로피온산이 0.21 mg/g, 젖산과 초산이 각각 0.16, 0.06 mg/g, seed mash와 유산균, 효모를 혼합 배양한 발효액종에서는 젖산이 0.23-0.27 mg/g으로 가장 높았으며, 프로피온산이 0.21 mg/g, 초산이 0.06-0.08 mg/g 검출되었다. 발효액종의 향기성분은 seed mash, 효모, 유산균을 혼합 배양한 발효액종에서 ethyl caprylate, ethyl caproate, ethyl acetate, ethyl caprate, phenylethyl acetate등의 에스테르 화합물이 대조구에서 보다 많이 검출되었다.

원료(原料)를 달리 하는 탁주숙성요중의 유기산(有機酸) 및 당류(糖類)의 검색(檢索)에 관(關)한 연구(硏究) (Studies on the Identification of organic acids and sugars in the fermented mash of the Takju made from different raw-materials)

  • 정지흔
    • Applied Biological Chemistry
    • /
    • 제8권
    • /
    • pp.39-43
    • /
    • 1967
  • 원료(原料)를 달리하는 탁주숙성요중 일반성분(一般成分)과 paper chromatography method에 의(依)한 유기산(有機酸) 당류(糖類)를 검출(檢出)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 전당합량(全糖含量)이 가장 많은 전분(澱粉)으로된 전분숙성요중에 주정량(酒精量)이 가장 많았다. 2. 유기산(有機酸)은 백미요중에 lactic acetic succinic fumaric malic citrle acid 6 종(種)이 들어있어 가장 많고 따라서 유기산함량(有機酸含量)에 따라 탁주풍미(濁酒風味)가 좌우(左右)됨을 알수 있다. 3. 당(糖)의 종류(種類)는 원료중(原料中)에 총6종(總6種) glucose, sucrose fructose, maltose, raffinose, xylose 이고 숙성요중에는 이보다 적은 수(數)로 glucose, sucrose, fructose, xylose 4종(種)을 나타내고 있어서 원료중(原料中)에 더 많음을 알 수 있다. 4. 백미숙성요중에서 검출(檢出)된 유기산함량(有機酸含量)만큼 전분요나 소맥분요중에 유기산(有機酸)을 함유(含有)케함이 주질(酒質)를 향상(向上)시키는 방법(方法)이라고 생각된다.

  • PDF

개량누룩에 의한 탁주양조중 미생물과 중요성분 변화 (Changes in microorganisms and Min Components during Takju Brewing by a Modified nuruk)

  • 이명숙
    • 한국식품영양학회지
    • /
    • 제12권3호
    • /
    • pp.226-232
    • /
    • 1999
  • To evaluate the characteristics of modified nuruk made by inoculation and cultivation of Rhizopus jap-onicus T2, Aspergillus oryzae L2 and hansenula sp. BC26 three different Takju mashes were made with modified Nuruk commercial Nuruk and rice koji and the changes in microorganisms and major compon-ents of mashes were investigated uring brewing. The numbers of yeast kept higher in the mash of mod-ified Nuruk or rice koji. The numbers of lactic acid bacteria were high in mash of commercial Nuruk but those were not in mash of modified Nuruk or rice koji. all mashes showed stable pH in a day and the pH kept higher in mash of modified Nuruk than in that of commer-cial Nuruk or rice koji. Increase in the content of total acid was moderate in mash of modified Nuruk or rice koji but it was too much in that of commercial Nuruk. increase in the content of amino acid was much highr in mash of modified Nuruk or commercial Nuruk than in that of rice koji. Increase in the content of alcohol was more rapid in mash of modified nuruk or rice koji than in that of commercial Nur-uk. The content of reducing sugar kept highter in mash of commercial Nuruk or modified Nuruk than in that of rice koji. A small amount of modified Nuruk accomplished favorable fermentation showing nor-mal patterns in microbiological and physicochemical changes during brewing.

