• Clean Technology
• /
• v.30 no.1
• /
• pp.37-46
• /
• 2024

Environmental problems caused by plastic waste have been continuously growing around the world, and plastic waste is increasing even faster after COVID-19. In particular, PP and PE account for more than half of all plastic production, and the amount of waste from these two materials is at a serious level. As a result, researchers are searching for an alternative method to plastic recycling, and plastic pyrolysis is one such alternative. In this paper, a numerical study was conducted on the pyrolysis behavior of non-condensable gas to predict the chemical reaction behavior of the pyrolysis gas. Based on gas products estimated from preceding literature, the behavior of non-condensable gas was analyzed according to temperature and residence time. Numerical analysis showed that as the temperature and residence time increased, the production of H₂ and heavy hydrocarbons increased through the conversion of the non-condensable gas, and at the same time, the CH₄ and C₆H₆ species decreased by participating in the reaction. In addition, analysis of the production rate showed that the decomposition reaction of C₂H₄ was the dominant reaction for H₂ generation. Also, it was found that more H₂ was produced by PE with higher C₂H₄ contents. As a future work, an experiment is needed to confirm how to increase the conversion rate of H₂ and carbon in plastics through the various operating conditions derived from this study's numerical analysis results.

• Journal of Korean Elementary Science Education
• /
• v.43 no.3
• /
• pp.415-432
• /
• 2024

This study developed and applied the teacher education model and its principles for science classes using Virtual and Augmented Reality (VR/AR) content and analyzed preservice elementary teachers' feedback on the teacher education model and the changes in their perceptions as to the use of VR/AR content. First, existing Technological Pedagogical Content Knowledge (TPACK) teacher education models and prior studies on the use of the VR/AR contents were reviewed to derive the teacher education model to cultivate the VR/AR-TPACK and set the key principles for each of its stages. The developed teacher education model has five stages: exploration, mapping, collaborative design, practice, and reflection. Second, to examine the appropriateness of the model's five stages and principles, we applied it within the regular course of instruction at the university of education, which was attended by 25 preservice elementary teachers. This study collected data from surveys on the perception of the usage of VR/AR contents before and after the course, as well as the group lesson plans prepared by the preservice teachers, and their feedback on the teacher education model. The feedback on the teacher education model and the survey conducted by the preservice teachers before and after the course were analyzed through open coding and categorization. As a result, most preservice teachers expressed positive opinions about the activities and experiences at each stage of the implementation of the teacher education model. Perceptions related to the usage of the VR/AR content changed in three aspects: first, the vague positive perception of the VR/AR content has changed to a positive perception based on specific educational affordance. Second, they recognized the need for preparedness by anticipating potential problems associated with the use of the VR/AR content. Third, they came to view the VR/AR contents as a useful instructional resource that the teachers could use. Based on these results, we discussed the implications for the VR/AR-TPACK teacher education model and assessed the limitations of the research.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.52-62
• /
• 2016

Smart City is urban development for complex problem solving that provides convenience and safety for citizens, and it is a blueprint for future cities. In 2008, the Korean government defined the construction, management, and government support of U-Cities in the legislation, Act on the Construction, Etc. of Ubiquitous Cities (Ubiquitous City Act), which included definitions of terms used in the act. In addition, the Minister of Land, Infrastructure and Transport has established a "ubiquitous city master plan" considering this legislation. The concept of U-Cities is complex, due to the mix of informatization and urban planning. Because of this complexity, the foundation of relevant regulations is inadequate, which is impeding the establishment and implementation of practical plans. Smart City intelligent service facilities are not easy to define and classify, because technology is rapidly changing and includes various devices for gathering and expressing information. The purpose of this study is to complement the legal definition of the intelligent service facility, which is necessary for integrated management and operation. The related laws and regulations on U-City were analyzed using text-mining techniques to identify insufficient legal definitions of intelligent service facilities. Using data gathered from interviews with officials responsible for constructing U-Cities, this study identified problems generated by implementing intelligent service facilities at the field level. This strategy should contribute to improved efficiency management, the foundation for building integrated utilization between departments. Efficiencies include providing a clear concept for establishing five-year renewable plans for U-Cities.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.355-372
• /
• 2006

