• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.233-238
• /
• 2017

This study was carried out to figure out the number of logs for sawtimber by DBH and height class and to compare merchantable volume ratio by categorizing into sawtimber, lagging board and pulpwood, and others for Pinus densiflora, Pinus koraiensis, and Larix kaempferi. Logs for sawtimber were hardly produced in small DBH class of three species, but produced evidently from medium DBH class. In large DBH class, the number of logs for sawtimber were noticeably different among species: 4.3 logs for L. kaempferi, 2.6 logs for P. densiflora, and 1.0 logs for P. koraiensis on average. Similarly, merchantable volume ratio for sawtimber were largely different among species in large DBH class with higher than 15 m: 82% logs for L. kaempferi, 60% logs for P. densiflora, and 44% logs for P. koraiensis. When compared to the upper diameter and upper height by species with regard to the last log of a tree produced for sawtimber, upper diameter was smallest with 14.1 cm and upper height was highest with 12.2 m in L. kaempferi. Overall, L. kaempferi was considered as the more commercial species for sawtimber production than P. densiflora and P. koraiensis.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.145-151
• /
• 1998

The purpose of this study was to investigate the related factors to child overweight through investigation of children aged 6-12. Data on physical examinations, family history and dietary habits were obtained. Children were classified into normal(98 persons) and overweight(118 persons) group using the combination of height for age, weight for age and weight for height standard by the World Health Organization. Children's height, weight and BMI exhibited a significant difference between groups except children aged 8 for height. Unbalanced diet was a risk factors for overweight(Odd ratio : 1.765, 95% CI : 1.022~3.048). Number of brothers showed negative significance especially in two brothers compared to that of one(Odd ratio : 0.456, 95% CI : 0.209~0.995). But Birth weight, feeding practice, overeating, taking nutrition pills, sleeping time, mother's education level and employmental status didn't have any difference. We found out there were different risk factors between obese and overweight group. They should be divided into different groups in studying risk factors. And we should pay much attention to overweight children in order to prevent improving to obesity.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.261-266
• /
• 2010

Human body is hard to be in perfect balance during walking. Most of time the trunk is supported by one leg and the center of mass(COM) falls to the contralateral side. Thus, dynamic variables such as the velocity of the COM should be considered when gait stability is evaluated. The purpose of this study was to investigate whether the extrapolated center of mass(XCom) which utilized the COM position and its velocity, is appropriate to evaluate gait stability. Ten healthy adults participated in this study and performed 3 different types of gaits(normal(NG), hands on waists(HWG), and hands on shoulders(HSG)) onto 4 different types of obstacle(obstacle height: 0%, 30%, 40% and 50% of leg length). Medio-lateral Com-CoP and XCom-CoP inclination angle were calculated during support phase. For all condition, greater M-L XCoM-CoP inclination angles were found(p<.05) compared with those of matched obstacle height CoM-CoP. Especially, M-L XCoM-CoP inclination angle at 50% height revealed the best condition for monitoring dynamic stability. Significantly increased in M-L XCoM-CoP inclination angle was found(p<.05) as obstacle height increased on NG and HWG.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.55-62
• /
• 2005

Combustion Characteristics and quenching criteria of micro combustor in various condition was exploited experimentally. Two different gases were used, and various geometric matrixes were considered to figure out quenching characteristic of micro combustor. The micro combustor studied in this study was constant volume, and has cylindrical shape. Geometric parameter of combustor was defined to be combustor height and diameter. The effect of height was exploited parametrically as 1 mm, 2mm and 3mm and the effect of diameter was parameterized to be 7.5mm and 15mm. Three different combustibles. (1) Stoichiometric mixture of methane and are, (2) Stoichiometric mixture of hydrogen and air and (3) Mixture of hydrogen and air with fuel stoichiometry of two were used. Pressure transition during combustion process was recovered. The ratio of maximum pressure to initial pressure responded favorably with the change of height of combustor and the initial pressure, the maximum pressure was also increased. The flame propagation was observed only when a specific condition was satisfied. From the experiment the condition that guarantees stable propagation of flame was tabulated. The tabulated results includes criteria of quenching according to combustor height, combustor diameter, species of fuel and initial pressure.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.479-486
• /
• 2010

The purpose of this study was to determine the effects of high-heeled shoe on the quiet standing and gait balance. Twenty women (mean height: $161.6{\pm}3.3\;cm$, mean body mass: $53.8{\pm}6.3\;kg$, mean age: $23.8{\pm}2.7$ yrs..) who were without history or complain of lower limb pain took part in this study. They were asked to stand quietly on a force platform for 30 sec and walk on it at their preferred walking speed (mean speed $3.14{\pm}0.5\;km/hr$.) with wearing three different high-heeled shoe, 3, 7, 9 cm high for collecting data. Data were randomly recorded to collect two trials for quiet standing and five trials for walking The parameters to have been analyzed for comparison between three conditions of the height of high-heeled shoe were COP(Center of Pressure) range, COP velocity, sway area, and free moment on the static balance and COP range, COP velocity, and free moment on the dynamic balance. In this study, high-heel height affected on the COP range and velocity in the ante-posterior direction during walking, dynamic balance, but didn't affect on the quiet standing, static balance.