  • PDF

매쉬심 합체박판을 이용한 자동차 Bumper beam의 성형기술에 관한 연구 (The study for the forming technology of Automobile Bumper beam using the Tailored Blank of Mash Seam Welding)

  • 신외경;이수홍;김은석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1376-1380
    • /
    • 2005
  • In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Tailored blank(TB) welding is a production method for blanks involving welding together materials of different quality, thickness, and coating, and has proved popular in fabrication automotive parts. This paper deals with the forming characteristics of mash seam welded tailored blanks. Using these forming characteristics, the bumper beam was developed using the mash seam welded tailored blank with the different thickness. We performed the forming simulation with respect to strain distribution on blank during the stamping of the bumper rail part. Based on these results, we made some stamping tryouts with selected types of blank designs to investigate the formability of tailored blank with different thickness. During the tryouts, we knew that it was important the BHF(Blank Holding Force). We obtained to reducing 10.5% weight and cost with adapting the bumper beam of automotive component using the tailored blank of mash seam welding.

  • PDF

진피첨가량을 달리한 진피주의 발효특성 (Fermentation Characteristics of Ginpi Wine with Different Levels of Added Ginpi)

  • 김나영;유아름;민진영;한명주
    • 한국식생활문화학회지
    • /
    • 제26권2호
    • /
    • pp.178-183
    • /
    • 2011
  • The objective of this study was to determine the quality and sensory characteristics of ginpi wine using different levels of ginpi at each fermentation step. In the first mash with or without ginpi, lactic acid bacteria and yeast counts were maximum between days 2 and 3 of fermentation. The reducing sugar content increased after 2 days of fermentation of the first mash. Brix content increased rapidly after 1 day of fermentation, but pH decreased rapidly. After 3 days of fermentation of the second mash, 0, 30, 60, or 90 g of ginpi were added, and the yeast counts were 8.89, 8.72, 8.81, and 8.88 \log CFU/mL, respectively but then continually decreased. After 3 days of ginpi wine fermentation of the second mash, the addition of 0, 30, 60, 90 g ginpi resulted in alcohol content of 11.40, 8.90, 9.40, and 8.95%, respectively, and after 3 days of fermentation, alcohol content increased slightly. The results of a sensory evaluation showed that overall acceptability of ginpi wine was not different with different levels of added ginpi. However, the flavor of the 90 g ginpi wine had the highest acceptability.

쌀당화액 첨가량에 따른 딸기잼의 품질특성 (Effect of rice mash on the quality characteristics of strawberry jam)

  • 김미진;김진숙;장영은
    • 한국식품저장유통학회지
    • /
    • 제22권6호
    • /
    • pp.817-822
    • /
    • 2015
  • 본 연구에서는 쌀과 쌀누룩(rice koji)을 이용하여 당화과정을 거쳐 생성된 쌀당화액(rice mash)은 당도와 유기산을 가진 잼 제조의 원료로 활용하고자 딸기와 설탕의 첨가수준 대비 rice mash 첨가량을 0%, 14%, 21%로 달리하여 제조한 딸기잼의 이화학적 및 관능적 특성을 조사하였다. Rice mash 첨가량이 증가할수록 딸기잼의 당도 및 총산도는 유의적으로 낮아지는 경향이었다(p<0.05). 색도는 rice mash 첨가수준이 증가할수록 L, a 및 b값 모두 증가하였다. 또한 딸기잼의 유리당으로 fructose, glucose, sucrose 및 maltose가 검출되었으며, glucose 함량은 rice mash 첨가량이 증가할수록 3.86~4.13 g으로 증가된 반면 fructose, sucrose 및 maltose 함량은 이와 다르게 감소되었다(p<0.05). 처리구에서 검출된 유기산은 oxalic acid, citric acid, malic acid 및 succinic acid였으며, oxalic acid는 대조구에서는 검출되지 않았다. Succinic acid는 당화액 첨가수준이 많아질수록 증가하였다(p<0.05). Rice mash 첨가량에 따른 딸기잼의 관능검사 결과 색, 맛 항목에서는 rice mash를 첨가하지 않은 대조구를 가장 선호하는 것으로 나타났다. 냄새, 질감(texture), 스프레드(spread)의 경우에는 모든 처리구간에 유의적 차이를 보이지 않았다. 전반적 기호도는 기존의 설탕잼의 단맛에 익숙하여 rice mash를 첨가하지 않은 대조구가 점수가 높았지만 rice mash 14% 첨가 처리구(SJ14)와는 유의적인 차이를 보이지 않았다. 이상의 결과를 종합해 볼때 당과 산을 생성하는 rice mash를 설탕 대체 또는 산 조절제로 이용하여 기존 잼의 당도를 낮추며 품질을 높일 수 있을 것으로 기대되는 바, 건강지향 요구에 따른 새로운 잼 제품을 개발하는데 유용한 정보로 사용될 수 있을 것으로 보인다.

