• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1065-1070
• /
• 2005

According to the development of embedded systems, they are used in various fields. However, the productivity and the quality of embedded systems are not acceptable because of the hardware environment-oriented development. Several works has proposed new techniques using a formal specification method or complex template, but due to high complexity and low flexibility of the method, it is difficult to be used. Accordingly, this paper presents a new approach to develop embedded device drivers which are kinds of embedded system software. In our approach, we define a light device driver template for ensuring high flexibility and productivity and generate the device driver by incorporating with embedded system information represented by XML. By using XML we consider the design phase in device driver development process for the quality of the driver. Our approach, improves the reusability of embedded device driver and finally, it will improve productivity and quality of embedded system.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.12
• /
• pp.2141-2150
• /
• 2017

This study was conducted to develop a screening method using Colilert-18 and a device for the detection of E. coli from agri-food production environments and fresh vegetables. The specificity and sensitivity of Colilert-18 by temperature ($37^{\circ}C$ and $44^{\circ}C$) were evaluated with 38 E. coli and 78 non-E. coli strains. The false-positive rate was 3.8% (3/78) and 0% (0/78) at $37^{\circ}C$ and $44^{\circ}C$, respectively. The detection limit of E. coli at $37^{\circ}C$ at <1.0 log CFU/250 ml was lower than that at $44^{\circ}C$. The efficiency of the developed device, which comprised an incubator equipped with a UV lamp to detect E. coli in the field, was evaluated by measuring the temperature and UV lamp brightness. The difference between the set temperature and actual temperature of the developed device was about $1.0^{\circ}C$. When applying the developed method and device to various samples, including utensils, gloves, irrigation water, seeds, and vegetables, there were no differences in detection rates of E. coli compared with the Korean Food Code method. For sanitary disposal of culture samples after experiments, the sterilization effect of sodium dichloroisocyanurate (NaDCC) tablets was assessed for use as a substitute for an autoclave. The addition of one tablet of NaDCC per 50 ml was sufficient to kill E. coli cultured in Colilert-18. These results show that the developed protocol and device can efficiently detect E. coli from agri-food production environments and vegetables.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.1-7
• /
• 2017

Objectives: This paper is focused on the development of supporting device for the direct moxibustion. This device makes one help to do moxibustion on one's head and back for oneself. Without this device, one can't avoidthe other's help to do moxibustion on one's head and back. Methods: The design protocols of the supporting device for the direct moxibustion are determined. And 3 dimensional simulation using Ultimaker's 3D printer was carried out. The parts of the supporting device for direct moxibustion are followings: 1. preparing of the main parts which are divided into an acupuncture touching sting and moxa holder. 2. preparing a grip part. Results: 3 different lengths of the acupuncture touching sting such as 3mm, 4mm, and 5mm were experimented for the perfect burning of moxa. Among them, the acupuncture touching sting with 4mm length was best for the perfect burning and for the organic functional tests. Conclusion: The supporting device for direct moxibustion will be helpful to minimize of the burning of skin, the pain, and the smoke.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.20 no.2
• /
• pp.77-84
• /
• 2016

Objectives This paper is focused on the development of supporting device for the direct moxibustion. This device makes one help to do moxibustion on one's head and back for oneself. Without this device, one can't avoid the other's help to do moxibustion on one's head and back. Methods The design protocols of the supporting device for the direct moxibustion are determined. And 3 dimensional simulation using Ultimaker's 3D printer was carried out. The parts of the supporting device for direct moxibustion are followings: 1. preparing of the main parts which are divided into an acupuncture touching sting and moxa holder. 2. preparing a grip part. Results 3 different lengths of the acupuncture touching sting such as 3mm, 4mm, and 5mm were experimented for the perfect burning of moxa. Among them, the acupuncture touching sting with 4mm length was best for the perfect burning and for the organic functional tests. Conclusion The supporting device for direct moxibustion will be helpful to minimize of the burning of skin, the pain, and the smoke.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.739-742
• /
• 1997

A remote drum grappling device coupled to the anti-swing crane has been developed by KAERI to cope with problems involved in manually treating low level waste drums. In order for this grappling device to be operated effectively, multi-sensors including CCD camera were employed. As an activity representation scheme of the device, Extended State Machine (ESM) was used to descibe its operation sequences. The performance testing of the device was conducted successfully, and consequently its application could be extendable to industrial operation environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.597-599
• /
• 2009

We have developed new type of LCD Device which enables switching from reflective to tranmissive LCD mode and vice versa according to brightness of the surrounding. Alternation in these modes are possible by adding on circular polarized sheet and retardation film onto the bottom polarizer which allows the control of the back light and the LCD cell gamma voltage depending on the atmosphere. This method has been evaluated and confirmed by running on the LCD module device in which we have optimized retardation value by Poincare polarizer analysis.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1975-1981
• /
• 2010

In this study, the patent trends for noise barrier and noise reducing device have been analyzed, for the development of adaptive noise barrier according to the transmission characteristics of railway noise. Using patent search engine, keyword searching for patents after 1980 in Korea was performed. The first 667 patents details were reviewed for the extraction core(ie, key) patents. From this review, finally 70 patents were built as DB. From this analysis of core patents, system requirements for development of noise reducing device were obtained.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.1-7
• /
• 2022

Korean medical device industry has laid the foundation for full-fledged growth and development with the G7 medical engineering technology development project that started in 1995, and the medical device production in 2020 increased by 8.52 times and the export by 13.94 times, compared to those in 2001. In early years, electronic medical devices such as ultrasound imaging device contributed greatly to Korean medical industry, but top ranks in medical device production and export in Korea has shifted recently to in vitro diagnostic medical devices and dental implants. However, the share of imported medical devices in the Korean medical device market have not changed much; it still ranges in 60 to 70%, as the Korean medical device industry produces and exports mid- to low-priced medical devices, and technology-intensive and capital-intensive high-priced medical devices are mainly imported. In this paper, we compare the leading medical devices produced by major Korean companies and those by global top medical device companies to suggest strategies for the Korean medical device companies to enter the global market.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.10
• /
• pp.1031-1038
• /
• 2007

A study on the development of control loading system for a pilot command in the helicopter flight training device is performed. The key issue of the device is how to provide closely the real feeling of the stick forces to the trainer during the flight training. Focusing on this proviso and considering the suitable approach than the complexity of the hydraulic system, we adopt the AC servo motor system although its inherent disadvantages such as the torque ripple and the stick-slip friction effect at a low control force. However, we overcome these detrimental effects by introducing the appropriate control device and the robust structural design of the actuating system, thereby the feasibility and applicability to the system can be obtained by showing good performance, meeting the required specification.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.445-450
• /
• 2001

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high data input/output possible. Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. These operational functional requirements are concerned with abilities of optical storage device. Especially, High rotational speed is deeply concerned with the noise and vibration of optical storage device, is important problem in development of optical storage device so much. This paper propose a new concept ROM media of optical storage device named as Cylindrical ROM media, and evaluate this by means of Axiomatic approach and empirical data.