• Journal of Wetlands Research
• /
• v.4 no.2
• /
• pp.1-11
• /
• 2002

The morphology, seed germination, and life history of Salix nipponica were investigated in the wetland of the Nam-River, Jinju, Gyeongsangnam-do, Korea from 2000 to 2001 to provide the basic data necessary for riverine ecosystem restoration through understanding the growth characteristics of Salix nipponica. Salix nipponica had stomata on only lower side and stomata type was paracytic. Salix nipponica produced many small and light seeds. The seed number per mature ament was 1599.4, seed mass of 0.04 mg, and fertilization rate of 66.1%. Seed germination was little affected by light. Germination rate was high and mean germination time was short Under flooding condition, seeds were germinated normally and were viable after as much as 14 days of flooding. But there were no differences under various water depths on germination rates. Tree age was closely correlated with more stem diameter than tree height and there was no difference of growth rate between male and female tree. Growth rate was most rapid for 2 to 3 years after germination, and length growth was almost stopped for more than 11 years even though mass growth was done. Besides even a second-year indivisual was flowered.

• Journal of Embryo Transfer
• /
• v.10 no.3
• /
• pp.251-256
• /
• 1995

This study was experimented that developmental effects of bovine in vitro fertilized embryos by coculture system and supplementation of energy materials into simple media. With the ovaries from slaughter house in vitro maturation by 24h, in vitro fertilization was performed with sperms collected by Percoll gradient method. Fertilized embryos were cocultured in 15% FCS+CZB medium with BOEC(bovine oviductal epithelial cell), GCM (granulosa cell monolayer) and MEFC(mouse embryonic fihrohlast cell). And also in this study, there was trying to improve the early developmental rate of embryos by addition of concentration-controlled Na-pyruvate, D-glucose which were used as energy sources into CZB medium. In vitro developmental rate was confirmed by the cleavage rate of 48h post-IVF and the embryo development rate at 240h culture. In the coculture system BOEC had 20.0% of blastocysts rate, which was higher than that of other coculture systems. To determine the optimum concentration for early embryo developmental rate rapidly, through the gradient of concentrations of Na-pyruvate and D-glucose, we focused on the cleavage rate at 48h and blastocysts rate at 240h. In case of Na-pyruvate, cleavage rate and developmental rate over 3-cell were lower at the concentration of 1.OOrnM than the other treatment concentrations, otherwise the blastocysts rate was higher as 23.2% than the others. That result showed that as like reported group which had higher develop-mental rate over 3-cell was also higher to the blastocysts rate. In case of D-glucose, there was no effects through the concentration changes. It was the result of this study for which the use of BOEC coculture system and 1.OOmM Na-pyruvate as an energy source had an effect upon embryo development.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.299-299
• /
• 2022

Whole wheat is rich in dietary fiber and contains various biological activity substances such as arabinoxylan, phytic acid and phenolic compounds. However, excessive fiber contents of whole wheat has a negative effect on dough formation, making it difficult to process. In this study, we tried to improve the usability of whole wheat by suggesting an appropriate degree of purification of whole wheat from 'Saekeumkang', a domestic wheat cultivar containing protein and gluten suitable for noodle production. The contents of arabinoxylan, phytic acid, and vitamin E were measured in the polishing rate range of 5-20% of whole wheat flour. As the milling ratio increased, the flour properties improved. The arabinoxylan and phytic acid content of whole wheat were 67.95 mg/g and 0.87 mg/g, but when milled at 20%, arabinoxylan and phytic acid were 60% and 80% of whole wheat, respectively. And as the milling ratio increased, the vitamin E content tended to decrease (whole wheat: 4.063 mg/100 g, 20% milled: 2.96 mg/100 g), However, the vitamin E composition ratio did not change. On the other hand, α-tocopherol showed the greatest than other vitamin E isomers. Therefore, further studies needed to optimize milling rate to improve the final product while maintaining the approximate nutritional and functional value of the whole wheat.

• Mycobiology
• /
• v.38 no.3
• /
• pp.180-183
• /
• 2010

This study was conducted out to select a silkworm variety suitable for synnemata production of Isaria tenuipes. Four kinds of the mulberry silkworm varieties, Bombyx mori, were hybridized using a Japanese parental line and a Chinese parental line, and used to test for synemata formation in I. tenuipes. The larval period of normal silkworms was 22 hr longer than the silkworms inoculated with this fungus. Among the silkworm varieties tested, Hachojam had the shortest larval period with 23.02 days. The non-cocooning silkworm had a shorter larval period than the cocoon producing silkworms. The pupation rate of normal silkworms was about 9% higher than that of silkworms sprayed with I. tenuipes. Hachojam had the highest infection rate at 99.8%, but no significant difference was observed for the infection rate by silkworm variety. The production of synnemata was the best in JS171 $\times$ CS188 with an incidence rate of 99.3%, followed by Hachojam, and Chugangjam. The synnemata produced from Hachojam were the heaviest and showed white or milky-white in color.

