• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.337-349
• /
• 2020

In this study, Helikite, Low Altitude Remote Sensing (LARS) platform, was used to acquire coastal images. In the obtained image, the land and water masses were divided using four types of region clustering algorithms, and then waterline was extracted using edge detection. Quantitative comparisons were not possible due to the lack of in-situ waterline data. But, based on the image of the infrared band where water masses and land are relatively clear, the waterlines extracted by each algorithm were compared. As a result, it was found that each algorithm differed significantly in the part where the distinction between water masses and land was ambiguous. This is considered to be a difference in the process of selecting the threshold value of the digital number that each algorithm uses to distinguish the regions. The extraction of waterlines through various algorithms is expected to be used in conjunction with a Low Altitude Remote Sensing system that can be continuously monitored in the future to explain the rapid changes in coastal shape through several years of long-term data from fixed areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.11-36
• /
• 1989

Mandibular movements are guided mainly by three determinants, namely the two posterior controls (the Temporomandibular joints) and the anterior control (the incisal guidance). The aim of this study was to evaluate the incisal guide angle in effort to reconcile a patient's condylar guide angle and incisu guide angle, to develop criteria for incisal guidance in clinical practice. 48 subjects (male 33, female 15) with intact intercuspation, without past history and symptoms of stomatognathic system, were selected for this study. All of the subjects had not anterior prostheses. The sagittal condylar guide angles and incisal guide angles were measured and estimated statistically by cephalogram and articulator (Whip-Mix 8500A). The results of this study were as follows: 1. Average of condylar guide angle was 43.33 degree by cephalogram, and was 35.18 degree by articulator. 95% confidence interval was from 40.43 to 46.23 degrees in cephalogram and was from 32.98 to 37.38 degrees in articulator. 2. Average of incisal guide angle was 51.51 degree by cephalogram, and was 44.11 degree by articulator. 95% confidence interval was from 49.12 to 54.95 degrees in cephalogram and was from 40.67 to 47.56 douses in articulator. 3. Difference between condylar and incisal guide angle was 8.18 degree by cephalogram, and was 8.94 degree by articulator. 95% confidence interval was from 4.61 to 11.74 degrees in cephalogram and was from 4.90 to 12.98 degrees in articulator. 4. In case of the incisal guide angle steeper than condylar guide angle, subjects were 69% (33 of 48) in cephatogram and 75% (36 of 48) in articulator. 5. By the multiple regression equation, condylar guide angle was more influenced by the anterior teeth. 6. When the mandible protrudes from the intercuspal position to the edge to edge position the incisal linear movement was 4.18mm (S.D.:1.30mm) and the condylar linear movement was 4.38mm (S.D.:1.26mm).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.61-71
• /
• 2017

Recently, ground-penetrating radar (GPR) surveys have been actively carried out for precise subsurface void investigation because of the rapid increase of subsidence in urban areas. However, since the interpretation of GPR data was conducted based on the interpreter's subjective decision after applying only the basic data processing, it can result in reliability problems. In this research, to solve these problems, we analyzed the difference between the events generated from subsurface voids and those of strong diffraction sources such as the buried pipeline by applying the edge detection technique, which is one of image processing technologies. For the analysis, we applied the image processing technology to the GRP field data containing events generated from the cavity or buried pipeline. As a result, the main events by the subsurface void or diffraction source were effectively separated using the edge detection technique. In addition, since subsurface voids associated with the subsidence has a relatively wide scale, it is recorded as a gentle slope event unlike the event caused by the strong diffraction source recorded with a sharp slope. Therefore, the directional analysis of amplitude variation in the image enabled us to effectively separate the events by the subsurface void from those by the diffraction source. Interpretation based on these kinds of objective analysis can improve the reliability. Moreover, if suggested techniques are verified to various GPR field data sets, these approaches can contribute to semiautomatic interpretation of large amount of GPR data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.30-39
• /
• 2009

Extraction of glomeruli region plays a very important role for diagnosing nephritis automatically. However, it is not easy to extract glomeruli region correctly because the difference between glomeruli region and other region is not obvious, simultaneously unevennesses that is brought in the sampling process and in the imaging process. In this study, a new method for extracting renal glomeruli region using genetic algorithm is proposed. The first, low and high resolution images are obtained by using Laplacian-Gaussian filter with ${\sigma}=2.1$ and ${\sigma}=1.8$, then, binary images by setting the threshold value to zero are obtained. And then border edge is detected from low resolution images, the border of glomeruli is expressed by a closed B-splines' curve line. The parameters that decide the closed curve line with this low resolution image prevent the noises and the border lines from breaking off in the middle by searching using genetic algorithm. Next, in order to obtain more precise border edges of glomeruli, the number of node points is increased and corrected in order from eight to sixteen and thirty two from high resolution images. Finally, the validity of this proposed method is shown to be effective by applying to the real images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.141-149
• /
• 2007

