• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.129-132
• /
• 1980

The effect of the additive on the dielectric property of TiO2 containing 0-2.5 wt. % ZnO was investigated as a function of frequency $5$\times$10^4$ to $6.3$\times$10^7$ cps and temperature from 25 to 375$^{\circ}C$. The dielectric constant decreased due to increasing density and grain size effect with increasing ZnO concentration.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.938-940
• /
• 1998

In order to improve insulating character and ability of insulating system of power apparatus, the interfacial and complex structure is widely used. However, the interface or complex structure of insulation materials is reported as a weak point which causes breakdown. As the interface of insulation system degrades its electrical property and eventually causes a failure, the datailed phenomenon analysis is reported. The object of this paper is to evaluate dielectric property of PET film with the interface. The $tan{\delta}$ increased with the existence of semiconducting layer and showed prominent decrease as a function of temperature. Also, the $tan{\delta}$ showed prominent increase as a function of frequency. The dielectric properties of interfacial were affected by the interface characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.758-763
• /
• 2000

Dielectric strength of insulators made of epoxy composites rapidly decreases due to ageing to interfaces between the matric resin and filler particles. The adhesion variation of interfaces caused by moisture absorption also alters electrical properties that are the basic characteristics of insulators, particularly, in outdoor use. In this paper, electrical properties of epox/SiO$_2$composites were investigated at boiling absorption condition to observe the influences of moisture. In order to analyze the basic physical properties of samples, scanning electron microscopy and DC, AC and impulse voltage dielectric strength were measured. Also, the breakdown time of samples was measured under AC 6[kV] applied voltage, and the variation of lifetime was verified by using Weibull distribution function.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.52-55
• /
• 2001

We report best dielectric function of ZnS by spectroscopic ellipsometry in the 3.7 - 6.0 eV photon energy range at room temperature. Using proper wet chemical etching procedure, natural overlayer was removed to obtain the pure dielectric function of ZnS, which had a higher <$\xi$$_2$> value at the El band gap peak than that previously reported. We also determined the dielectric property of the natural overlayer on ZnS by following the evolution of <$\xi$$_2$> with chemical etching. We found that the optical property of the overlayer was well described by amorphous semiconductor model.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.5-8
• /
• 2009

The reliability of multilayer ceramic capacitor with active thin dielectric layer was investigated by highly accelerated life test at various stress condition. The distribution of multilayer ceramic capacitor failure times is plotted as a function of time from Weibull distribution function. According to the test result, voltage acceleration factor is obtained from 2.24 to 2.96. The acceleration by temperature is much higher than other values of active thick dielectric layer. It is clear that median time to failure is affected by the stress voltage for high volumetric efficiency ceramic capacitors with active thin dielectric layer. The degradation under stress of voltage involves electromigration and accumulation of oxygen vacancy at Ni electrode interface of cathode.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.382-386
• /
• 2014

The knowledge of substrate material properties is important in antenna design. We present a technique to accurately characterize the dielectric constant and loss tangent of an antenna substrate based on the measurements of antenna's reflection coefficient and bandwidth. In this technique, an error function is formulated by combinations of the reflection coefficient and bandwidth of measured and simulated data, and then an optimization technique is used to efficiently search for the substrate properties that minimize the error function. The results show that the method is effective in retrieving the dielectric constant and loss tangent of the antenna substrate without the need of additional test fixtures as in conventional substrate characterization methods.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.534-542
• /
• 1994

Microstructures and dielectric properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.006Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramic were investigated. The specimens fired in a reducing atmosphere(N$_{2}$) were painted on the surface with CuO paste, and then annealed at 1100.deg. C for 2 hr. SEM and EDAX revealed that CuO penetrated rapidly into the bulk along the grain boundaries during the annealing. Grain size increased with increasing Ca content up to 15[mol%], but decreased with further addition. In the specimens with 10-15[mol%l of Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss(tan .delta[%]) <0.3[%] and capacitance change rate with temperature <.+-.[%], respectively. All the specimens in this study exhibited dielectric relaxation with frequency as a function of the temperature. The dispersive frequency was over 10$^{6}$ [Hz].z].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.794-797
• /
• 2004

The object of investigation is represented by PbxSrl-xTiO3(PST) thin films, which were fabricated by the alkoxide-based sol-gel method on Pt/Ti/SiO2/Si substrate. We have investigated both structural and dielectric properties of PST thin films aimed to tunable microwave device applications as a function of Pb/Sr ratio. PST thin films showedtypical polycrystalline structure with a dense microstructure without secondary phase formation. Dielectric properties of PST films were found as strongly dependent on Pb/Sr composition ratio. Increasing of Pb content leads to simultaneous increasing of both dielectric constant and dielectric loss characteristics of PST films. The figure of merit (FOM) Parameter (FOM : (%) tunability / tan (%)) reached a maximal value of 27.5 corresponding to Pb/Sr ratio of 40/60. The tunability increased with increasing Pb content. The dielectric constants, dielectric loss and tunability of the PST thin films at Pb/sr ratio of 40/60 measured at 100 kHz were 335, 0.0174 and 47.89 %, respectively.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.45-54
• /
• 2012

When the cylindrical wave is incident on a plane dielectric interface from a denser medium to a rarer one, the asymptotic solution for the transmitted wave in the near region is different from the one in the far region. In this paper, we have derived a novel uniform asymptotic solution represented by using the parabolic cylinder function for the transmitted and scattered waves observed in the rarer medium when the cylindrical wave is incident on the plane dielectric interface from the denser medium. The validity of the uniform asymptotic solution has been confirmed by comparing with the reference solution calculated numerically. It has been clarified that the transition wave plays an important role to connect smoothly the asymptotic solution in the near region to the one in the far region through the transition region. We have shown the very interesting phenomenon that the lateral wave type transmitted wave is observed in the far and shallow region.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1167-1173
• /
• 2001

The tetragonal tungsten bronze type of Sr$_{x}Ba_{1-x}Nb_{2}O_{6}$(SBN) (0.3$\le$x$\ge$0.7) ceramics was synthesized by the solid state reaction method, and the dielectric properties of SBN ceramics as a function of Sr/Ba ratio were examined. With increasing Sr/Ba ratio in SBN ceramics, the Curie temperature decreased and the maximum dielectric constant at the Curie temperature increased. The relaxor behavior of the SBN ceramics as a function of Sr/Ba ratio was quantitatively evaluated. More relaxor behavior of dielectric characteristics was observed as the ratio of Sr/Ba increased. The experimental results are explained with a viewpoint of crystallography of tungsten bronze structured SBN ceramics.