• Journal of Korean Academy of Nursing Administration
• /
• v.11 no.3
• /
• pp.323-333
• /
• 2005

Purpose: The purpose of this study was to development and measure validity and reliability of evaluation tool for clinical nursing practice competency of Nursing students. Method: The participants in this study were 568 nurses who had worked for more than three years above in hospitals. A questionnaire of 79 items was administered to the nurses using a convenience sampling method. The data were collected from Sep. 12th, to Oct. 20th, 2004. Result: The derived outcome tool consisted of 6 factors of direct nursing actions and 6 factors of indirect nursing actions on the basis of 79 items. The 6 factors in direct nursing actions accounted for 76.84% of the variance and 6 factors in indirect nursing actions accounted for 79.68% of the variance on total scale. As a result of the item analysis, 79 items were selected and the internal consistency alpha coefficient was .9917. The value of Cronbach' alpha of direct nursing actions was .9640, indirect nursing actions was .9550. Conclusion: The results of this study show that useful application to the evaluation tool of clinical practice competency of Nursing students and further studies need to be done to verify clinical practice educational evaluation.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.763-769
• /
• 2010

Thanks to the rapid advancement of computational power and development of numerical methods, Computational fluid dynamics techniques are being used widely for the prediction of ship resistance performance. In the present study, an automatic tool was developed to facilitate hull form modification, consequent mesh generation, and flow analysis for parametric study. It is a tedious job to go back and forth between geometry modification and mesh generation for every hull form variation. With the developed tool, users can make multiple hull form variation and their hull form performance prediction easily in a few simple steps. The verification of the developed tool was done by applying it to resistance performance parametric study of a generic POD propulsion cruise ship with different lengths of bow and stern. It is believed that the tool can be extended to more sophisticated hull form variation and help optimize the ship performance more efficiently.

• International Journal of Safety
• /
• v.8 no.2
• /
• pp.31-36
• /
• 2009

In accordance with the development of recent computer technology, railway signaling software became more complex for the intellectualization. Therefore the importance and dependency of railway signaling system on the computer software is getting more increased further, and the testing for the safety and reliability of railway signaling system software became more important. It is started to become influential as very important issue for the reliability and safety of vital embedded software like railway signaling system. The software coding which can have an effect on the safety at the coding level of software shall not be included preferentially, for the safety of software, and must be checked. This thesis suggested an automated testing tool for coding rules on this railway signaling system software, and presented its applied result for railway signaling system software. The testing items in the implemented tool had referred to the international standards in relation to the software for railway system and MISRA-C standards. This automated testing tool for railway signaling system can be utilized at the assessment stage for railway signaling system software also, and it is anticipated that it can be utilized usefully at the software development stage also.

• Quality Improvement in Health Care
• /
• v.5 no.2
• /
• pp.224-237
• /
• 1998

Background : This is an investigative study to analyse the importance of works perceived by Quality Improvement(QI) Coordinators and to evaluate their current work performances using the questionnaires developed by the investigator. Methods : The data were collected from 37 subjects over two weeks period from Oct. 1 to Oct. 17, 1998 and analysed by the descriptive statistics of SPSS program. The items of questionnaire are consisted of 13 work domains including 73 activities based on Quality Management(QM) Coordinator's job description of National Association for Healthcare Quality:data collection & analysis, communication, monitoring, evaluation, accreditation, tool development, policy development, program development, self development, education & trainning, system design, planning, and consultation & support. Results : 1) Of the performances in 13 work domains, the frequencies of the work performed were accreditation(89%), planning(88%), communication(83%), data collection & analysis(82%), monitoring(76%), policy development(72%), consultation & support (71%), education & trainning(70%), self development(68%), evaluation(63%), tool development(61%), program development(44%) and system design(43%) in order. 2) For the importances (1=not important, 5=very important), the policy development(4.46) scored highest then monitoring(4.42), planning(4.41), education & trainning(4.38), communication(4.35), evaluation(4.34) tool development (4.30), data collection & analysis(4.29), program development(4.22), consultation & support(4.22), accreditation(4.15), self development(4.05) and system design(3.98) in order. 3) There was a difference between the work performance and the perceived importance. The results showed the low performances in policy development, monitoring, education & trainning and evaluation which ranked high by the perceived importance and the high performances in accreditation, data collection & analysis, self development, communication and consultation & support which ranked middle to low by the perceived importance. 4) The reasons for low performances of QI Coordinators were the lack of clear assignment for the responsibility and allowed authority for work to QI Coordinators(30.8%), insufficient member of QI Coordinators(13.9%), lack of hospital director's interest(11.5%), low motivation of QI Coordinators (10.6%) and insufficient knowledge & experience of QI Coordinators (8.8%). Conclusion : Most works were perceived important by QI Coordinators, but there was a difference in the work performance. The works performed over 70% were related with accreditation, data collection & analysis, communication, planning and monitoring, on the other hand under 50% in performances were related with system design, program development, tool development and evaluation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.106-113
• /
• 2005