Associating the shoulder line with head location of the human body is useful in verifying, localizing and tracking persons in an image. Since the head line and the shoulder line, what we call ${\Omega}$-shape, move together in a consistent way within a limited range of deformation, we can build a statistical shape model using Active Shape Model (ASM). However, when the conventional ASM is applied to ${\Omega}$-shape fitting, it is very sensitive to background edges and clutter because it relies only on the local edge or gradient. Even though appearance is a good alternative feature for matching the target object to image, it is difficult to learn the appearance of the ${\Omega}$-shape because of the significant difference between people's skin, hair and clothes, and because appearance does not remain the same throughout the entire video. Therefore, instead of teaming appearance or updating appearance as it changes, we model the discriminative appearance where each pixel is classified into head, torso and background classes, and update the classifier to obtain the appropriate discriminative appearance in the current frame. Accordingly, we make use of two features in fitting ${\Omega}$-shape, edge gradient which is used for localization, and discriminative appearance which contributes to stability of the tracker. The simulation results show that the proposed method is very robust to pose change, occlusion, and illumination change in tracking the head and shoulder line of people. Another advantage is that the proposed method operates in real time.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.79-86
• /
• 2012

An economic ship routing means to sail a ship with a goal of minimizing the fuel consumption by utilizing weather forecast information, and various such systems have been recently studied. For a successful economic ship routing system, an efficient algorithm is needed to search an optimal geographical path, and most of the previous systems were approaching to that problem through a minimal static-cost path search algorithm based on the Dijkstra algorithm. To apply that kind of search algorithm, the cost of every edge assigned with the estimated fuel consumption should be constant. However, that assumption is not practical at all considering that the actual fuel consumption is determined by the weather condition when the ship will pass the edge. To overcome such a limitation, we propose a new optimal ship routing system based on a minimal dynamic-cost path search algorithm by properly modifying the Dijkstra algorithm. In addition, we propose a method which efficiently reduces the search space by using the $A^*$ algorithm to decrease the running time. We compared our system with the shortest path-based sailing method over ten testing routes and observed that the former reduced the estimated fuel consumption than the latter by 2.36% on average and the maximum 4.82% with little difference of estimated time of arrival.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.405-410
• /
• 2021

In this study, a finite element analysis was performed applying a nonlinear material model and fatigue load conditions to evaluate the service life and spring stiffness of the resilient pad for rail fastening system. As a result of the fatigue analysis, the rate of change in spring stiffness compared to the initial condition was about 16%, indicating that fatigue hardening occurred. As for the stress generated in the longitudinal direction of the resilient pad, the difference between the stress generated at the center and the edge was about 10 times or more. In addition, it was analyzed that the equivalent stress of the outer boundary was more than twice as large as that of the central part. Therefore, it was analyzed that the damage and deformation of the resilient pad are the corners of the resilient pad under actual service conditions. The fatigue life diagram of the resilient pad (S-N curve) was derived using the equivalent stress of the resilient pad according to the fatigue cycles. Using the fatigue life diagram of the resilient pad derived in this study, it is considered that it can be used to predict the fatigue life under the relevant conditions by calculating the equivalent stress of the resilient pad under various load conditions.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.375-387
• /
• 2019

The use of drone-based hyperspectral image offers considerable advantages in high resolution remote sensing applications. The primary objective of this study was to select the optimal bands based on hyperspectral image for the estimation yield of the chinese cabbage. The hyperspectral narrow bands were acquired over 403.36 to 995.19 nm using a 3.97 nm wide, 150 bands, drone-based hyperspectral imaging sensor. Fresh weight data were obtained from 2,031 sample for each field survey. Normalized difference vegetation indices were computed using red, red-edge and near-infrared bands and their relationship with quantitative each fresh weights were established and compared. As a result, predominant proportion of fresh weights are best estimated using data from three narrow bands, in order of importance, centered around 697.29 nm (red band), 717.15 nm (red-edge band) and 808.51 nm (near-infrared band). The study determined three spectral bands that provide optimal chinese cabbage productivity in the visible and near-infrared portion of the spectrum.

• Journal of the Korean earth science society
• /
• v.43 no.6
• /
• pp.737-748
• /
• 2022

In this study, the composition of feldspar phenocrysts observed in the Ulleungdo Albong trachyandesite lava dome was identified by performing point and X-ray element mapping surface analysis (EPMA). Plagioclase, which appears as a phenocryst in the Albong trachyandesite, corresponds to bytownite and labradorite, and andesine, and lath in the microphenocrysts and the matrix corresponds to andesine to oligoclase. Alkali feldspar mantled around plagioclase phenocrysts and microphenocrysts correspond to anorthoclase and sanidine. Plagioclase phenocrysts with a distinct zonal structure represent a normal structure in which the An content of the zoning decreases from bytownite to labradorite or andesine as it moves from the center of the phenocrysts to the edge. The edge of the phenocryst is surrounded by alkali feldspar, showing an antirapakivi texture. X-ray mapping of feldspar phenocrysts showed a typical antirapakivi texture. Normal zoning with distinct zoning showing a difference in component composition was clearly shown. The edges were mantled with alkali feldspar, and antirapakivi represents the texture. The antirapakivi texture of feldspar in the Albong trachyandesite may have been formed in the mixing system when alkali feldspar crystallized and mantled around plagioclase phenocrysts and microphenocrysts. This is because plagioclase phenocrysts and microphenocrysts in magma that had already crystallized are more mafic than trachyandesite magma.