Mission opportunities and trajectory characteristics for the future Korean Mars mission have designed and analyzed using KSIV-III(Korea Space Launch Vehicle-III). Korea's first space center, 'NARO space center' is selected as a launch site. For launch opportunities, year 2033 is investigated under considering the date of space center's completion with KSLV series development status. Optimal magnitude of various maneuvers, Trans Mars Injection (TMI) maneuver, Trajectory Correction Maneuver (TCM), Mars Orbit Insertion (MOI) maneuver and Orbit Trim Maneuver(OTM), which are required during the every Mars mission phases are computed with the formulation of nonlinear optimization problems using NPSOL software. Finally, mass budgets for upper stage (launcher for KSIV-III and spacecraft are derived using various optimized maneuver magnitudes. For results, daily launch window from NARO space center for successful Korean Mars mission is avaliable for next 27 minutes starting from Apr. 16. 2033. 12:17:26 (UTC). Maximum spacecraft gross mass which can delivered to Mars is about 206kg, with propellant mass of 109kg and structure mass of 97kg, when on board spacecraft thruster's Isp is assumed to have 290 sec. For upper stage, having structure ratio of 0.15 and Isp value of 280 sec, gross mass is about 1293kg with propellant mass of 1099kg and structure mass of 194kg. However, including 10% margins to computed optimal maneuver values, spacecraft gross mass is reduced to about 148kg with upper stage's mass of 1352kg. This work will give various insights, requiring performances to developing of KSIV-III and spacecraft design for future Korean Mars missions.

• Journal of Korean Society of Forest Science
• /
• v.28 no.1
• /
• pp.50-66
• /
• 1975

Since it is an undeniable fact that the so-called illegal field-burning cultivation is directly implicated in the causes of forest devastation, land erosion, and drought and flood, thus, barring the nation from a well-balanced economic growth, the policy to exterminate its practices must have the topmost priority. Eighty percent of Gangweon-do is mountain forests and naturally of all others this province has the largest area of illegally burned hill-side farminglands, stubbornly retarding the provincial development policy as well as directly causing tremendous forest damages. In 1965 a 7-year plan mapped out to rehabilitate these gypsy type field burning farmers only to be suspended in 1968 to give way to the mandatory project of clearing the isolated farmsteads set in deep mountain to circumvent the guerilla forces signaled by the so-called Samcheok-Uljin area infiltration. In the meantime, new hordes of roving farmers burned the forests, working a renewed havoc. To cope with this situation, the provincial government, taking the year 1973 as a planning year, launched another three year project (1974-76) and has been enforcing the rehabilitation project mobilizing the whole administrative power. Whether or not this project will succeed solely depends upon whether the forcedly rehabilitated roving farmers can really establish self-supporting homesteads. Among the various difficulties facing the newly established homesteaders are: (1) First of all, the homesteaders must be given money-earning jobs. (2) Financial supports or subsidies must be provided them with which to establish self-supporting homesteads. (3) Private enterprises as well as public organizations must offer them jobs with priority. (4) The rehabilitated rovers themselves must establish self-supporting homesteads before expecting the external assistance. (5) The rehabilitated rovers themselves must have the spirit of self-help, welcoming all levels and all kinds of jobs. (6) The rural revitalization movement must expand the self-help reconstruction projects to give them the opportunity to work. (7) All citizen in the province must receive and protect them with brethren love. (8) The evacuated burned-forests must be reforestrated with the principle of "best trees to the best lands". (9) The seedlings of species that the forest owners select must anyhow be secured and supplied (10) The organization and function of the village forestry association must be strengthened to take effective care of the reforestated burned-forests.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.193-215
• /
• 2022

Recently, ground structures have reached saturation, and underground construction using underground structures such as tunnels has been in the spotlight as a way to solve increasing traffic difficulties and environmental problems. However, due to the increasing number of underground structures, close construction is inevitable for continuous underground development. When a new underground structure is constructed closely, stability may become weak due to the influence on the existing tunnel, which may cause collapse. Therefore, analyzing the stability of existing tunnels due to new structures is an essential consideration. In this study, the effect of excavating new tunnels under parallel tunnels on existing parallel tunnels was analyzed using numerical analysis. Using the Displacement Control Model (DCM), the volume loss generated during construction was simulated into three case (0.5%, 1.0%, and 1.5%). Based on the center of the pillar, the distance where the new tunnel is located was set to 5 m, 6 m, 7 m, 8 m, 9 m, and the space for each distance were set to 5 (0D₁, 0.37D₁, 0.75D₁, 1.13D₁, 1.5D₁). In general, as the volume loss increased and the distance approached, the maximum displacement and angular displacement increased, and the strength/stress ratio to evaluate the stability of the pillar also decreased. As a result, when the distance between the new tunnel and the center of the pillar is 5 m, the space is 0D₁, and the volume loss is 1.5%, the stability of the existing parallel tunnel is the weakest.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.136-143
• /
• 2021

