• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.30-35
• /
• 2007

With the rapid industrialization and civilization development, noise has become a major problem in cities and is a very serious issue for the environment. Noise induced in a factory has a bad influenced on operation efficiency, accuracy and detail of work. The purpose of this paper is to develop a new noise evaluation software for predicting acoustic condition including noise properties during the design of a factory. Majority of commercial softwares for this purpose have been developed in foreign countries and they are quite expensive and hard to use. A new home-made software tool has been developed in the present work, which aimed at providing a more user-friendly environment. The tool developed in this work consists of four major part; the prediction and evaluation of noise in system design, database design, noise analysis development and 3D graphic modeling. The outcome of present work is expected to provide domestic users with a more user-friendly and economic acoustic design tool.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1948-1960
• /
• 1997

Quality of a new system is closly related to the quality of components in reuse repository. Quality assessment is essential to construct a reuse library. Definition of quality and method of assessment are totally different in reuse environments. User interface, functionality, performance are main factor in non-reuse development environment. However, reuse environment needs more reusability, extensibility, generality, and maintainability in quality assessment. This paper describes a development of quality assessment tool for multimedia object reuse conponents. Tool gets reuse components described by C++ or IDL, and analyses style, structure, coupling, strength, complexity, understandability, etc. Ultimatly the tool generate quality satisfaction degree for reuse programmers. Quality assessment services are supported in distributed object architecture, CORBA.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.189-196
• /
• 2014

Automated design program using commercial process integration and optimization program was developed for conceptual design of fighter-class aircraft. Wind tunnel test data and performance analysis results were compared for the verification of analysis tool of this program, and the usefulness of the tool was found. After integration with radar cross section analysis tool, the correlation with configuration design variables of wing, tail and performance parameters was identified by design of experiment, and the optimized configuration for weight and RCS was derived from optimization of empty weight and average frontal RCS value. After parameter definition of fuselage, the program can be implemented for full aircraft configuration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4536-4544
• /
• 2014

This paper proposes a development tool to efficiently develop node software for various operating system platforms in a sensor network. The proposed tool consisted of several modules, such as writing graphical model diagram, PIM and PSM design, code generation, and deployment file generation. Through the proposed tool, the users can graphically draw a sensor network model and design the PIM and PSM of the node software by setting the values of the predefined attributes. The source code of the node software is generated automatically from the PSM using the code templates of the target platform. The deployment files for installing node software on each node are generated automatically. The proposed tool helps the users to develop node software easily for a range of target platforms, even though they do not have details of the low-level information for a sensor network.

• The Journal of Society for e-Business Studies
• /
• v.9 no.3
• /
• pp.129-144
• /
• 2004

CASE tools supporting component based development should include functions for modeling, project management, and supporting other phases activities of the development process. Functional requirements of CASE tools supporting component based development are proposed in this paper. Required functions are identified by analyzing the existing CBD CASE tool, and are categorized into modeling, project management, and supporting other phases activities.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.141-153
• /
• 2012

USM(Unit Service Management System) is the development tool and methodology to handling the event process in a U-City integrated platform by using the minimum unit services. USM can be one of the SOA development methodology. Minimum unit service has a minimum business logic that can be executed with input and output parameters. Minimum unit service consists of three parts : service profile, service input and output parameters and service execution information. USM provides two types of the execution method. One is module execution and the other is web service execution. The development of the event sinario by the USM development methodology can reduce the cost and duration of the u-service development by raising the rate of reusing minimum unit service.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.3-8
• /
• 2002

An intelligent polishing robot automation system is developed. Automatic Tool Change System(A.T.C.), Tool Posture Angle Control, and Robot Program for Polishing Application are developed and integrated into a robotic system that consists of a robot, pneumatic finding tool, and finding abrasives (papers and special films). A.T.C. is specifically designed to exchange whole grinding tool set for complete unmanned operation. Tool Posture Angle Control is developed to give a certain skew angle rather than right angle to tools on the surface for best finishing results. A.T.C. and Tool Posture Angle Control is controlled by a PC and the robot controller. Also, there have been some considerations on enhancing the performance of the system. Some elastic material is inserted between the grinding pad and the holder for better grinding contact. The robot path data is generated automatically from the NC data of previous machining process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.9-16
• /
• 2002

The machinability of Ti-6Al-4V titanium alloy and tool wear behavior in machining of Ti-6Al-4V titanium alloy was studied to understand the machining characteristics. This material is one of the strong candidate materials in present and future aerospace or medical applications. Recently, their usage has already been broaden to everybody's commercial applications such as golf heads, finger rings and many decorative items. To anticipate the general use of this material and development of the titanium alloys in domestic facilities, the review and the study of the machining parameters for those alloys are necessary. This study is concentrated to the machining parameters of the Ti-6A1-4V alloy due to their dominant position in the production of titanium alloys.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.182-190
• /
• 1999

The objective of this study is to develop an analysis scheme in order to predict regrinding due to tool wear in shearing process. The analysis of material now and fracture in shearing process should precede the prediction of tool wear. Thus the developed FE-program to analyze shearing process is used. In order to predict tool wear, the wear model is reformulated as an incremental form and then the wear depth of tool is calculated at each deformation path. Because the regrinding of shearing tool is determined on the basis of allowable size of burr, the analysis of shearing process is iteratively performed using the worn profile of tool. To show the effectiveness of the scheme the simulation result is compared with experimental one.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.55-59
• /
• 2004

Recently, life cycle and lead-time of products have been shortened with the demand of customers. Therefore, it is important to reduce time and cost at the step of manufacturing trial molds. In order to realize three dimensional shape on CAD, the machining process has been widely used because it offers practical advantages such as precision and versatility. However, traditional machining process spends a lot of time in cutting product and the remained material causes trouble such as inconvenience for clean. In this work, a new machining process using the hot tool has been proposed to overcome those limitations. In the process, the hot tool moves the predetermined path and the heat of the tool decomposes the remained material. In order to set up the process, the hot tool to satisfy requirements is designed and the material thermal properties are obtained using the DSC and TGA machine. The relationships between process parameters and thermal radius of the tool are obtained through experiment.