매쉬-심 용접 판재의 성형 한계 (Forming Limit of Mash-seam Welded Sheets)

  • 김형목;허영무;양대호;서대교
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1997년도 춘계학술대회논문집
    • /
    • pp.222-225
    • /
    • 1997
  • This paper describes experimental investigation on the forming limit for mash-seam welded sheets. The uniaxial tensile test was conducted to evaluate the mechanical properties of weld bead. Experimental forming limit diagrams were investigated for the different thicknesses and properties of welded sheets.

  • PDF

한국(韓國) 전통소주(傳統燒酒) (진도홍주(珍島紅酒)) 제조(製造)에 관(關)한 연구(硏究) -제1보. 제조방법에 따른 홍주 발효술덧의 성분변화- (Studies on the Processing of Korean Traditional So-Ju, Jindo-Hongju -I. Changes in Components of Hong-ju Mash Fermented by Different Methods-)

  • 김용순;강성훈;정지흔
    • 한국식생활문화학회지
    • /
    • 제6권3호
    • /
    • pp.245-249
    • /
    • 1991
  • This study was conducted to establish traditional manufacturing process of Hongju, a traditional spirit by traditional Kokja and Koji method based on different materials. In the fermentation process, the changes of temperature, pH, total acid, alcohol, total sugar and microflora in mash were analyzed. During the whole fermentation period, the temperature in mash made by Kokja method was reached to $30^{\circ}C$, and that of Koji method was reached $33^{\circ}C$. There was no significant difference in pH by different treatments and the initial pH in Koji method was pH 6.0 and the final pH was 4.0. The content of total acid was higher in mash processed by Kokja method than that of Koji method. Alcohol content was higher in mash processed by Koji method. The content of total sugar in all samples were reduced gradually according to progress of fermentation. Yeast populations in all samples were increased up to 6 days of fermentation and then decreased gradually. Lactic acid bacteria were increased until 3 days of fermentation and then decreased until the fermentation completed.

  • PDF

극저탄소강의 Mash Seam TB 용접성 평가에 관한 연구 (A Study on Weldability Criteria of Mash Seam Tailored Blank Welds in the Ultra-low Carbon Steel Applied on Automotive Body)

  • 한창우;이창희;이명호
    • Journal of Welding and Joining
    • /
    • 제20권4호
    • /
    • pp.538-543
    • /
    • 2002
  • M/S TB(Mash Seam Tailored Blank) is a production method for blanks by welding together blanks of different material, thickness and coating, and is an attractive method for manufacturing car body because it makes parts lighter and can save the cost and time to manufacture. However, there have not been quantified criteria to evaluate the quality of TB weld. This study introduced FHR (failure height ratio) in order to assess formability or/and weldability of the M/S welds and the applicability of FHR was confirmed by actual auto body forming and FLD tests. Furthermore, a new parameter, HN(heat number) based on the heat input of "$Q=I^2Rt$" was proposed and assessed. It was found that the concept of HN could be utilized to evaluate the soundness of M/S welds without any destructive tests.ive tests.