• Steel and Composite Structures
• /
• v.38 no.6
• /
• pp.671-690
• /
• 2021

Seismic responses of RC core wall with two outriggers are investigated in this study. In the models analyzed here, one of the outriggers is fixed at the top of the building and the second is placed at different levels along the height of the system. Each of the systems resulting from the placement of the outrigger at different locations is designed according to the prescriptive codes. The location of the outrigger changes along the height. Linear design of all the structures is accomplished by using prescriptive codes. Buckling restrained braces (BRBs) are used in the outriggers and forward directivity near fault and far fault earthquake record sets are used at maximum considered earthquake (MCE) level. Results from nonlinear time history analysis demonstrate that BRB outriggers can change the seismic responses like force distribution and deformation demand of the RC core-walls over the height and lead to the new plastic hinge arrangement over the core-wall height. Plasticity extension in the RC core wall occurs at the base as well as adjacent to the outrigger levels. Considering the maximum inter-story drift ratio (IDR) demand as an engineering parameter, the best location for the second outrigger is at 0.75H, in which the maximum IDR at the region upper the second outrigger level is approximately equal to the corresponding value in the lower region.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.274-284
• /
• 2022

To use kenaf (Hibiscus cannabinus L.) as a fiber and livestock feed, a high-yielding variety needs to be identified. For this, accurate phenotyping of plant height is required for this breeding purpose due to the strong relationship between plant height and yield. Plant height can be estimated using RGB images from unmanned aerial vehicles (UAV-RGB) and photogrammetry based on Structure from Motion (SfM) algorithms. In kenaf, accurate measurement of height is limited because kenaf stems have high flexibility and its height is easily affected by wind, growing up to 3 ~ 4 m. Therefore, we aimed to identify a method suitable for the accurate estimation of plant height of kenaf and investigate the feasibility of using the UAV-RGB-derived plant height map. Height estimation derived from UAV-RGB was improved using multi-point calibration against the five different wooden structures with known heights (30, 60, 90, 120, and 150 cm). Using the proposed method, we analyzed the variation in temporal height of 23 kenaf cultivars. Our results demontrated that the actual and estimated heights were reliably comparable with the coefficient of determination (R²) of 0.80 and a slope of 0.94. This method enabled the effective identification of cultivars with significantly different heights at each growth stages.

• Physical Therapy Korea
• /
• v.8 no.2
• /
• pp.55-63
• /
• 2001

For spinal flexibility measurements to be meaningful to clinicians or researchers, they must have a normative information and an understanding of how different variables affect spinal range of motion (ROM). Normal spinal ROM measurements are influenced to differing degrees by many factors. These factors include age, gender, time of day, leisure activities, previous history of low back pain, warming up, and the techniques with which normative data are collected. The additional variables of standing height, ratio of standing height to sitting height, and obesity had not been previously studied extensively and were shown to have a significant effect on flexibility in the sagittal plane. These relationship cannot be explained easily. Thus, the purpose of this study was to determine the relationship between spinal flexibility and individual factors (weight, standing height, and ratio of standing height to sitting height) that influence it. Fifteen healthy subjects between the ages of 20 and 27 years were studied. Two physical therapists measured independently the spinal forward bending ROM in the sagittal plane by Remodified Schober test and Finger-to-floor test. In order to determine the statistical significance of the result the Pearson's correlation was applied at the .05 level of significance. The results of this study were as follows: 1) Significant relationship was not identified between spinal flexibility and weight. 2) Significant relationship was not identified between spinal flexibility and standing height. 3) Significant relationship was not identified between spinal flexibility and ratio of standing height to sitting height.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.147-155
• /
• 2006

For the further study of the solids flux theory, several researchers have proposed models to predict sludge settling velocity for each different concentration by using sludge indexes, SVI, SSVI and $SSVI_{3.5}$. It is difficult to apply the above models to predict sludge-water interface height in a batch column because sludge settling velocity changes while sludge settle down. While sludge settle down in a batch column, sludge concentration becomes high. The sludge concentration change is one of the most critical causes of the change of sludge settling velocity. Also, sludge concentration change causes of sludge index to change. SVI is more sensitive than SSVI or $SSVI_{3.5}$ to the change of sludge concentration. Each sludge has physical characteristics of its own which makes the settling velocity for each sludge different. The purpose of this study is to establish the correction factors that are able to compensate the errors derived from each different sludge settling characteristic by using sludge indexes, therefore the correction factors are applicable to the model for the change of sludge-water interface height.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.357-363
• /
• 2012

The purpose of this study was to investigate the effects of different saddle heights on lower-limb joint angle and muscle activity. Six elite cyclists(age: $32.2{\pm}5.2years$, height: $171.0{\pm}3.5cm$, weight: $79.7{\pm}5.6kg$, cycle career: $13{\pm}6.2years$) participated in three min. submaximal(90 rpm) pedaling tests with the same load and cadence based on saddle heights where subject's saddle height was determined by his knee flexion angle when the pedal crank was at the 6 o'clock position. Joint angles(hip, knee, ankle joints) and the activity of lower limb muscles(biceps femoris(BF), vastus lateralis(VL), tibialis anterior(TA) and gastrocnemius medial(GM)) were compared by measuring 3D motion and electromyography(EMG) data. Results showed that there were significant differences in minimum hip & knee joint angle and range of motion of hip and knee joint between saddle heights. Onset timing and integrated EMG of only BF among 4 muscles were significantly different between saddle heights. Especially there was a negative relationship between minimum hip joint angle and onset timing of BF in most subject, which means that onset timing of BF became fast as the degree of bending of the hip joint became larger by saddle height. Optimal pedaling will be possible through increased amount of muscle activation due to the appropriate burst onset timing by proper pedaling posture with adjusted saddle height.