• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.337-349
• /
• 2020

In this study, Helikite, Low Altitude Remote Sensing (LARS) platform, was used to acquire coastal images. In the obtained image, the land and water masses were divided using four types of region clustering algorithms, and then waterline was extracted using edge detection. Quantitative comparisons were not possible due to the lack of in-situ waterline data. But, based on the image of the infrared band where water masses and land are relatively clear, the waterlines extracted by each algorithm were compared. As a result, it was found that each algorithm differed significantly in the part where the distinction between water masses and land was ambiguous. This is considered to be a difference in the process of selecting the threshold value of the digital number that each algorithm uses to distinguish the regions. The extraction of waterlines through various algorithms is expected to be used in conjunction with a Low Altitude Remote Sensing system that can be continuously monitored in the future to explain the rapid changes in coastal shape through several years of long-term data from fixed areas.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.75-81
• /
• 2014

In this study, the biological activity of water and ethanol extracts from Saururus chinensis by ultra-fine grinding for functional food source are examined. It is more effective to use ethanol than water when extracting phenolic compounds. Approximately 2.5 times higher extraction yield were shown when it was ultra-fine grinded because the particle size decreases, thereby increasing the extraction yield. Normal grinded sample extracts showed 69.8% of DPPH inhibition effect, while fine grinded and ultra-fine grinded sample extracts showed 70.7% and 83.8% each, respectively. Normal extract, as well as fine grinded and ultra-fine grinded extracts, showed over 97% of ABTS inhibition effect, thereby indicating only a slight difference in the anti-oxidative activity with the grinding method. Higher PF was determined with fine grinded and ultra-fine grinded extracts than the normal grinded extract, while ultra-fine grinded 50% ethanol extracts showed the highest anti-oxidative activity value of 1.8 PF. The fine grinded and ultra-fine grinded particle sizes are smaller than the normal grinded particle size, thus increasing the inhibition rate of the TBARS. Furthermore, the ethanol extract was revealed to have a higher effect than the water extracts. The xanthin oxidase inhibition, on the other hand, was identified as ultra-fine grinded that led to the increase in the enzyme inhibition effect. In the angiotensin-converting enzyme, water extracts with normal grinding did not show inhibition activity, while 50% ethanol extracts showed 24% inhibition activity. Moreover, the ethanol extracts showed higher inhibition effect compared to the water extracts. Ultra-fine grinded 50% ethanol extracts showed a slight antibacterial effect on the Staphylococcus aureus and Escherichia coli, while the other extracts showed none. The result suggests that Saururus chinensis extracts by ultra-fine grinding may be more useful than normal grinding as potential sources due to anti-oxidation, angiotensin converting enzyme and xanthine oxidase inhibition.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.30-39
• /
• 2009

Extraction of glomeruli region plays a very important role for diagnosing nephritis automatically. However, it is not easy to extract glomeruli region correctly because the difference between glomeruli region and other region is not obvious, simultaneously unevennesses that is brought in the sampling process and in the imaging process. In this study, a new method for extracting renal glomeruli region using genetic algorithm is proposed. The first, low and high resolution images are obtained by using Laplacian-Gaussian filter with ${\sigma}=2.1$ and ${\sigma}=1.8$, then, binary images by setting the threshold value to zero are obtained. And then border edge is detected from low resolution images, the border of glomeruli is expressed by a closed B-splines' curve line. The parameters that decide the closed curve line with this low resolution image prevent the noises and the border lines from breaking off in the middle by searching using genetic algorithm. Next, in order to obtain more precise border edges of glomeruli, the number of node points is increased and corrected in order from eight to sixteen and thirty two from high resolution images. Finally, the validity of this proposed method is shown to be effective by applying to the real images.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.3 no.1 s.4
• /
• pp.10-18
• /
• 2003