ASDR(Avionic System Development Rig) is used as a development tool during the design and development of the ASC/OFP and then can be used as a maintenance tool after developing them for a military aircraft. This paper describes the overall structure and the important features of KO-1 ASDR, especially about the dynamic simultion of inertial and air data sensors.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.873-874
• /
• 2006

PCBN tools are used worldwide for machining of hardened steel parts in automotive industries. But in heavy interrupted cutting of hardened steel, the tool life is not so stable by sudden breakage of the cutting edge, and total cost of cutting by PCBN is not so economical compared to the grinding. To solve this problem, new PCBN has been developed. New PCBN has very fine and homogeneous microstructure to increase the toughness of sintered body that it provides a reliable tool life for heavy interrupted cutting.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.393-398
• /
• 2001

The technique of high speed machining is widely studied in machining fields, because the high efficiency and accuracy in machining can be obtained in high speed machining. Unfortunately the development of tool for high speed machining in not close behind that of machine tool. In this study, several types flat endmill is prepared for obtaining data according to tool shape. Especially, we concentrated in helix angle, number of cutting edge, rake angle and relief angle. Machinability is measured by cutting force, tool life, tool wear, chip shape and surface roughness according to cutting length. 3-axis cutting forces are acquired from the invented tool dynamometer for high speed machining. Particularly, we found out that the axial cutting force waveform has a good relation with tool wear features. By above results, it is suggested the endmill tool with $45^{\circ}$ helix angle, 6 cutting edge, $-15^{\circ}$ rake angle and $12^{\circ}$ relief angle be suitable for high speed machining

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2016

Micromanufacturing is a useful system for reducing energy consumption. For micromanufacturing, tool clamping and workpiece clamping are important components to realize the machining process. Therefore, a shape memory alloy (SMA) ring type tool holder is developed. In addition, this holder needs cooling and heating processes to execute the tool clamping process. This study suggests a cooling/heating device based on peltier elements. The device will be applied to the heating/cooling process of an automatic tool changer (ATC) for the SMA tool holder. This study introduces the configuration and operating principle of the proposed ATC system. The description and prototype evaluation of this system were given. Plastic bolt and aluminum block were selected to enhance the cooling performance, and the installed tool was changed in 17 s during the experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.189-198
• /
• 1997

This paper presents development of a practical tool deflection compensation system in order to reduce the machining error from the tool deflection compensation system in order to reduce the machining error from the tool deflection in the end-milling process. The devised system is a tool adapter which includes 1-axes force sensor for detecting tool deflection and 2-axes tool tilting device for adjusting tool position through computer interface on line process. Experimental in investigations for typical shaped workpieces representing various end milling situations are performed to verify the ability of the system to suppress the surface errors due to tool deflections. With the system, it is possible to get precise machining surface without any excessive machining error due to increased cutting force in more productive machining conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.47-54
• /
• 1999

Tool wear is one of major causes occurring defectives in NC machining. In this paper we developed an automatic tool compensation system for the NC lathe machining. The system compensates machining error without any help of operators whenever the specification of a part is out of a tolerance. The configuration of the automatic compensation system consists of a NC lathe, an autoloader, a sensor, and a PLC. The system is operated as follows. A workpiece loaded by the autoloader is machining on the NC lathe. Once the workpiece is machined to be turned to a part, it is moved onto the sensor to be measured. If the sensor detects a part out of tolerance, a tool compensation is made in the NC controller. The system gives a help in increasing the productivity by reducing occurrence of defective parts as well as by eliminating time for the tool compensation. Besides the productivity increase, the system calculates cumulative usage time of the tool and notices the tool replace time to a worker by an alarm signal. A case is introduced to show that the system can be applied effectively in a shop.