• Korean Journal of Animal Reproduction
• /
• v.8 no.2
• /
• pp.110-115
• /
• 1984

These experiments were carried out to obtain the information about the optimal pH osmolality affecting in vitro fertilization of the mouse eggs, to elucidate the 2-cell block to development in vitro and to find out the method of controlling the subsequent embryo development in vitro. pH and osomlality was adjusted by adding NaCl or NaHCO3 to the basic salt solution. In vitro fertilization were carried out by inroducting the cumulus masses to the suspension of epididymal spermatozoa at each pH, osmolality, and 10${\mu}$M-EDTA medium. The results obtained in these experiments were summarized as follows: 1. The fertilization rates in vitro at each medium of 235, 252, 269, 286, 306, 323, 345, 368, 393 mosmol were 15.6, 38.2, 65.7, 75.6, 80.9, 74.3, 58.1, 35.1, 24.3, 11.1%, respectively. 2. The fertilization rates in vitro at each medium of pH 6.1, 6.4, 6.7, 7.0, 7.3, 7.6, 7.9, 8.1 were 11.8, 17.9, 32.4, 61.9, 79.5, 76.7, 53.5, 13.6%, respectively. 3. In case of ICR female x ICR male embryos, the development rate of 2-cell embryos to 4-8 cell embryos was 16.2% at normal medium, but the rate was increased to 49.3% in medium containging 10 ${\mu}$M-DETA; In case of C3H female x ICR male embryos, the development rate was 41.0% at normal medium, but the rate was increased to 71.7% at 10 ${\mu}$M-EDTA-medium.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.406-419
• /
• 2018

In planning public service systems such as waterworks, the design population is very important factor. Owing to the limitations of the indirect method, two new models, which take into consideration urban characteristics, were developed to accurately predict external migration rate (EMR), which is an essential component in estimating reliably the design population. The root mean square error (RMSE) between the model values and observed values were 10.12 and 15.58 for the metropolitan cities and counties respectively and were lower compared to RMSE values of 27.31 and 28.79 obtained by the indirect method. Thus, the developed models provide a more accurate estimate of EMR than the indirect method. In addition, the major influencing factors for external migration in counties were development type, ageing index, number of businesses. On the other hand, the major influencing migration factors for cities were project scale, distance to city center, manufacturing size, population growth rate and residential environment. Future medium and long-term studies would be done to identify emerging trends to appropriately inform policy making.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.129-133
• /
• 1995

Continuous fermentations were performed in order to investigate the effect of culture condition on the yeast RNA accumulation and autolysis efficiency. The content of intracellular RNA increased with increasing dilution rate, showing its maximum value of 14.8% at D=0.35 $h^{-1}$. Also, both RNA productivity and specific RNA productivity tended to increase with the increase of dilution rate. The maximum biomass was obtained at $30^{\circ}C$ in the fixed dilution rate of 0.2 $h^{-1}$, whereas the maximum RNA content appeared at the lowest temperature experimented. Growth rate affected significantly on the yeast autolysis efficiency such that the extraction ratio(TN/TN) increased with increasing growth rate, whereas the hydrolysis ratio(AN/TN) was reversed. On the other hand, its efficiency was little affected by cultivation temperature.

• Computers and Concrete
• /
• v.9 no.4
• /
• pp.311-325
• /
• 2012

In this paper, we examine the behavior of the High-Rate Brittle Microplane (HRBM) concrete model based on a series of penetration experiments. These experiments were conducted with three different slab thicknesses (127, 216 and 254 mm) that provided a significant challenge for the numerical simulations. The 127 mm slab provided little resistance, the 216 mm slab provided nominal resistance and the 254 mm slab approached the perforation limit thickness of the projectile. These experiments provide a good baseline for evaluating material models since they have been shown to be extremely challenging; in fact, we have not encountered many material models that can provide quantitatively predictive results in terms of both projectile exit velocity and material damage. In a companion paper, we described the HRBM material model and its fit to various quasi-static material property data for WES-5000 concrete. In this paper, we show that, when adequately fit to these quasi-static data, the HRBM model does not have significant predictive capabilities, even though the quasi-static material fit may be exceptional. This was attributed to the rate-dependent response of the material. After various rate effects were introduced into the HRBM model, the quantitative predictive nature of the calculations dramatically increased. Unfortunately, not much rate-dependent material property data are in the literature; hence, accurate incorporation of rate effects into material models is difficult. Nonetheless, it seems that rate effects may be critical in obtaining an accurate response for concrete during projectile perforation events.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.2
• /
• pp.213-222
• /
• 2023

This paper mainly studies the relationship between financial development, inbound tourism development, and economic growth rate in Fujian Province, China. This study uses the data of real GDP, foreign exchange income from international tourism, and financial interrelations ratio from 1994 to 2019. In the analysis process, the Johansen cointegration test is first used to analyze whether the three have a long-term equilibrium relationship. Then the vector error correction model is established to test the restrictive relationship among the three. Next, the Granger causality test assesses whether the three have a causal relationship. Finally, the contribution rate of the three is analyzed by variance decomposition. The above methods show the following conclusions: first, the three have a long-term equilibrium relationship. Secondly, in the short term, local economic growth is constrained by inbound tourism and financial development. Thirdly, there is a causal relationship between economic growth and inbound tourism in Fujian, while there is a unidirectional causal relationship between financial development and economic growth, financial development, and inbound tourism. Fourthly, the contribution rate of inbound tourism to economic growth fluctuations in Fujian is higher than that of financial development.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1090-1097
• /
• 2007

Genomic analysis of Thermococcus sp. NA1 revealed the presence of a 3,927-base-pair (bp) family B-type DNA polymerase gene, TNA1_pol. TNA1_pol, without its intein, was overexpressed in Escherichia coli, purified using metal affinity chromatography, and characterized. TNA1_pol activity was optimal at pH 7.5 and $75^{\circ}C$. TNA1_pol was highly thermostable, with a half-life of 3.5h at $100^{\circ}C$ and 12.5h at $95^{\circ}C$. Polymerase chain reaction parameters of TNA1_pol such as error-rate, processivity, and extension rate were measured in comparison with rTaq, Pfu, and KOD DNA polymerases. TNA1_pol averaged one incorrect bp every 4.45 kilobases (kb), and had a processivity of 150 nucleotides (nt) and an extension rate of 60 bases/s. Thus, TNA1_pol has a much faster elongation rate than Pfu DNA polymerase with 7-fold higher fidelity than that of rTaq.