Background: Studies on the pain have been dealing with many different ways for last several centuries. Especially, preemptive analgesia is being used as a method to control the postoperative pain. Many studies on its efficacy have been processed in different ways about various drugs, administration methods and times for various operations. And the value of preemptive analgesia are still controversial regarding the results of other clinical studies. The authors performed a clinical study on efficacy of preemptive analgesia using an non-steroidal anti-inflammatory drug (NSAID) for the surgical extraction of impacted third molar teeth and present the more effective pain treatment after oral surgery with literature review. Methods: Using a randomized double blind test design, this study compared the analgesic efficacies of an NSAID, Talniflumate 370 mg. This drug administrated first either 1 hour preoperatively (experimental group) or when the pain developed moderately to severely over 5 scale of verbal rating scales (0-10) to respective 30 patients undergoing the removal of impacted third molars. Pain intensity and the time from the end of surgery were assessed postoperatively whenever the patients demanded additional drug over 5 scale for forty eight hours using same verbal rating scales. Results: The sex distribution, the age of the patients. and the time required for surgery in two groups were similar. The average first time for demanding additional drug after surgery was 163.9 minutes in experimental group and 191.5 minutes in control group. At this time, the average pain intensity was 5.8 in experimental group and 6.1 in control group. And the average second time for demanding additional drug was 365.5 minutes in experimental group and 351.8 minutes in control group. At this time. the average pain intensities were 6.6 in experimental group and 6.2 in control group. No statistically significant difference was found between the average first times and second times, and the average pain intensities at first and second times in two groups. Conclusions: From these results the efficacy of preemptive analgesia used in this study was not appeared. This clinical study indicates that many NSAIDs administrated preoperatively in present practices have weak efficacy of preemptive analgesia for postoperative pain, thus the authors recommend that only postoperative analgesics are adequate without preoperative use of analgesics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.114-123
• /
• 2016

The effective feature extraction method for unmanned aerial vehicle (UAV) detection is proposed and verified in this paper. The UAV engine sound is harmonic complex tone whose frequency ratio is integer and its variation is continuous in time. Using these characteristic, we propose the feature vector composed of a mean and standard deviation of difference value between fundamental frequency with 1st overtone as well as mean variation of their frequency. It was revealed by simulation that the suggested feature vector has excellent discrimination in target signal identification from various interfering signals including frequency variation with time. By comparing Fisher scores, three features based on frequency show outstanding discrimination of measured UAV signals with low signal to noise ratio (SNR). Detection performance with simulated interference signal is compared by MFCC by using ELM classifier and the suggested feature vector shows 37.6% of performance improvement As the SNR increases with time, the proposed feature can detect the target signal ahead of MFCC that needs 4.5 dB higher signal power to detect the target.

• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.48-55
• /
• 1995

This study was performed to investigate the inhibitory effect of Aloe vera on the growth and aflatoxin production of Aspergillus parasiticus. Spore suspension of A. parasiticus ATCC 15517 was inoculated on the yeast-extract sucrose broth containing 0.1%, 0.5%, 1.0% and 10.0% of chloroform extract of Aloe vera and then incubated at 30$\circ$C for 7 days. Mycelial weight was 160.7 mg/5ml in control group and decreased by the addition of the extract with no significance. The mold caused decrease in pH of the media with and without the extract. pH in the group contained 10.0% of the extract showed significantly higher value of 5.10 than that of 4.90 in control group (p<0.05). Fluorescence spots of four aflatoxins were observed under the 365 nm of UV light after extraction of the media and TLC. In the result of separation and determination by HPLC, the aflatoxins were produced in the order of $B_1, G_1, B_2$ and $G_2$ in all groups. Production of aflatoxins $B_1, B_2$ and $G_1$ was reduced by the addition of the extract and decreased as amount of the extract increased. The production of aflatoxins $B_1$ and $B_2$ significantly reduced when the media contained more than 1.0% of the extract, and $G_1$ more than 0.5%, respectively(p<0.05). No reduction and no significant difference among groups were observed in case of aflatoxin $G_2$. With the above result, the extract of Aloe vera reduced the production of aflatoxin by A. parasiticus though it did not inhibit mycelial growth.