Pacific island countries, including Kiribati, are suffering from a shortage of essential resources as well as a reduction in their living space due to sea level rise and coastal erosion from climate change, groundwater pollution and vegetation changes. Global activities to solve these problems are being progressed by the UN's efforts to implement SDGs. Pacific island countries can adapt to climate change by using abundant marine resources. In other words, seawater plants can assist in achieving SDGs #2, #6 and #7 based on SDGs #14 in these Pacific island countries. Under the auspice of Korea International Cooperation Agency (KOICA), Korea Research Institute of Ships and Ocean Engineering (KRISO) established the Sustainable Seawater Utilization Academy (SSUA) in 2016, and its 30 graduates formed the SSUA Kiribati Association in 2017. The Ministry of Oceans and Fisheries (MOF) of the Republic of Korea awarded ODA fund to the Association. By taking advantage of seawater resource and related plants, it was able to provide drinking water and vegetables to the local community from 2018 to 2020. Among the various fields of education and practice provided by SSUA, the Association hope to realize hydroponic cultivation and seawater desalination as a self-support project through a pilot project. To this end, more than 140 households are benefiting from 3-stage hydroponics, and a seawater desalination system in connection with solar power generation was installed for operation. The Association grows and supplies vegetable seedlings from the provided seedling cultivation equipment, and is preparing to convert to self-support business from next year. The satisfaction survey shows that Tarawa residents have a high degree of satisfaction with the technical support and its benefits. In the future, it is hoped that SSUA and regional associations will be distributed to neighboring island countries to support their SDGs implementations.

• Journal of Intelligence and Information Systems
• /
• v.29 no.4
• /
• pp.229-256
• /
• 2023

The increase in telecommuting and household electricity demand due to the pandemic has led to significant changes in electricity demand patterns. This has led to difficulties in identifying KEPCO's PPA (power purchase agreements) and residential solar power generation and has added to the challenges of electricity demand forecasting and grid operation for power exchanges. Unlike other energy resources, electricity is difficult to store, so it is essential to maintain a balance between energy production and consumption. A shortage or overproduction of electricity can cause significant instability in the energy system, so it is necessary to manage the supply and demand of electricity effectively. Especially in the Fourth Industrial Revolution, the importance of data has increased, and problems such as large-scale fires and power outages can have a severe impact. Therefore, in the field of electricity, it is crucial to accurately predict the amount of power generation, such as renewable energy, along with the exact demand for electricity, for proper power generation management, which helps to reduce unnecessary power production and efficiently utilize energy resources. In this study, we reviewed the renewable energy generation forecasting system, its objectives, and practical applications to construct optimal aggregated power resources using data from 169 power plants provided by the Ministry of Trade, Industry, and Energy, developed an aggregation algorithm considering the settlement of the forecasting system, and applied it to the analytical logic to synthesize and interpret the results. This study developed an optimal aggregation algorithm and derived an aggregation configuration (Result_Number 546) that reached 80.66% of the maximum settlement amount and identified plants that increase the settlement amount (B1783, B1729, N6002, S5044, B1782, N6006) and plants that decrease the settlement amount (S5034, S5023, S5031) when aggregating plants. This study is significant as the first study to develop an optimal aggregation algorithm using aggregated power resources as a research unit, and we expect that the results of this study can be used to improve the stability of the power system and efficiently utilize energy resources.

• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.919-928
• /
• 2023

Rainfall characteristics in Korea are concentrated during the summer flood season. In particular, when a large amount of turbid water flows into the dam due to the increasing trend of concentrated rainfall due to abnormal rainfall and abnormal weather conditions, prolonged turbid water phenomenon occurs due to the overturning phenomenon. Much research is being conducted on turbid water prediction to solve these problems. To predict turbid water, turbid water data from the upstream inflow is required, but spatial and temporal data resolution is currently insufficient. To improve temporal resolution, the development of the Turbidity-SS conversion equation is necessary, and to improve spatial resolution, multi-item water quality measurement instrument (YSI), Laser In-Situ Scattering and Transmissometry (LISST), and hyperspectral sensors are needed. Sensor-based measurement can improve the spatial resolution of turbid water by measuring line and surface unit data. In addition, in the case of LISST-200X, it is possible to collect data on particle size, etc., so it can be used in the Turbidity-SS conversion equation for fraction (Clay: Silt: Sand). In addition, among recent remote sensing methods, the spatial distribution of turbid water can be presented when using UAVs with higher spatial and temporal resolutions than other payloads and hyperspectral sensors with high spectral and radiometric resolutions. Therefore, in this study, the Turbidity-SS conversion equation was calculated according to the fraction through laboratory analysis using LISST-200X and YSI-EXO, and sensor-based field measurements including UAV (Matrice 600) and hyperspectral sensor (microHSI 410 SHARK) were used. Through this, the spatial distribution of turbidity and suspended sediment concentration, and the turbidity calculated using the Turbidity-SS conversion equation based on the measured suspended sediment concentration, was presented. Through this, we attempted to review the applicability of the Turbidity-SS conversion equation and understand the current status of turbid water occurrence.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.