• Journal of Korean Dental Science
• /
• v.6 no.2
• /
• pp.50-57
• /
• 2013

Purpose: Autogenous tooth bone graft is proven to be efficient. We evaluated the bone healing effect and clinical capabilities of autogenous tooth bone materials as a scaffold when growth factor is used together with this material. Materials and Methods: Subjects were those who needed implant placement and bone graft because of missing tooth or alveolar bone defect and who kept their autogenous tooth or needed extraction of other tooth. Group I included autogenous tooth bone graft with growth factor, whereas Group II had only autogenous tooth bone graft. We investigated the bone healing state through computed tomography taken just before surgery and 3 to 4 months after surgery to evaluate the effectiveness of bone graft. Group I had 9 patients, whereas Group II had 5 patients. We compared the pre- and post-operative increase of the Hounsfield unit and bone height by analyzing the computed tomography images. Result: Sinus bone grafts numbered 8 cases, and vertical ridge augmentation was performed together with 3 cases of these. Vertical ridge augmentation was performed in 2 cases, and horizontal ridge augmentation in 1 case alone. Socket graft was done in 3 cases. The post-operative mean value of the Hounsfield unit was 960 in Group I and 836.7 in Group II, but the increase was almost similar, i.e., 636.9 in Group I and 634.7 in Group II on the average. Increase of bone height was 7.6 mm in Group I and 11.1 mm in Group II on the average. This difference was attributable to the fact that most of the cases were sinus bone graft in Group II. Conclusion: In this study, we suggest the possibility of autogenous tooth bone graft materials as a scaffold besides their bone healing ability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.401-409
• /
• 2016

This research investigates into overall oral health status of adolescent girl inmates in a juvenile detention facility and ordinary school students in the same age range of 11 to 18 years old and compares the results focusing on the difference between the two groups. The last 5 years dental records for girl inmates in Juvenile detention facility and for students who have visited the Department of Pediatric Dentistry at Ajou University Hospital was colleted and analyzed. The restorative treatments took up the greatest part in their history of treatments. While the percentage of extractions of permanent teeth due to dental caries had been gradually increased, in Juvenile detention facility students, throughout the transition period from middle school to high school, in dental hospital patients, the phenomenon of the same kind has hardly been detected. After that record analysis, oral examination for Juvenile detention facility students and dental hospital patients was conducted. DMFT index for dental hospital patients are 4.15, whereas, the value for Juvenile detention facility students are as twice as high to be 7.53.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.117-126
• /
• 2006

The purpose of this study is to develop a badge-type passive sampler for the measurement of short-term nitrogen dioxide and to evaluate its performance. The principle of the method is a colorimetric reaction of nitrogen dioxide with sulfanilic acid, N-1-naphthylethylendiamine, and phosphoric acid. First, it has been shown that the filter paper should be rinsed with ultrapure water and ultrasound, and then dried in a vacuumed desiccator. The concentration and volume of absorption reagent (triethanolamine) were $20\%$ and 100 ${\mu}L$, respectively. The extraction time was determined as 60 min. Second, duplicate measurements (n= 116) were carried out for evaluating the precision of the passive sampler. The relative error and the correlation coefficient between duplicates are $3.4\pm 3.0\%$ and 0.994, respectively. In addition, the $95\%$ confidence interval of intraclass correlation coefficient and the estimated value are 0.992$\sim$0.996 and 0.994, respectively. Third, a paired t-test was carried out for evaluating the accuracy of the passive sampler (n=40). In the result of the test, the $95\%$ confidence interval of the difference was -1.710 ppb <$\gamma$< 0.788 ppb. Finally, the average concentration of blanks, measurement detection limit, limit of detection, and limit of quantification are $2.4\pm 0.4$ ppb, 104 ppb, 3.8 ppb, and 7.0 ppb, respectively.

• KCID journal
• /
• v.18 no.2
• /
• pp.87-100
• /
• 2011

This study is to delineate the watershed hydrological parameters such as area, slope, rain gauge weight, NRCS-CN and time of concentration (Tc) by using the Geographic Information Sytem (GIS) technique, and estimation of design flood for an ungauged watershed. Especially, we attempted to determine the Tc of ungauged watershed and develop simple program using the cell-based algorithm to calculates upstream or downstream flow time along a flow path for each cell. For a $19km^2$ watershed of tributary of Nakdong river (Seupmoon), the parameters including flow direction, flow accumulation, watershed boundary, stream network and Tc map were extracted from 30m Agreeburn DEM (Digital Elevation Model) and landcover map. And NRCS-CN was extracted from 30m landcover map and soil map. Design rainfall estimation for two rainfall gauge which are Sunsan and Jangcheon using FARD2006 that developed by National Institute for Disaster Prevention (NIDP). Using the parameters as input data of HEC-l model, the design flood was estimated by applying Clark unit hydrograph method. The results showed that the design flood of 50 year frequency of this study was $8m^3/sec$ less than that of the previous fundamental plan in 1994. The value difference came from the different application of watershed parameter, different rainfall distribution (Huff quartile vs. Mononobe) and critical durations. We could infer that the GIS-based parameter preparation is more reasonable than the previous hand-made extraction of watershed parameters.